Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LD39020DTPU25R
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-4(1x1)
LD39020DTPU25R from STMicroelectronics, in a DFN-4(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output voltage capable of supplying up to 200 mA of output current |
| 2 | GND | power_in | Common ground and current return path |
| 3 | EN | input | Enable logic input; low logic level (≤ 0.4 V) disables device, high logic level (≥ 1 V) enables operation |
| 4 | IN | power_in | Input power supply voltage with operating range from 1.5 V to 5.5 V |
| 5 | Thermal pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-4(1x1) |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage | VIN | 1.5 | 5.5 | V | 6 | ||
| VOUT accuracy | VOUT | -2 | 2 | % | IOUT = 1 mA, TJ = 25 °C | 6 | |
| VOUT accuracy | VOUT | -3 | 3 | % | IOUT = 1 mA, -40 °C < TJ < 125 °C | 6 | |
| Static line regulation | ΔVOUT | 0.2 | %/V | -40 °C < TJ < 125 °C | 6 | ||
| Static load regulation | ΔVOUT | 0.01 | %/mA | -40 °C < TJ < 125 °C | 6 | ||
| Dropout voltage | VDROP | 200 | 350 | mV | IOUT = 200 mA, VOUT = 2.8 V, -40 °C < TJ < 125 °C | 6 | |
| Quiescent current | IQ | 20 | 40 | µA | IOUT = 0 mA | 6 | |
| Standby current | IStandby | 0.03 | 1 | µA | VIN input current in OFF MODE: VEN = GND | 6 | |
| Short circuit current | ISC | 250 | 350 | mA | RL = 0 | 6 | |
| Enable input logic low | VEN | 0.4 | V | VIN = 1.5 V to 5.5 V, -40 °C < TJ < 125 °C | 6 | ||
| Enable input logic high | VEN | 1 | V | VIN = 1.5 V to 5.5 V, -40 °C < TJ < 125 °C | 6 | ||
| Output capacitor capacitance | COUT | 0.47 | 22 | µF | see Figure 18. Stability area vs. (COUT, ESR) | 7 | |
| Input voltage absolute maximum | VIN | -0.3 | 7 | V | 5 | ||
| Output voltage absolute maximum | VOUT | -0.3 | V | max = VIN + 0.3 V | 5 | ||
| Enable input voltage absolute maximum | VEN | -0.3 | 7 | V | 5 | ||
| Storage temperature range | TSTG | -40 | 150 | °C | 5 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | 5 | ||
| Static line regulation | ΔVOUT | 0.02 | %/V | VOUT(NOM) + 1 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA | 6 | ||
| Static load regulation | ΔVOUT | 10 | mV | IOUT = 0 mA to 200 mA | 6 | ||
| Dropout voltage | VDROP | 35 | mV | IOUT = 30 mA, VOUT = 2.8 V | 6 | ||
| Output noise voltage | eN | 45 | µVRMS/VOUT | 10 Hz to 100 kHz, IOUT = 10 mA | 6 | ||
| Supply voltage rejection | SVR | 80 | dB | VIN = VOUT(NOM)+1 V ± VRIPPLE, VRIPPLE = 0.2 V, Freq. = 1 kHz, IOUT = 30 mA | 6 | ||
| Supply voltage rejection | SVR | 55 | dB | VIN = VOUT(NOM)+1 V ± VRIPPLE, VRIPPLE = 0.2 V, Freq. = 100 kHz, IOUT = 30 mA | 6 | ||
| Quiescent current | IQ | 100 | µA | IOUT = 200 mA | 6 | ||
| Output voltage discharge MOSFET on-resistance | RON | 100 | Ω | Output voltage discharge MOSFET (LD39020DT only) | 6 | ||
| Enable pin input current | IEN | 100 | nA | VEN = VIN | 6 | ||
| Turn on time | TON | 100 | µs | 6 | |||
| Thermal shutdown | TSHDN | 160 | °C | 7 | |||
| Thermal shutdown hysteresis | 20 | °C | 7 | ||||
| Thermal resistance junction-ambient, DFN4 1x1 | RthJA | 250 | °C/W | DFN4 1x1 package | 5 |
CAD (KiCad official)
- Symbol:
LD39020DTPU25R - Footprint:
Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm - 3D model: DFN-4(1x1) (KiCad packages3D, STEP)
- 3D model files:
ld39020dtpu25r-etched.step/ld39020dtpu25r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld39020dtpu25r.step/ld39020dtpu25r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (30 pp, sha256
e4097fa7d6a209f5, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).