main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lan91c111-nu: viewers · Ray
lan91c111-nu-etched.glb Publish 0.1.0 · Ray
lan91c111-nu-etched.step lan91c111-nu: factory component page (tier=mfr) · Ray
lan91c111-nu-hero.glb lan91c111-nu: hero GLB from the etched model (keeps the MPN mark) · Ray
lan91c111-nu-hero.overlay.json Publish 0.1.0 · Ray
lan91c111-nu.glb Publish 0.1.0 · Ray
lan91c111-nu.kicad_mod Publish 0.1.0 · Ray
lan91c111-nu.kicad_sym Publish 0.1.0 · Ray
lan91c111-nu.lbr Publish 0.1.0 · Ray
lan91c111-nu.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 128 pins · Ray

LAN91C111-NU

Microchip Tech · Ethernet Transceivers · TQFP-128(14x14)

LAN91C111-NU from Microchip Tech, in a TQFP-128(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in +3.3V power supply pin.
2 nCSOUT output Chip select output for external registers, active on accesses to the lower eight addresses when bank 7 is selected.
3 IOS0 input External switch input that selects between predefined EEPROM configurations, with an internal pullup.
4 IOS1 input External switch input that selects between predefined EEPROM configurations, with an internal pullup.
5 IOS2 input External switch input that selects between predefined EEPROM configurations, with an internal pullup.
6 ENEEP input Enables serial EEPROM accesses when high or open and must be grounded if no EEPROM is connected.
7 EEDO output Serial EEPROM data output connected to the DI input of the EEPROM.
8 EEDI input Serial EEPROM data input connected to the DO output of the EEPROM, with an internal pulldown.
9 EESK output EEPROM clock output used to shift data in and out of the serial EEPROM.
10 EECS output Serial EEPROM chip select output used for selection and command framing.
11 AVDD power_in +3.3V analog power supply pin.
12 RBIAS passive An external resistor between this pin and GND sets the output current for the TP transmit outputs.
13 AGND power_in Analog ground pin.
14 TPO+ output Twisted pair transmit output, positive.
15 TPO- output Twisted pair transmit output, negative.
16 AVDD power_in +3.3V analog power supply pin.
17 TPI+ bidirectional Twisted pair receive input, positive.
18 TPI- bidirectional Twisted pair receive input, negative.
19 AGND power_in Analog ground pin.
20 nLNK input General-purpose input conveying link status (EPHSR bit 14), with an internal pullup.
21 LBK output Output that is active when the LOOP bit (TCR bit 1) is set.
22 nLEDA output PHY LED output, open drain with 24mA sink.
23 nLEDB output PHY LED output, open drain with 24mA sink.
24 GND power_in Ground pin.
25 MDI input MII management data input, with an internal pulldown.
26 MDO output MII management data output.
27 MCLK output MII management clock output.
28 nCNTRL output General purpose control output pin (O12 buffer).
29 INTR0 output Active high interrupt output used to interrupt the host on a status event.
30 RESET input When asserted high for at least 100ns, performs an internal MAC and PHY reset.
31 nRD input Read strobe input used in asynchronous bus interfaces.
32 nWR input Write strobe input used in asynchronous bus interfaces.
33 VDD power_in +3.3V power supply pin.
34 nDATACS input Data path chip select; when low the data path can be accessed for 32-bit bursts regardless of AEN and A1-A15.
35 nCYCLE input Active low signal controlling EISA burst mode synchronous bus cycles.
36 W/nR input Defines the direction of synchronous cycles: write when high, read when low.
37 nADS input Rising edge latches A1-A15 and AEN for systems requiring address latching.
38 ARDY output Open drain output used to extend asynchronous bus accesses (OD16, 16mA sink).
39 GND power_in Ground pin.
40 nVLBUS input When low, the synchronous bus interface is configured for VL Bus accesses; it has an internal pullup.
41 AEN input Address qualifier; address decoding is enabled only when AEN is low.
42 LCLK input Local bus clock for synchronous buses, with a maximum frequency of 50 MHz.
43 nSRDY output Synchronous ready output used to extend accesses when nVLBUS=0, synchronous to LCLK.
44 VDD power_in +3.3V power supply pin.
45 nLDEV output Active low when AEN is low and A4-A15 decode to the programmed base address (O16 buffer).
46 nRDYRTN input Input used to complete synchronous read cycles, sampled on falling LCLK edges in EISA burst mode.
47 X25OUT output 25 MHz clock output to an external PHY.
48 D31 bidirectional Bit 31 of the 32-bit data bus, with weak internal pullup; 12mA source and 24mA sink.
49 D30 bidirectional Bit 30 of the 32-bit data bus, with weak internal pullup.
50 D29 bidirectional Bit 29 of the 32-bit data bus, with weak internal pullup.
51 D28 bidirectional Bit 28 of the 32-bit data bus, with weak internal pullup.
52 GND power_in Ground pin.
53 D27 bidirectional Bit 27 of the 32-bit data bus, with weak internal pullup.
54 D26 bidirectional Bit 26 of the 32-bit data bus, with weak internal pullup.
55 D25 bidirectional Bit 25 of the 32-bit data bus, with weak internal pullup.
56 D24 bidirectional Bit 24 of the 32-bit data bus, with weak internal pullup.
57 GND power_in Ground pin.
58 D23 bidirectional Bit 23 of the 32-bit data bus, with weak internal pullup.
59 D22 bidirectional Bit 22 of the 32-bit data bus, with weak internal pullup.
60 D21 bidirectional Bit 21 of the 32-bit data bus, with weak internal pullup.
61 D20 bidirectional Bit 20 of the 32-bit data bus, with weak internal pullup.
62 VDD power_in +3.3V power supply pin.
63 D19 bidirectional Bit 19 of the 32-bit data bus, with weak internal pullup.
64 D18 bidirectional Bit 18 of the 32-bit data bus, with weak internal pullup.
65 D17 bidirectional Bit 17 of the 32-bit data bus, with weak internal pullup.
66 D16 bidirectional Bit 16 of the 32-bit data bus, with weak internal pullup.
67 GND power_in Ground pin.
68 D15 bidirectional Bit 15 of the 32-bit data bus, with weak internal pullup; only D0-D15 are used in 16-bit systems.
69 D14 bidirectional Bit 14 of the 32-bit data bus, with weak internal pullup.
70 D13 bidirectional Bit 13 of the 32-bit data bus, with weak internal pullup.
71 D12 bidirectional Bit 12 of the 32-bit data bus, with weak internal pullup.
72 GND power_in Ground pin.
73 D11 bidirectional Bit 11 of the 32-bit data bus, with weak internal pullup.
74 D10 bidirectional Bit 10 of the 32-bit data bus, with weak internal pullup.
75 D9 bidirectional Bit 9 of the 32-bit data bus, with weak internal pullup.
76 D8 bidirectional Bit 8 of the 32-bit data bus, with weak internal pullup.
77 VDD power_in +3.3V power supply pin.
78 A1 input Address input used for internal register selection (5V tolerant).
79 A2 input Address input used for internal register selection (5V tolerant).
80 A3 input Address input used for internal register selection (5V tolerant).
81 A4 input Address input decoded to determine access to the registers (5V tolerant).
82 A5 input Address input decoded to determine access to the registers (5V tolerant).
83 A6 input Address input decoded to determine access to the registers (5V tolerant).
84 A7 input Address input decoded to determine access to the registers (5V tolerant).
85 A8 input Address input decoded to determine access to the registers (5V tolerant).
86 A9 input Address input decoded to determine access to the registers (5V tolerant).
87 A10 input Address input decoded to determine access to the registers (5V tolerant).
88 A11 input Address input decoded to determine access to the registers (5V tolerant).
89 A12 input Address input decoded to determine access to the registers (5V tolerant).
90 A13 input Address input decoded to determine access to the registers (5V tolerant).
91 A14 input Address input decoded to determine access to the registers (5V tolerant).
92 A15 input Address input decoded to determine access to the registers (5V tolerant).
93 GND power_in Ground pin.
94 nBE0 input Byte enable input that determines access width and the register(s) accessed; ignored when nDATACS is low.
95 nBE1 input Byte enable input that determines access width and the register(s) accessed; ignored when nDATACS is low.
96 nBE2 input Byte enable input that determines access width and the register(s) accessed; ignored when nDATACS is low.
97 nBE3 input Byte enable input that determines access width and the register(s) accessed; ignored when nDATACS is low.
98 VDD power_in +3.3V power supply pin.
99 D7 bidirectional Bit 7 of the 32-bit data bus, with weak internal pullup.
100 D6 bidirectional Bit 6 of the 32-bit data bus, with weak internal pullup.
101 D5 bidirectional Bit 5 of the 32-bit data bus, with weak internal pullup.
102 D4 bidirectional Bit 4 of the 32-bit data bus, with weak internal pullup.
103 GND power_in Ground pin.
104 D3 bidirectional Bit 3 of the 32-bit data bus, with weak internal pullup.
105 D2 bidirectional Bit 2 of the 32-bit data bus, with weak internal pullup.
106 D1 bidirectional Bit 1 of the 32-bit data bus, with weak internal pullup.
107 D0 bidirectional Bit 0 of the 32-bit data bus, with weak internal pullup.
108 GND power_in Ground pin.
109 TX25 input Transmit clock input from MII at nibble rate (25MHz for 100Mbps, 2.5MHz for 10Mbps), with an internal pullup.
110 VDD power_in +3.3V power supply pin.
111 TXEN100 output Output to MII PHY that envelopes 100 Mbps transmission (O12 buffer).
112 COL100 input Collision detect input from MII PHY, with an internal pulldown.
113 TXD3 output Transmit data nibble output to MII PHY (O12 buffer).
114 TXD2 output Transmit data nibble output to MII PHY (O12 buffer).
115 TXD1 output Transmit data nibble output to MII PHY (O12 buffer).
116 TXD0 output Transmit data nibble output to MII PHY (O12 buffer).
117 GND power_in Ground pin.
118 RX25 input Receive clock input from MII PHY at nibble rate (25MHz for 100Mbps, 2.5MHz for 10Mbps), with an internal pullup.
119 CRS100 input Carrier sense input from MII PHY used for deferral and backoff, with an internal pulldown.
120 VDD power_in +3.3V power supply pin.
121 RXD3 input Received data nibble input from MII PHY, with an internal pullup.
122 RXD2 input Received data nibble input from MII PHY, with an internal pullup.
123 RXD1 input Received data nibble input from MII PHY, with an internal pullup.
124 RXD0 input Received data nibble input from MII PHY, with an internal pullup.
125 RX_DV input Receive data valid input from MII PHY used for receive data framing, with an internal pulldown.
126 RX_ER input Receive error input from PHY that causes the received packet to be discarded, with an internal pulldown.
127 XTAL1 input Connected to a 25 MHz crystal; if a TTL clock is supplied instead, it is connected here with XTAL2 left open.
128 XTAL2 output Output of the internal crystal amplifier, connected to a 25 MHz crystal across XTAL1.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-128(14x14)
Category Communication Interface Chip
Pins 128

CAD (KiCad official)

  • Symbol: LAN91C111-NU
  • Footprint: Package_QFP:TQFP-128_14x14mm_P0.4mm
  • 3D model: TQFP-128(14x14) (KiCad packages3D, STEP)
  • 3D model files: lan91c111-nu-etched.step / lan91c111-nu-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lan91c111-nu.step / lan91c111-nu.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (125 pp, sha256 fcbbe864a0f58951, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF