# LDC2114PWR

**Texas Instruments** · ADCs/DACs - Special Purpose · TSSOP-16

LDC2114PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COM | passive | Common return current path for all LC resonator sensors; a capacitor must be connected from this pin to GND (see Setting COM Pin Capacitor). |
| 2 | GND | power_in | Ground; both GND pins should be connected to the system ground on the PCB. |
| 3 | LPWRB | input | Normal/low-power mode select: set to VDD for Normal Power Mode or to ground for Low Power Mode. |
| 4 | VDD | power_in | Power supply; recommended operating range 1.71 V to 1.89 V (1.8 V nominal), absolute maximum 2.2 V. |
| 5 | INTB | output | Interrupt output; polarity can be configured in Register 0x11. |
| 6 | IN3 | passive | Channel 3 LC sensor input. |
| 7 | IN2 | passive | Channel 2 LC sensor input. |
| 8 | IN1 | passive | Channel 1 LC sensor input. |
| 9 | IN0 | passive | Channel 0 LC sensor input. |
| 10 | GND | power_in | Ground; both GND pins should be connected to the system ground on the PCB. |
| 11 | OUT3 | output | Channel 3 logic output; polarity can be configured in Register 0x1C. |
| 12 | OUT2 | output | Channel 2 logic output; polarity can be configured in Register 0x1C. |
| 13 | OUT1 | output | Channel 1 logic output; polarity can be configured in Register 0x1C. |
| 14 | SDA | bidirectional | I2C data line. |
| 15 | OUT0 | output | Channel 0 logic output; polarity can be configured in Register 0x1C. |
| 16 | SCL | input | I2C clock input. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |

## CAD (KiCad official)

- Symbol: `LDC2114PWR`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `ldc2114pwr-etched.step` / `ldc2114pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ldc2114pwr.step` / `ldc2114pwr.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ldc2114.pdf) (54 pp, sha256 `dc8c3ae657278c0e`, retrieved 2026-10-08, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ldc2114pwr-datasheet.pdf)