Generated by kicad-footprint-generator · KiCad file format 20260206
LAN7850-I
Microchip Tech · Ethernet ICs · QFN-56-EP(8x8)
LAN7850-I from Microchip Tech, in a QFN-56-EP(8x8). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TR0P | bidirectional | Gigabit Ethernet transmit/receive positive channel 0 (analog bidirectional). |
| 2 | TR0N | bidirectional | Gigabit Ethernet transmit/receive negative channel 0 (analog bidirectional). |
| 3 | VDD25A | power_in | +2.5V analog power supply input for the Gigabit Ethernet PHY. |
| 4 | TR1P | bidirectional | Gigabit Ethernet transmit/receive positive channel 1 (analog bidirectional). |
| 5 | TR1N | bidirectional | Gigabit Ethernet transmit/receive negative channel 1 (analog bidirectional). |
| 6 | VDD25A | power_in | +2.5V analog power supply input for the Gigabit Ethernet PHY. |
| 7 | TR2P | bidirectional | Gigabit Ethernet transmit/receive positive channel 2 (analog bidirectional). |
| 8 | TR2N | bidirectional | Gigabit Ethernet transmit/receive negative channel 2 (analog bidirectional). |
| 9 | VDD25A | power_in | +2.5V analog power supply input for the Gigabit Ethernet PHY. |
| 10 | TR3P | bidirectional | Gigabit Ethernet transmit/receive positive channel 3 (analog bidirectional). |
| 11 | TR3N | bidirectional | Gigabit Ethernet transmit/receive negative channel 3 (analog bidirectional). |
| 12 | VDD25A | power_in | +2.5V analog power supply input for the Gigabit Ethernet PHY. |
| 13 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 14 | TDI | input | JTAG test data input (variable-voltage Schmitt-triggered input). |
| 15 | TDO | output | JTAG test data output (O12 buffer, 12 mA sink/source). |
| 16 | TCK/GPIO0 | bidirectional | JTAG test clock (maximum frequency is half of the system clock), or general purpose I/O 0 programmable as push-pull output, open-drain output or Schmitt-triggered input. |
| 17 | TMS | input | JTAG test mode select (variable-voltage Schmitt-triggered input). |
| 18 | VDD12_SW_OUT | power_out | +1.2V output of the integrated switching regulator. |
| 19 | VDD_SW_IN | power_in | +3.3V input voltage for the integrated switching regulator. |
| 20 | VDD12_SW_FB | input | Feedback pin for the integrated switching regulator; tie to VDD_SW_IN to disable the switcher. |
| 21 | EECS/GPIO1 | bidirectional | Chip select output to the external EEPROM (O12), or general purpose I/O 1. |
| 22 | EEDI/GPIO2 | bidirectional | EEPROM data in, driven by the EEDO output of the external EEPROM, or general purpose I/O 2. |
| 23 | EEDO/GPIO3 | bidirectional | EEPROM data out, drives the EEDI input of the external EEPROM (O12), or general purpose I/O 3. |
| 24 | EECLK/GPIO4 | bidirectional | EEPROM clock output to the external EEPROM (O12), or general purpose I/O 4. |
| 25 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 26 | VDD12CORE | power_in | +1.2V digital core power supply input. |
| 27 | VBUS_DET | input | Detects the state of the upstream bus power; for bus powered operation it must be tied to VDD33A. |
| 28 | SUSPEND_N/GPIO5 | bidirectional | Active-low output asserted in suspend states (O12), may place an external switcher in low power state, or general purpose I/O 5. |
| 29 | CONNECT/GPIO6 | bidirectional | Output (O12) asserted when the device is attempting to attach to the USB host (HSIC operation), or general purpose I/O 6. |
| 30 | HSIC_SEL | input | When tied to VDD the HSIC interface is enabled, otherwise the USB 2.0 interface is enabled; static signal that may not be changed at run time. |
| 31 | LED0/GPIO7 | bidirectional | Open-drain (OD12) indicator LED 0 for Ethernet link, activity, duplex and collision, or general purpose I/O 7. |
| 32 | PME_MODE/GPIO8 | bidirectional | PME mode selection input when PME mode of operation is in effect, or general purpose I/O 8. |
| 33 | VDD12A | power_in | +1.2V analog power supply input for the USB PLL/AFE. |
| 34 | VDD12HSIC | power_in | +1.2V HSIC power supply input. |
| 35 | STROBE | bidirectional | HSIC bidirectional data strobe signal as defined in the High-Speed Inter-Chip USB Electrical Specification. |
| 36 | USB_DP | bidirectional | Hi-Speed USB data plus. |
| 37 | USB_DM | bidirectional | Hi-Speed USB data minus. |
| 38 | DATA | bidirectional | HSIC bidirectional double data rate data signal synchronous to STROBE. |
| 39 | PME_N | output | Signals PME when the PME mode of operation is in effect (O8/OD8). |
| 40 | TEST | input | Active high test pin that selects JTAG test mode when asserted; connect to ground for proper functional operation. |
| 41 | RESET_N/PME_CLEAR | input | Active-low system reset (pull up to VDD if unused), or PME clear input when PME mode of operation is in effect. |
| 42 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 43 | USBRBIAS | passive | Sets HS transmit current level and on-chip termination impedance; connect to an external 12K 1.0% resistor to ground. |
| 44 | VDD33A | power_in | +3.3V analog power supply for the USB 2.0 AFE. |
| 45 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 46 | XI | input | External 25 MHz crystal input; may also be driven by a single-ended clock oscillator with XO left unconnected. |
| 47 | XO | output | External 25 MHz crystal output. |
| 48 | VDD12CORE | power_in | +1.2V digital core power supply input. |
| 49 | LED1/GPIO9 | bidirectional | Open-drain (OD12) indicator LED 1 for Ethernet link, activity, duplex and collision, or general purpose I/O 9. |
| 50 | LED2/GPIO10 | bidirectional | Open-drain (OD12) indicator LED 2 for Ethernet link, activity, duplex and collision, or general purpose I/O 10. |
| 51 | LED3/GPIO11 | bidirectional | Open-drain (OD12) indicator LED 3 for Ethernet link, activity, duplex and collision, or general purpose I/O 11. |
| 52 | VDD12A | power_in | +1.2V analog power supply input for the USB PLL/AFE. |
| 53 | VDD25_REG_OUT | power_out | +2.5V output from the integrated LDO, used to supply the Gigabit Ethernet PHY AFE. |
| 54 | VDD33_REG_IN | power_in | +3.3V power supply input to the integrated LDO. |
| 55 | REF_REXT | passive | External PHY reference resistor; connect to an external 2K 1.0% resistor to ground. |
| 56 | REF_FILT | passive | External PHY reference filter; connect to an external 1uF capacitor to ground. |
| 57 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-56-EP(8x8) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 57 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDDVARIO, VDD_SW_IN, VDD33_REG_IN) | -0.5 | 4.6 | V | 258 | |||
| +3.3 V Analog Supply Voltage | VDD33A | -0.5 | 4.6 | V | 258 | ||
| +2.5 V Analog Supply Voltage | VDD25A | -0.5 | 3.2 | V | 258 | ||
| +1.2 V Analog Supply Voltage | VDD12A | -0.5 | 1.5 | V | 258 | ||
| Digital Supply Voltage (VDD12CORE, VDD12HSIC) | VDD12CORE | -0.5 | 1.5 | V | 258 | ||
| Positive voltage on input signal pins, with respect to ground | 4.6 | V | 258 | ||||
| Negative voltage on input signal pins, with respect to ground | -0.5 | V | 258 | ||||
| Storage Temperature | -65 | 150 | oC | 258 | |||
| HBM ESD Performance | -2 | 2 | kV | 258 | |||
| Supply Voltage (VDD33_REG_IN) | VDD33_REG_IN | 2.97 | 3.63 | V | 258 | ||
| Supply Voltage (VDD_SW_IN) | VDD_SW_IN | 2.97 | 3.63 | V | 258 | ||
| Supply Voltage (VDDVARIO) | VDDVARIO | 1.62 | 3.63 | V | 258 | ||
| +3.3 V Analog Supply Voltage (VDD33A) | VDD33A | 2.97 | 3.63 | V | 258 | ||
| +2.5 V Analog Supply Voltage (VDD25A) | VDD25A | 2.38 | 2.63 | V | 258 | ||
| +1.2 V Analog Supply Voltage (VDD12A) | VDD12A | 1.1 | 1.26 | V | 258 | ||
| Digital Supply Voltage (VDD12CORE, VDD12HSIC) | VDD12CORE | 1.1 | 1.26 | V | 258 | ||
| Positive voltage on input signal pins, with respect to ground | 3.3 | V | 258 | ||||
| Negative voltage on input signal pins, with respect to ground | -0.3 | V | 258 | ||||
| Ambient Operating Temperature in Still Air (TA) | TA | -40 | 85 | oC | Industrial version (Note 16-2) | 258 | |
| Thermal Resistance Junction to Ambient | JA | 26 | oC/W | 0 m/s air velocity, multi-layer 2S2P PCB | 259 | ||
| Thermal Resistance Junction to Top of Case | JC | 2.3 | oC/W | 0 m/s air velocity, multi-layer 2S2P PCB | 259 | ||
| Thermal Resistance Junction to Board | JB | 14 | oC/W | 0 m/s air velocity, multi-layer 2S2P PCB | 259 | ||
| Thermal Resistance Junction to Bottom of Case | JT | 0.2 | oC/W | 0 m/s air velocity, multi-layer 2S2P PCB | 259 | ||
| O8 Type Input Buffer Low Output Level | VOL | 0.4 | V | IOL = -8 mA | 261 | ||
| OD8 Type Input Buffer Low Output Level | VOL | 0.4 | V | IOL = -8 mA | 261 | ||
| O12 Type Input Buffer Low Output Level | VOL | 0.4 | V | IOL = -12 mA | 261 | ||
| OD12 Type Input Buffer Low Output Level | VOL | 0.4 | V | IOL = -12 mA | 261 | ||
| Input Leakage | IIH | -10 | 10 | uA | VIN = VSS or VDDVARIO | 261 | |
| Input Capacitance | CIN | 2 | pF | 261 | |||
| Frequency Tolerance @ 25oC | Ftol | -50 | 50 | PPM | @ 25oC (Note 16-6) | 265 | |
| Frequency Stability Over Temp | Ftemp | -50 | 50 | PPM | (Note 16-6) | 265 | |
| Total Allowable PPM Budget | -50 | 50 | PPM | (Note 16-8) | 265 | ||
| Shunt Capacitance | CO | 6 | pF | 265 | |||
| Load Capacitance | CL | 18 | pF | 265 | |||
| Drive Level | PW | 250 | uW | 265 | |||
| Equivalent Series Resistance | R1 | 50 | Ohm | 265 | |||
| TCK clock period | ttckp | 40 | ns | 263 | |||
| TDI, TMS setup to TCK rising edge | tsu | 10 | ns | 263 | |||
| TDI, TMS hold from TCK rising edge | th | 10 | ns | 263 | |||
| TDO output valid from TCK falling edge | tdov | 16 | ns | 263 | |||
| TDO output invalid from TCK falling edge | tdoinvld | 0 | ns | 263 | |||
| EECLK Cycle time | tckcyc | 1110 | 1130 | ns | 264 | ||
| EECLK High time | tckh | 550 | 570 | ns | 264 | ||
| EECLK Low time | tckl | 550 | 570 | ns | 264 | ||
| EECS high before rising edge of EECLK | tcshckh | 1070 | ns | 264 | |||
| EEDI setup to rising edge of EECLK | tdsckh | 90 | ns | 264 | |||
| EEDI hold after rising edge of EECLK | tdhckh | 0 | ns | 264 | |||
| EECS low | tcsl | 1070 | ns | 264 |
CAD (KiCad official)
- Symbol:
LAN7850-I - Footprint:
Package_DFN_QFN:QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm - 3D model: QFN-56-EP(8x8) (KiCad packages3D, STEP)
- 3D model files:
lan7850-i-etched.step/lan7850-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lan7850-i.step/lan7850-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (273 pp, sha256
566c3fc8e69cf267, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).