Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LD39020DTPU25R

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · DFN-4(1x1)

LD39020DTPU25R from STMicroelectronics, in a DFN-4(1x1). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output voltage capable of supplying up to 200 mA of output current
2 GND power_in Common ground and current return path
3 EN input Enable logic input; low logic level (≤ 0.4 V) disables device, high logic level (≥ 1 V) enables operation
4 IN power_in Input power supply voltage with operating range from 1.5 V to 5.5 V
5 Thermal pad passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DFN-4(1x1)
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating input voltage VIN 1.5 5.5 V 6
VOUT accuracy VOUT -2 2 % IOUT = 1 mA, TJ = 25 °C 6
VOUT accuracy VOUT -3 3 % IOUT = 1 mA, -40 °C < TJ < 125 °C 6
Static line regulation ΔVOUT 0.2 %/V -40 °C < TJ < 125 °C 6
Static load regulation ΔVOUT 0.01 %/mA -40 °C < TJ < 125 °C 6
Dropout voltage VDROP 200 350 mV IOUT = 200 mA, VOUT = 2.8 V, -40 °C < TJ < 125 °C 6
Quiescent current IQ 20 40 µA IOUT = 0 mA 6
Standby current IStandby 0.03 1 µA VIN input current in OFF MODE: VEN = GND 6
Short circuit current ISC 250 350 mA RL = 0 6
Enable input logic low VEN 0.4 V VIN = 1.5 V to 5.5 V, -40 °C < TJ < 125 °C 6
Enable input logic high VEN 1 V VIN = 1.5 V to 5.5 V, -40 °C < TJ < 125 °C 6
Output capacitor capacitance COUT 0.47 22 µF see Figure 18. Stability area vs. (COUT, ESR) 7
Input voltage absolute maximum VIN -0.3 7 V 5
Output voltage absolute maximum VOUT -0.3 V max = VIN + 0.3 V 5
Enable input voltage absolute maximum VEN -0.3 7 V 5
Storage temperature range TSTG -40 150 °C 5
Operating junction temperature range TOP -40 125 °C 5
Static line regulation ΔVOUT 0.02 %/V VOUT(NOM) + 1 V ≤ VIN ≤ 5.5 V, IOUT = 10 mA 6
Static load regulation ΔVOUT 10 mV IOUT = 0 mA to 200 mA 6
Dropout voltage VDROP 35 mV IOUT = 30 mA, VOUT = 2.8 V 6
Output noise voltage eN 45 µVRMS/VOUT 10 Hz to 100 kHz, IOUT = 10 mA 6
Supply voltage rejection SVR 80 dB VIN = VOUT(NOM)+1 V ± VRIPPLE, VRIPPLE = 0.2 V, Freq. = 1 kHz, IOUT = 30 mA 6
Supply voltage rejection SVR 55 dB VIN = VOUT(NOM)+1 V ± VRIPPLE, VRIPPLE = 0.2 V, Freq. = 100 kHz, IOUT = 30 mA 6
Quiescent current IQ 100 µA IOUT = 200 mA 6
Output voltage discharge MOSFET on-resistance RON 100 Ω Output voltage discharge MOSFET (LD39020DT only) 6
Enable pin input current IEN 100 nA VEN = VIN 6
Turn on time TON 100 µs 6
Thermal shutdown TSHDN 160 °C 7
Thermal shutdown hysteresis 20 °C 7
Thermal resistance junction-ambient, DFN4 1x1 RthJA 250 °C/W DFN4 1x1 package 5

CAD (KiCad official)

  • Symbol: LD39020DTPU25R
  • Footprint: Package_DFN_QFN:UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm
  • 3D model: DFN-4(1x1) (KiCad packages3D, STEP)
  • 3D model files: ld39020dtpu25r-etched.step / ld39020dtpu25r-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld39020dtpu25r.step / ld39020dtpu25r.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (30 pp, sha256 e4097fa7d6a209f5, retrieved 2026-10-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF