main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ld29300p2mtr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain S… · Ray
viewers ld29300p2mtr: viewers · Ray
ld29300p2mtr-etched.fit.json ld29300p2mtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ld29300p2mtr-etched.glb ld29300p2mtr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain S… · Ray
ld29300p2mtr-etched.step ld29300p2mtr: etch along the lead row, tab up; full MPN text (service-occt 1.9.3) (service-occt 1.6.0, from the plain S… · Ray
ld29300p2mtr-hero.glb Publish 0.1.1 · Ray
ld29300p2mtr-hero.overlay.json Publish 0.1.1 · Ray
ld29300p2mtr.glb Publish 0.1.0 · Ray
ld29300p2mtr.kicad_mod Publish 0.1.0 · Ray
ld29300p2mtr.kicad_sym Publish 0.1.0 · Ray
ld29300p2mtr.lbr Publish 0.1.0 · Ray
ld29300p2mtr.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md Initial commit: component/ld29300p2mtr · Ray

LD29300P2MTR

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-6

LD29300P2MTR from STMicroelectronics, in a TO-263-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ADJ input Adjust/feedback pin; internal reference is 1.23 V (±1% at 25°C) measured between OUTPUT and GND with ADJ tied to VOUT, and draws a maximum adjust-pin current of 1 µA, used with an external resistor divider to set VO = VREF(1+R1/R2).
2 OUTPUT power_out Regulated output voltage pin, guaranteed output current up to 3 A with load regulation of 0.2% typ (1.0% max) over IO = 10 mA to 3 A.
3 GND power_in Ground reference pin; quiescent (ground) current is 20-50 mA typ/max at IO = 1.5 A and 45-100 mA at IO = 3 A (TJ = -40 to 125°C).
4 INPUT power_in DC input voltage pin; absolute maximum DC input voltage is 30 V (device is automatically forced into shutdown above 14 V), with a minimum operating input voltage of 2.5 V for IO up to 3 A.
5 INH input Logic-controlled shutdown (inhibit) input: logic-low ≤0.8 V puts the device in OFF mode, logic-high ≥2 V is ON mode, drawing 5-10 µA at VINH = 13 V.
6 GND power_in Metal tab, internally connected to the GND pin, provides the main heat-dissipation path (RthJC = 3 °C/W) and must be grounded.
7 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TO-263-6
Category Power Management (PMIC)
Pins 7

CAD (KiCad official)

  • Symbol: LD29300P2MTR
  • Footprint: Package_TO_SOT_SMD:TO-263-6
  • 3D model: TO-263-6 (KiCad packages3D, STEP)
  • 3D model files: ld29300p2mtr-etched.step / ld29300p2mtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ld29300p2mtr.step / ld29300p2mtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (17 pp, sha256 b71b7a08bfb55b04, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-sonnet-5 (text+vision), consensus claude-opus-4-8 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF