component
LDC2114PWR
Public Made by Adomby adom
Texas Instruments ADCs/DACs - Special Purpose, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# LDC2114PWR++**Texas Instruments** · ADCs/DACs - Special Purpose · TSSOP-16++LDC2114PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COM | passive | Common return current path for all LC resonator sensors; a capacitor must be connected from this pin to GND (see Setting COM Pin Capacitor). |+| 2 | GND | power_in | Ground; both GND pins should be connected to the system ground on the PCB. |+| 3 | LPWRB | input | Normal/low-power mode select: set to VDD for Normal Power Mode or to ground for Low Power Mode. |+| 4 | VDD | power_in | Power supply; recommended operating range 1.71 V to 1.89 V (1.8 V nominal), absolute maximum 2.2 V. |+| 5 | INTB | output | Interrupt output; polarity can be configured in Register 0x11. |+| 6 | IN3 | passive | Channel 3 LC sensor input. |+| 7 | IN2 | passive | Channel 2 LC sensor input. |+| 8 | IN1 | passive | Channel 1 LC sensor input. |+| 9 | IN0 | passive | Channel 0 LC sensor input. |+| 10 | GND | power_in | Ground; both GND pins should be connected to the system ground on the PCB. |+| 11 | OUT3 | output | Channel 3 logic output; polarity can be configured in Register 0x1C. |+| 12 | OUT2 | output | Channel 2 logic output; polarity can be configured in Register 0x1C. |+| 13 | OUT1 | output | Channel 1 logic output; polarity can be configured in Register 0x1C. |+| 14 | SDA | bidirectional | I2C data line. |+| 15 | OUT0 | output | Channel 0 logic output; polarity can be configured in Register 0x1C. |+| 16 | SCL | input | I2C clock input. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `LDC2114PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `ldc2114pwr-etched.step` / `ldc2114pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ldc2114pwr.step` / `ldc2114pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ldc2114.pdf) (54 pp, sha256 `dc8c3ae657278c0e`, retrieved 2026-10-08, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ldc2114pwr-datasheet.pdf)
page.jsonadded+248@@ -0,0 +1,248 @@+{+ "slug": "ldc2114pwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments ADCs/DACs - Special Purpose, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "data acquisition",+ "ldc2114pwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ldc2114pwr.kicad_sym",+ "ldc2114pwr.kicad_mod",+ "ldc2114pwr.glb",+ "ldc2114pwr.step",+ "ldc2114pwr.lbr",+ "docs/hero.png",+ "docs/ldc2114pwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ldc2114pwr-hero.glb",+ "ldc2114pwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "LDC2114PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Data Acquisition",+ "subcategory": "ADCs/DACs - Special Purpose",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ldc2114.pdf",+ "parts": {+ "symbol": "ldc2114pwr.kicad_sym",+ "footprint": "ldc2114pwr.kicad_mod",+ "model_3d": "ldc2114pwr-hero.glb",+ "model_3d_plain": "ldc2114pwr.glb",+ "model_3d_step": "ldc2114pwr-etched.step",+ "model_3d_step_plain": "ldc2114pwr.step",+ "lbr": "ldc2114pwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2667117",+ "digikey": "296-LDC2114PWRTR-ND",+ "mouser": "595-LDC2114PWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T20:08:37Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-LDC2114PWRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-LDC2114PWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "COM",+ "type": "passive",+ "description": "Common return current path for all LC resonator sensors; a capacitor must be connected from this pin to GND (see Setting COM Pin Capacitor)."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground; both GND pins should be connected to the system ground on the PCB."+ },+ {+ "number": "3",+ "name": "LPWRB",+ "type": "input",+ "description": "Normal/low-power mode select: set to VDD for Normal Power Mode or to ground for Low Power Mode."+ },+ {+ "number": "4",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply; recommended operating range 1.71 V to 1.89 V (1.8 V nominal), absolute maximum 2.2 V."+ },+ {+ "number": "5",+ "name": "INTB",+ "type": "output",+ "description": "Interrupt output; polarity can be configured in Register 0x11."+ },+ {+ "number": "6",+ "name": "IN3",+ "type": "passive",+ "description": "Channel 3 LC sensor input."+ },+ {+ "number": "7",+ "name": "IN2",+ "type": "passive",+ "description": "Channel 2 LC sensor input."+ },+ {+ "number": "8",+ "name": "IN1",+ "type": "passive",+ "description": "Channel 1 LC sensor input."+ },+ {+ "number": "9",+ "name": "IN0",+ "type": "passive",+ "description": "Channel 0 LC sensor input."+ },+ {+ "number": "10",+ "name": "GND",+ "type": "power_in",+ "description": "Ground; both GND pins should be connected to the system ground on the PCB."+ },+ {+ "number": "11",+ "name": "OUT3",+ "type": "output",+ "description": "Channel 3 logic output; polarity can be configured in Register 0x1C."+ },+ {+ "number": "12",+ "name": "OUT2",+ "type": "output",+ "description": "Channel 2 logic output; polarity can be configured in Register 0x1C."+ },+ {+ "number": "13",+ "name": "OUT1",+ "type": "output",+ "description": "Channel 1 logic output; polarity can be configured in Register 0x1C."+ },+ {+ "number": "14",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C data line."+ },+ {+ "number": "15",+ "name": "OUT0",+ "type": "output",+ "description": "Channel 0 logic output; polarity can be configured in Register 0x1C."+ },+ {+ "number": "16",+ "name": "SCL",+ "type": "input",+ "description": "I2C clock input."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The LDC2114 pin table on page 4 is cut off after the SDA row, so the I2C address-select (ADDR) pin i; Pin types for IN0-IN3 and COM are analog connections in the datasheet, mapped to KiCad 'passive'. Th"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0575,+ "at": "2026-10-08T20:08:13"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/ldc2114.pdf",+ "pages": 54,+ "sha256": "dc8c3ae657278c0e",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ldc2114pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ldc2114pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cd34a460767d5cfb0da061e0798c95a5c0c75acbec9eb6778005744943ea8be5",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}