3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLD2980CM18TR
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LD2980CM18TR from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input port; operating input voltage is 2.5 to 16 V and the DC input voltage absolute maximum range is -0.3 to 16 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | INHIBIT | input | Control switch ON/OFF; inhibit is not internally pulled up and cannot be left floating, and the device is disabled when connected to GND or to a positive voltage less than 0.18 V. |
| 4 | NC | unconnected | Not connected. |
| 5 | VOUT | power_out | Output port. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating input voltage | VOP | 2.5 | 16 | V | 9 | ||
| Output voltage | VO | 1.782 | 1.8 | 1.818 | V | IO = 1 mA | 9 |
| Output voltage | VO | 1.773 | 1.827 | V | IO = 1 to 50 mA | 9 | |
| Output voltage | VO | 1.737 | 1.863 | V | IO = 1 to 50 mA, TJ= -40 to 125°C | 9 | |
| Line regulation | 0.003 | 0.014 | %/V | VO(NOM) + 1 < VIN < 16 V, IO = 1 mA | 9 | ||
| Line regulation | 0.032 | %/V | TJ= -40 to 125°C | 9 | |||
| Quiescent current ON mode | IQ | 80 | 100 | µA | IO = 0 | 9 | |
| Quiescent current ON mode | IQ | 150 | µA | IO = 0, TJ= -40 to 125°C | 9 | ||
| Quiescent current ON mode | IQ | 100 | 150 | µA | IO = 1 mA | 9 | |
| Quiescent current ON mode | IQ | 200 | µA | IO = 1 mA, TJ= -40 to 125°C | 9 | ||
| Quiescent current ON mode | IQ | 175 | 250 | µA | IO = 10 mA | 9 | |
| Quiescent current ON mode | IQ | 450 | µA | IO = 10 mA, TJ= -40 to 125°C | 9 | ||
| Quiescent current ON mode | IQ | 500 | 700 | µA | IO = 50 mA | 9 | |
| Quiescent current ON mode | IQ | 1200 | µA | IO = 50 mA, TJ= -40 to 125°C | 9 | ||
| Dropout voltage | VDROP | 1 | 3 | mV | IO = 0 | 9 | |
| Dropout voltage | VDROP | 5 | mV | IO = 0, TJ= -40 to 125°C | 9 | ||
| Dropout voltage | VDROP | 7 | 10 | mV | IO = 1mA | 9 | |
| Dropout voltage | VDROP | 15 | mV | IO = 1mA, TJ= -40 to 125°C | 9 | ||
| Dropout voltage | VDROP | 40 | 60 | mV | IO = 10mA | 9 | |
| Dropout voltage | VDROP | 90 | mV | IO = 10mA, TJ= -40 to 125°C | 9 | ||
| Dropout voltage | VDROP | 120 | 150 | mV | IO = 50mA | 9 | |
| Dropout voltage | VDROP | 225 | mV | IO = 50mA, TJ= -40 to 125°C | 9 | ||
| Input voltage | VI | -0.3 | 16 | V | DC input voltage | 5 | |
| INHIBIT input voltage | VINH | -0.3 | 16 | V | 5 | ||
| Storage temperature range | TSTG | -55 | 150 | °C | 5 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | 5 | ||
| Inhibit input logic low | VINH | 0.18 | V | LOW = Output OFF, TJ= -40 to 125°C | 10 | ||
| Inhibit input logic high | VINL | 1.6 | V | HIGH = Output ON, TJ= -40 to 125°C | 10 | ||
| Inhibit input current | IINH | -1 | 0 | µF | VINH = 0V, TJ= -40 to 125°C | 10 | |
| Inhibit input current | IINH | 5 | 15 | µF | VINH = 5V, TJ= -40 to 125°C | 10 | |
| Quiescent current OFF mode | IQ | 0 | µA | VINH < 0.18 V | 9 | ||
| Short circuit current | ISC | 150 | mA | RL = 0 | 9 | ||
| Supply voltage rejection | SVR | 63 | dB | CO = 10µF, f = 1kHz | 9 | ||
| Output noise voltage | eN | 160 | µVRMS | BW = 300 Hz to 50 kHz, CO = 10µF | 10 | ||
| Thermal shutdown | TSHDN | 170 | °C | 10 | |||
| Thermal resistance junction-case | RthJC | 81 | °C/W | 4 | |||
| Thermal resistance junction-ambient | RthJA | 255 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
LD2980CM18TR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ld2980cm18tr-etched.step/ld2980cm18tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld2980cm18tr.step/ld2980cm18tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (22 pp, sha256
3856cbe69f350618, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).