main
Ray
Initial commit: component/ld29300p2mtr
4d8aaa9
LD29300P2MTR
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-6
LD29300P2MTR from STMicroelectronics, in a TO-263-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Adjust/feedback pin; internal reference is 1.23 V (±1% at 25°C) measured between OUTPUT and GND with ADJ tied to VOUT, and draws a maximum adjust-pin current of 1 µA, used with an external resistor divider to set VO = VREF(1+R1/R2). |
| 2 | OUTPUT | power_out | Regulated output voltage pin, guaranteed output current up to 3 A with load regulation of 0.2% typ (1.0% max) over IO = 10 mA to 3 A. |
| 3 | GND | power_in | Ground reference pin; quiescent (ground) current is 20-50 mA typ/max at IO = 1.5 A and 45-100 mA at IO = 3 A (TJ = -40 to 125°C). |
| 4 | INPUT | power_in | DC input voltage pin; absolute maximum DC input voltage is 30 V (device is automatically forced into shutdown above 14 V), with a minimum operating input voltage of 2.5 V for IO up to 3 A. |
| 5 | INH | input | Logic-controlled shutdown (inhibit) input: logic-low ≤0.8 V puts the device in OFF mode, logic-high ≥2 V is ON mode, drawing 5-10 µA at VINH = 13 V. |
| 6 | GND | power_in | Metal tab, internally connected to the GND pin, provides the main heat-dissipation path (RthJC = 3 °C/W) and must be grounded. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-263-6 |
| Category | Power Management (PMIC) |
| Pins | 7 |
CAD (KiCad official)
- Symbol:
LD29300P2MTR - Footprint:
Package_TO_SOT_SMD:TO-263-6 - 3D model: TO-263-6 (KiCad packages3D, STEP)
- 3D model files:
ld29300p2mtr-etched.step/ld29300p2mtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld29300p2mtr.step/ld29300p2mtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (17 pp, sha256
b71b7a08bfb55b04, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-5(text+vision), consensusclaude-opus-4-8(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LD29300P2MTR
**STMicroelectronics** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-6
LD29300P2MTR from STMicroelectronics, in a TO-263-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | Adjust/feedback pin; internal reference is 1.23 V (±1% at 25°C) measured between OUTPUT and GND with ADJ tied to VOUT, and draws a maximum adjust-pin current of 1 µA, used with an external resistor divider to set VO = VREF(1+R1/R2). |
| 2 | OUTPUT | power_out | Regulated output voltage pin, guaranteed output current up to 3 A with load regulation of 0.2% typ (1.0% max) over IO = 10 mA to 3 A. |
| 3 | GND | power_in | Ground reference pin; quiescent (ground) current is 20-50 mA typ/max at IO = 1.5 A and 45-100 mA at IO = 3 A (TJ = -40 to 125°C). |
| 4 | INPUT | power_in | DC input voltage pin; absolute maximum DC input voltage is 30 V (device is automatically forced into shutdown above 14 V), with a minimum operating input voltage of 2.5 V for IO up to 3 A. |
| 5 | INH | input | Logic-controlled shutdown (inhibit) input: logic-low ≤0.8 V puts the device in OFF mode, logic-high ≥2 V is ON mode, drawing 5-10 µA at VINH = 13 V. |
| 6 | GND | power_in | Metal tab, internally connected to the GND pin, provides the main heat-dissipation path (RthJC = 3 °C/W) and must be grounded. |
| 7 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-263-6 |
| Category | Power Management (PMIC) |
| Pins | 7 |
## CAD (KiCad official)
- Symbol: `LD29300P2MTR`
- Footprint: `Package_TO_SOT_SMD:TO-263-6`
- 3D model: TO-263-6 (KiCad packages3D, STEP)
- 3D model files: `ld29300p2mtr-etched.step` / `ld29300p2mtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ld29300p2mtr.step` / `ld29300p2mtr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885838499622912) (17 pp, sha256 `b71b7a08bfb55b04`, retrieved 2026-09-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-sonnet-5` (text+vision), consensus `claude-opus-4-8` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ld29300p2mtr-datasheet.pdf)