main
Ray lan8710a-ezk-tr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 6ab2cfe
{
  "schema_version": 1,
  "type": "component",
  "slug": "lan8710a-ezk-tr",
  "title": "LAN8710A-EZK-TR",
  "brief": "Microchip Tech Ethernet Transceivers, QFN-32-EP(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "lan8710a-ezk-tr"
  ],
  "component": {
    "mpn": "LAN8710A-EZK-TR",
    "manufacturer": "Microchip Tech",
    "package": "QFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Interface",
    "subcategory": "Ethernet Transceivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920577403207680",
    "parts": {
      "symbol": "lan8710a-ezk-tr.kicad_sym",
      "footprint": "lan8710a-ezk-tr.kicad_mod",
      "model_3d": "lan8710a-ezk-tr-etched.glb",
      "model_3d_plain": "lan8710a-ezk-tr.glb",
      "model_3d_step": "lan8710a-ezk-tr-etched.step",
      "model_3d_step_plain": "lan8710a-ezk-tr.step",
      "lbr": "lan8710a-ezk-tr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "VDD2A",
        "type": "power_in",
        "description": "+3.3V analog port power for Channel 2 and the internal 1.2V regulator. Decouple to VSS per reference schematic."
      },
      {
        "number": "2",
        "name": "LED2/nINTSEL",
        "type": "bidirectional",
        "description": "LED2 output (O12, active when 100 Mbps link speed). Doubles as the nINTSEL configuration strap latched at reset: floated/pulled to VDD2A selects nINT; pulled low to VSS selects TXER/TXD4 on pin 18."
      },
      {
        "number": "3",
        "name": "LED1/REGOFF",
        "type": "bidirectional",
        "description": "LED1 output (O12, driven active on valid link, blinks on activity). Doubles as REGOFF configuration strap: pulled high to VDD2A via external resistor disables the internal 1.2V regulator (external 1.2V must be supplied to VDDCR); floated/low = internal regulator enabled."
      },
      {
        "number": "4",
        "name": "XTAL2",
        "type": "output",
        "description": "25 MHz crystal oscillator output (OCLK). Leave unconnected when driving XTAL1/CLKIN with a single-ended clock oscillator."
      },
      {
        "number": "5",
        "name": "XTAL1/CLKIN",
        "type": "input",
        "description": "25 MHz crystal input (ICLK) or single-ended clock oscillator input. In RMII mode this pin is also the REF_CLK reference."
      },
      {
        "number": "6",
        "name": "VDDCR",
        "type": "power_in",
        "description": "+1.2V digital core power. Supplied by the on-chip regulator by default, or from an external 1.2V rail when REGOFF is asserted. Bypass with 1 µF and 470 pF in parallel to VSS."
      },
      {
        "number": "7",
        "name": "RXCLK/PHYAD1",
        "type": "bidirectional",
        "description": "MII receive clock output (VO8): 25 MHz for 100BASE-TX, 2.5 MHz for 10BASE-T. At reset acts as PHYAD1 configuration strap (VIS, internal PD) combining with PHYAD0/PHYAD2 to set the SMI address."
      },
      {
        "number": "8",
        "name": "RXD3/PHYAD2",
        "type": "bidirectional",
        "description": "MII receive data bit 3 (VO8). Unused in RMII mode. At reset acts as PHYAD2 configuration strap (VIS, PD) contributing to the SMI PHY address."
      },
      {
        "number": "9",
        "name": "RXD2/RMIISEL",
        "type": "bidirectional",
        "description": "MII receive data bit 2 (VO8). Unused in RMII mode. At reset acts as RMIISEL configuration strap (VIS, PD): low to VSS selects MII, high to VDDIO selects RMII."
      },
      {
        "number": "10",
        "name": "RXD1/MODE1",
        "type": "bidirectional",
        "description": "MII/RMII receive data bit 1 (VO8). Also acts as MODE1 configuration strap (VIS, PU) combining with MODE0/MODE2 to set the default PHY operating mode (auto-neg / speed / duplex)."
      },
      {
        "number": "11",
        "name": "RXD0/MODE0",
        "type": "bidirectional",
        "description": "MII/RMII receive data bit 0 (VO8). Also acts as MODE0 configuration strap (VIS, PU) combining with MODE1/MODE2 to set the default PHY operating mode."
      },
      {
        "number": "12",
        "name": "VDDIO",
        "type": "power_in",
        "description": "Variable I/O power supply, +1.6V to +3.6V. Sets the digital I/O voltage level for all VIS/VO8 buffers."
      },
      {
        "number": "13",
        "name": "RXER/RXD4/PHYAD0",
        "type": "bidirectional",
        "description": "MII receive error output (VO8, default) or MII RXD4 in 5B-symbol interface mode. At reset acts as PHYAD0 configuration strap (VIS, PD) contributing to the SMI PHY address. Optional in RMII mode."
      },
      {
        "number": "14",
        "name": "CRS",
        "type": "output",
        "description": "MII Carrier Sense output (VO8, internal PD). Asserted to indicate carrier detection in MII mode."
      },
      {
        "number": "15",
        "name": "COL/CRS_DV/MODE2",
        "type": "bidirectional",
        "description": "MII collision detect (COL, VO8) or RMII Carrier Sense / Receive Data Valid (CRS_DV). At reset acts as MODE2 configuration strap (VIS, PU) combining with MODE0/MODE1 to set the default PHY mode."
      },
      {
        "number": "16",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "Serial Management Interface (SMI/MDIO) data input/output (VIS/VOD8, open-drain). Requires external pull-up to VDDIO."
      },
      {
        "number": "17",
        "name": "MDC",
        "type": "input",
        "description": "Serial Management Interface (SMI) clock input (VIS). Driven by the MAC/host to clock MDIO transactions."
      },
      {
        "number": "18",
        "name": "nINT/TXER/TXD4",
        "type": "bidirectional",
        "description": "Active-low interrupt output (VO8) by default; can be reconfigured via the nINTSEL strap (pin 2) to serve as MII Transmit Error (TXER, VIS+PU) or Symbol Interface TXD4. Requires external pull-up to VDDIO when used as nINT."
      },
      {
        "number": "19",
        "name": "nRST",
        "type": "input",
        "description": "Active-low external system reset input (VIS, internal PU). Drives configuration-strap latch on rising edge."
      },
      {
        "number": "20",
        "name": "TXCLK",
        "type": "output",
        "description": "MII transmit clock output (VO8). 25 MHz for 100BASE-TX, 2.5 MHz for 10BASE-T. Not used in RMII mode."
      },
      {
        "number": "21",
        "name": "TXEN",
        "type": "input",
        "description": "MII/RMII transmit enable input (VIS, internal PD). Asserted by the MAC to indicate valid transmit data on TXD."
      },
      {
        "number": "22",
        "name": "TXD0",
        "type": "input",
        "description": "MII/RMII transmit data bit 0 (VIS). Driven by the MAC to send transmit data to the PHY."
      },
      {
        "number": "23",
        "name": "TXD1",
        "type": "input",
        "description": "MII/RMII transmit data bit 1 (VIS). Driven by the MAC to send transmit data to the PHY."
      },
      {
        "number": "24",
        "name": "TXD2",
        "type": "input",
        "description": "MII transmit data bit 2 (VIS). Used in MII mode only; must be tied to ground in RMII mode."
      },
      {
        "number": "25",
        "name": "TXD3",
        "type": "input",
        "description": "MII transmit data bit 3 (VIS). Used in MII mode only; must be tied to ground in RMII mode."
      },
      {
        "number": "26",
        "name": "RXDV",
        "type": "output",
        "description": "MII Receive Data Valid output (VO8). Asserted when recovered and decoded data is available on the RXD lines."
      },
      {
        "number": "27",
        "name": "VDD1A",
        "type": "power_in",
        "description": "+3.3V analog port power for Channel 1 (TXP/TXN/RXP/RXN reference)."
      },
      {
        "number": "28",
        "name": "TXN",
        "type": "bidirectional",
        "description": "Ethernet twisted-pair transmit/receive negative, channel 1 (AIO). Connects to the magnetics MDI interface with the 1:1 isolation transformer."
      },
      {
        "number": "29",
        "name": "TXP",
        "type": "bidirectional",
        "description": "Ethernet twisted-pair transmit/receive positive, channel 1 (AIO). Connects to the magnetics MDI interface with the 1:1 isolation transformer."
      },
      {
        "number": "30",
        "name": "RXN",
        "type": "bidirectional",
        "description": "Ethernet twisted-pair transmit/receive negative, channel 2 (AIO). Auto-MDIX may swap functionality with channel 1 (TXN)."
      },
      {
        "number": "31",
        "name": "RXP",
        "type": "bidirectional",
        "description": "Ethernet twisted-pair transmit/receive positive, channel 2 (AIO). Auto-MDIX may swap functionality with channel 1 (TXP)."
      },
      {
        "number": "32",
        "name": "RBIAS",
        "type": "passive",
        "description": "External 1% bias resistor connection. Requires a 12.1 kΩ (1%) resistor to VSS; nominal pin voltage 1.2V, dissipating ~1 mW."
      },
      {
        "number": "33",
        "name": "VSS",
        "type": "power_in",
        "description": "Exposed thermal pad on the bottom of the package. Must be connected to the PCB ground plane via a via array; serves as the device common ground."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588920577403207680",
        "pages": null,
        "sha256": "0f4b8670bcfc7e63",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lan8710a-ezk-tr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lan8710a-ezk-tr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          5,
          0.875
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d00453223d24f20610d3fbfd6d3416d0c52ceced57378e9c5ec627aae7bd2311",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Microchip Tech",
      "Package": "QFN-32-EP(5x5)",
      "Category": "Interface",
      "Pins": "33"
    }
  },
  "variants": [
    {
      "mpn": "LAN8710A-EZK-TR",
      "kind": "packaging"
    },
    {
      "mpn": "LAN8710A-EZK-TREZC",
      "kind": "packaging"
    },
    {
      "mpn": "LAN8710A-EZK-TREZC-TR",
      "kind": "packaging"
    },
    {
      "mpn": "LAN8710A-EZK-ABC",
      "kind": "unknown"
    },
    {
      "mpn": "LAN8710A-EZK-TREZC-ABC",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "lan8710a-ezk-tr"
  ],
  "discovery_pitch": "LAN8710A-EZK-TR (Microchip Tech) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lan8710a-ezk-tr.kicad_sym",
    "lan8710a-ezk-tr.kicad_mod",
    "lan8710a-ezk-tr.glb",
    "lan8710a-ezk-tr.step",
    "lan8710a-ezk-tr.lbr",
    "docs/hero.png",
    "docs/lan8710a-ezk-tr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T23:42:05.676Z"
}