main
History Download
Ray Publish 0.1.0 4fa5bb3

LD2980CM18TR

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LD2980CM18TR from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Input port; operating input voltage is 2.5 to 16 V and the DC input voltage absolute maximum range is -0.3 to 16 V.
2 GND power_in Ground pin.
3 INHIBIT input Control switch ON/OFF; inhibit is not internally pulled up and cannot be left floating, and the device is disabled when connected to GND or to a positive voltage less than 0.18 V.
4 NC unconnected Not connected.
5 VOUT power_out Output port.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating input voltage VOP 2.5 16 V 9
Output voltage VO 1.782 1.8 1.818 V IO = 1 mA 9
Output voltage VO 1.773 1.827 V IO = 1 to 50 mA 9
Output voltage VO 1.737 1.863 V IO = 1 to 50 mA, TJ= -40 to 125°C 9
Line regulation 0.003 0.014 %/V VO(NOM) + 1 < VIN < 16 V, IO = 1 mA 9
Line regulation 0.032 %/V TJ= -40 to 125°C 9
Quiescent current ON mode IQ 80 100 µA IO = 0 9
Quiescent current ON mode IQ 150 µA IO = 0, TJ= -40 to 125°C 9
Quiescent current ON mode IQ 100 150 µA IO = 1 mA 9
Quiescent current ON mode IQ 200 µA IO = 1 mA, TJ= -40 to 125°C 9
Quiescent current ON mode IQ 175 250 µA IO = 10 mA 9
Quiescent current ON mode IQ 450 µA IO = 10 mA, TJ= -40 to 125°C 9
Quiescent current ON mode IQ 500 700 µA IO = 50 mA 9
Quiescent current ON mode IQ 1200 µA IO = 50 mA, TJ= -40 to 125°C 9
Dropout voltage VDROP 1 3 mV IO = 0 9
Dropout voltage VDROP 5 mV IO = 0, TJ= -40 to 125°C 9
Dropout voltage VDROP 7 10 mV IO = 1mA 9
Dropout voltage VDROP 15 mV IO = 1mA, TJ= -40 to 125°C 9
Dropout voltage VDROP 40 60 mV IO = 10mA 9
Dropout voltage VDROP 90 mV IO = 10mA, TJ= -40 to 125°C 9
Dropout voltage VDROP 120 150 mV IO = 50mA 9
Dropout voltage VDROP 225 mV IO = 50mA, TJ= -40 to 125°C 9
Input voltage VI -0.3 16 V DC input voltage 5
INHIBIT input voltage VINH -0.3 16 V 5
Storage temperature range TSTG -55 150 °C 5
Operating junction temperature range TOP -40 125 °C 5
Inhibit input logic low VINH 0.18 V LOW = Output OFF, TJ= -40 to 125°C 10
Inhibit input logic high VINL 1.6 V HIGH = Output ON, TJ= -40 to 125°C 10
Inhibit input current IINH -1 0 µF VINH = 0V, TJ= -40 to 125°C 10
Inhibit input current IINH 5 15 µF VINH = 5V, TJ= -40 to 125°C 10
Quiescent current OFF mode IQ 0 µA VINH < 0.18 V 9
Short circuit current ISC 150 mA RL = 0 9
Supply voltage rejection SVR 63 dB CO = 10µF, f = 1kHz 9
Output noise voltage eN 160 µVRMS BW = 300 Hz to 50 kHz, CO = 10µF 10
Thermal shutdown TSHDN 170 °C 10
Thermal resistance junction-case RthJC 81 °C/W 4
Thermal resistance junction-ambient RthJA 255 °C/W 4

CAD (KiCad official)

  • Symbol: LD2980CM18TR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ld2980cm18tr-etched.step / ld2980cm18tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld2980cm18tr.step / ld2980cm18tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (22 pp, sha256 3856cbe69f350618, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF