main
History Download
Ray Publish 0.1.0 8bb939f

LAN7850-I

Microchip Tech · Ethernet ICs · QFN-56-EP(8x8)

LAN7850-I from Microchip Tech, in a QFN-56-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TR0P bidirectional Gigabit Ethernet transmit/receive positive channel 0 (analog bidirectional).
2 TR0N bidirectional Gigabit Ethernet transmit/receive negative channel 0 (analog bidirectional).
3 VDD25A power_in +2.5V analog power supply input for the Gigabit Ethernet PHY.
4 TR1P bidirectional Gigabit Ethernet transmit/receive positive channel 1 (analog bidirectional).
5 TR1N bidirectional Gigabit Ethernet transmit/receive negative channel 1 (analog bidirectional).
6 VDD25A power_in +2.5V analog power supply input for the Gigabit Ethernet PHY.
7 TR2P bidirectional Gigabit Ethernet transmit/receive positive channel 2 (analog bidirectional).
8 TR2N bidirectional Gigabit Ethernet transmit/receive negative channel 2 (analog bidirectional).
9 VDD25A power_in +2.5V analog power supply input for the Gigabit Ethernet PHY.
10 TR3P bidirectional Gigabit Ethernet transmit/receive positive channel 3 (analog bidirectional).
11 TR3N bidirectional Gigabit Ethernet transmit/receive negative channel 3 (analog bidirectional).
12 VDD25A power_in +2.5V analog power supply input for the Gigabit Ethernet PHY.
13 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
14 TDI input JTAG test data input (variable-voltage Schmitt-triggered input).
15 TDO output JTAG test data output (O12 buffer, 12 mA sink/source).
16 TCK/GPIO0 bidirectional JTAG test clock (maximum frequency is half of the system clock), or general purpose I/O 0 programmable as push-pull output, open-drain output or Schmitt-triggered input.
17 TMS input JTAG test mode select (variable-voltage Schmitt-triggered input).
18 VDD12_SW_OUT power_out +1.2V output of the integrated switching regulator.
19 VDD_SW_IN power_in +3.3V input voltage for the integrated switching regulator.
20 VDD12_SW_FB input Feedback pin for the integrated switching regulator; tie to VDD_SW_IN to disable the switcher.
21 EECS/GPIO1 bidirectional Chip select output to the external EEPROM (O12), or general purpose I/O 1.
22 EEDI/GPIO2 bidirectional EEPROM data in, driven by the EEDO output of the external EEPROM, or general purpose I/O 2.
23 EEDO/GPIO3 bidirectional EEPROM data out, drives the EEDI input of the external EEPROM (O12), or general purpose I/O 3.
24 EECLK/GPIO4 bidirectional EEPROM clock output to the external EEPROM (O12), or general purpose I/O 4.
25 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
26 VDD12CORE power_in +1.2V digital core power supply input.
27 VBUS_DET input Detects the state of the upstream bus power; for bus powered operation it must be tied to VDD33A.
28 SUSPEND_N/GPIO5 bidirectional Active-low output asserted in suspend states (O12), may place an external switcher in low power state, or general purpose I/O 5.
29 CONNECT/GPIO6 bidirectional Output (O12) asserted when the device is attempting to attach to the USB host (HSIC operation), or general purpose I/O 6.
30 HSIC_SEL input When tied to VDD the HSIC interface is enabled, otherwise the USB 2.0 interface is enabled; static signal that may not be changed at run time.
31 LED0/GPIO7 bidirectional Open-drain (OD12) indicator LED 0 for Ethernet link, activity, duplex and collision, or general purpose I/O 7.
32 PME_MODE/GPIO8 bidirectional PME mode selection input when PME mode of operation is in effect, or general purpose I/O 8.
33 VDD12A power_in +1.2V analog power supply input for the USB PLL/AFE.
34 VDD12HSIC power_in +1.2V HSIC power supply input.
35 STROBE bidirectional HSIC bidirectional data strobe signal as defined in the High-Speed Inter-Chip USB Electrical Specification.
36 USB_DP bidirectional Hi-Speed USB data plus.
37 USB_DM bidirectional Hi-Speed USB data minus.
38 DATA bidirectional HSIC bidirectional double data rate data signal synchronous to STROBE.
39 PME_N output Signals PME when the PME mode of operation is in effect (O8/OD8).
40 TEST input Active high test pin that selects JTAG test mode when asserted; connect to ground for proper functional operation.
41 RESET_N/PME_CLEAR input Active-low system reset (pull up to VDD if unused), or PME clear input when PME mode of operation is in effect.
42 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
43 USBRBIAS passive Sets HS transmit current level and on-chip termination impedance; connect to an external 12K 1.0% resistor to ground.
44 VDD33A power_in +3.3V analog power supply for the USB 2.0 AFE.
45 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
46 XI input External 25 MHz crystal input; may also be driven by a single-ended clock oscillator with XO left unconnected.
47 XO output External 25 MHz crystal output.
48 VDD12CORE power_in +1.2V digital core power supply input.
49 LED1/GPIO9 bidirectional Open-drain (OD12) indicator LED 1 for Ethernet link, activity, duplex and collision, or general purpose I/O 9.
50 LED2/GPIO10 bidirectional Open-drain (OD12) indicator LED 2 for Ethernet link, activity, duplex and collision, or general purpose I/O 10.
51 LED3/GPIO11 bidirectional Open-drain (OD12) indicator LED 3 for Ethernet link, activity, duplex and collision, or general purpose I/O 11.
52 VDD12A power_in +1.2V analog power supply input for the USB PLL/AFE.
53 VDD25_REG_OUT power_out +2.5V output from the integrated LDO, used to supply the Gigabit Ethernet PHY AFE.
54 VDD33_REG_IN power_in +3.3V power supply input to the integrated LDO.
55 REF_REXT passive External PHY reference resistor; connect to an external 2K 1.0% resistor to ground.
56 REF_FILT passive External PHY reference filter; connect to an external 1uF capacitor to ground.
57 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-56-EP(8x8)
Category Communication Interface Chip/UART/485/232
Pins 57

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDDVARIO, VDD_SW_IN, VDD33_REG_IN) -0.5 4.6 V 258
+3.3 V Analog Supply Voltage VDD33A -0.5 4.6 V 258
+2.5 V Analog Supply Voltage VDD25A -0.5 3.2 V 258
+1.2 V Analog Supply Voltage VDD12A -0.5 1.5 V 258
Digital Supply Voltage (VDD12CORE, VDD12HSIC) VDD12CORE -0.5 1.5 V 258
Positive voltage on input signal pins, with respect to ground 4.6 V 258
Negative voltage on input signal pins, with respect to ground -0.5 V 258
Storage Temperature -65 150 oC 258
HBM ESD Performance -2 2 kV 258
Supply Voltage (VDD33_REG_IN) VDD33_REG_IN 2.97 3.63 V 258
Supply Voltage (VDD_SW_IN) VDD_SW_IN 2.97 3.63 V 258
Supply Voltage (VDDVARIO) VDDVARIO 1.62 3.63 V 258
+3.3 V Analog Supply Voltage (VDD33A) VDD33A 2.97 3.63 V 258
+2.5 V Analog Supply Voltage (VDD25A) VDD25A 2.38 2.63 V 258
+1.2 V Analog Supply Voltage (VDD12A) VDD12A 1.1 1.26 V 258
Digital Supply Voltage (VDD12CORE, VDD12HSIC) VDD12CORE 1.1 1.26 V 258
Positive voltage on input signal pins, with respect to ground 3.3 V 258
Negative voltage on input signal pins, with respect to ground -0.3 V 258
Ambient Operating Temperature in Still Air (TA) TA -40 85 oC Industrial version (Note 16-2) 258
Thermal Resistance Junction to Ambient JA 26 oC/W 0 m/s air velocity, multi-layer 2S2P PCB 259
Thermal Resistance Junction to Top of Case JC 2.3 oC/W 0 m/s air velocity, multi-layer 2S2P PCB 259
Thermal Resistance Junction to Board JB 14 oC/W 0 m/s air velocity, multi-layer 2S2P PCB 259
Thermal Resistance Junction to Bottom of Case JT 0.2 oC/W 0 m/s air velocity, multi-layer 2S2P PCB 259
O8 Type Input Buffer Low Output Level VOL 0.4 V IOL = -8 mA 261
OD8 Type Input Buffer Low Output Level VOL 0.4 V IOL = -8 mA 261
O12 Type Input Buffer Low Output Level VOL 0.4 V IOL = -12 mA 261
OD12 Type Input Buffer Low Output Level VOL 0.4 V IOL = -12 mA 261
Input Leakage IIH -10 10 uA VIN = VSS or VDDVARIO 261
Input Capacitance CIN 2 pF 261
Frequency Tolerance @ 25oC Ftol -50 50 PPM @ 25oC (Note 16-6) 265
Frequency Stability Over Temp Ftemp -50 50 PPM (Note 16-6) 265
Total Allowable PPM Budget -50 50 PPM (Note 16-8) 265
Shunt Capacitance CO 6 pF 265
Load Capacitance CL 18 pF 265
Drive Level PW 250 uW 265
Equivalent Series Resistance R1 50 Ohm 265
TCK clock period ttckp 40 ns 263
TDI, TMS setup to TCK rising edge tsu 10 ns 263
TDI, TMS hold from TCK rising edge th 10 ns 263
TDO output valid from TCK falling edge tdov 16 ns 263
TDO output invalid from TCK falling edge tdoinvld 0 ns 263
EECLK Cycle time tckcyc 1110 1130 ns 264
EECLK High time tckh 550 570 ns 264
EECLK Low time tckl 550 570 ns 264
EECS high before rising edge of EECLK tcshckh 1070 ns 264
EEDI setup to rising edge of EECLK tdsckh 90 ns 264
EEDI hold after rising edge of EECLK tdhckh 0 ns 264
EECS low tcsl 1070 ns 264

CAD (KiCad official)

  • Symbol: LAN7850-I
  • Footprint: Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm
  • 3D model: QFN-56-EP(8x8) (KiCad packages3D, STEP)
  • 3D model files: lan7850-i-etched.step / lan7850-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lan7850-i.step / lan7850-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (273 pp, sha256 566c3fc8e69cf267, retrieved 2026-11-07, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF