main
Ray ld7552bps: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) bebc770
{
  "schema_version": 1,
  "type": "component",
  "slug": "ld7552bps",
  "title": "LD7552BPS",
  "brief": "Leadtrend Tech AC-DC Controllers and Regulators, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "pmic",
    "ld7552bps"
  ],
  "component": {
    "mpn": "LD7552BPS",
    "manufacturer": "Leadtrend Tech",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "PMIC",
    "subcategory": "AC-DC Controllers and Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/6d237f9617364711baace380af0f9e61.pdf",
    "parts": {
      "symbol": "ld7552bps.kicad_sym",
      "footprint": "ld7552bps.kicad_mod",
      "model_3d": "ld7552bps-etched.glb",
      "model_3d_plain": "ld7552bps.glb",
      "model_3d_step": "ld7552bps-etched.step",
      "model_3d_step_plain": "ld7552bps.step",
      "lbr": "ld7552bps.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return. Reference for VCC, gate driver source current, and current-sense signal."
      },
      {
        "number": "2",
        "name": "COMP",
        "type": "input",
        "description": "Voltage feedback / loop compensation pin (equivalent to the COMP pin in UC384X). A secondary-side TL431 drives an opto-coupler that pulls this pin to close the regulation loop. Internal 6.0V open-loop voltage with 1/3 divider and 2 diode offsets feeds the PWM comparator. OLP trips when VCOMP exceeds 5.0V for >60ms (at 65kHz); pulling below 1.2V shuts off the output."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input (Abs Max 30V). UVLO turn-on 16V, turn-off 10V. OVP trips at 28.0V (auto-recovery, hiccup). Startup current <20µA; operating current ~2.0-3.0mA. Pin 3 and Pin 7 are internally the same VCC node."
      },
      {
        "number": "4",
        "name": "RT",
        "type": "input",
        "description": "Oscillator programming pin. Connect a resistor from RT to GND to set the switching frequency: fSW(kHz) = 65 × 100kΩ / RT(kΩ). Recommended operating range 50-130kHz; typical 65kHz at RT=100kΩ. RT short-to-ground or RT-floating triggers fault protection."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No-connect pin. Leave floating or tie to GND per PCB-layout preference."
      },
      {
        "number": "6",
        "name": "CS",
        "type": "input",
        "description": "Current-sense input from the primary MOSFET source resistor (Rs). Maximum threshold 0.85V (Ipeak_max = 0.85V / Rs). 350ns leading-edge blanking (LEB) suppresses turn-on spikes; 1MΩ input impedance, ~100ns delay to output. Abs Max -0.3 to +7V. Pin-floating triggers fault protection."
      },
      {
        "number": "7",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage pin (same VCC net as pin 3). Bonded to pin 3 internally; both should be tied together at the VCC bypass capacitor to share bond-wire current for the 500mA gate driver."
      },
      {
        "number": "8",
        "name": "OUT",
        "type": "output",
        "description": "CMOS gate-drive output for the external power MOSFET. Typical 500mA source/sink capability. Output-high ≈ VCC-6V (>9V at VCC=15V, Io=20mA); output-low <1V. Rise time ≈50ns, fall time ≈30ns into 1nF. Maximum duty cycle limited to 75% to prevent transformer saturation."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/6d237f9617364711baace380af0f9e61.pdf",
        "pages": null,
        "sha256": "fff64f619363d956",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ld7552bps.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ld7552bps-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "2d42a3f48584db1f9dac3c13d787749f89a7053d25a82e1ae6757a6cc0d65f3b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Leadtrend Tech",
      "Package": "SOP-8",
      "Category": "PMIC",
      "Pins": "8"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ld7552bps"
  ],
  "discovery_pitch": "LD7552BPS (Leadtrend Tech) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ld7552bps.kicad_sym",
    "ld7552bps.kicad_mod",
    "ld7552bps.glb",
    "ld7552bps.step",
    "ld7552bps.lbr",
    "docs/hero.png",
    "docs/ld7552bps-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ld7552bps-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "LD7552BPS",
      "kind": "packaging"
    },
    {
      "mpn": "LD7552BPSGS",
      "kind": "packaging"
    },
    {
      "mpn": "LD7552BPSPN",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-24T23:51:09.667Z"
}