Generated by kicad-footprint-generator · KiCad file format 20260206
LAN7801-I
Microchip Tech · Ethernet ICs · VQFN-64(9x9)
LAN7801-I from Microchip Tech, in a VQFN-64(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF_REXT | passive | External reference resistor pin; connect an external 2K 1.0% resistor to ground. |
| 2 | REF_FILT | passive | External reference filter pin; connect an external 1uF capacitor to ground. |
| 3 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 4 | TXD3 | output | RGMII transmit data bit 3 from the MAC to the external PHY. |
| 5 | TXD2 | output | RGMII transmit data bit 2 from the MAC to the external PHY. |
| 6 | TXD1 | output | RGMII transmit data bit 1 from the MAC to the external PHY. |
| 7 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 8 | TXD0 | output | RGMII transmit data bit 0 from the MAC to the external PHY. |
| 9 | TX_CTL | output | RGMII transmit control indicating transmit data enable (TXEN) and transmit error (TXER) per the RGMII specification. |
| 10 | TXC | output | RGMII transmit clock used to latch data from the MAC into the PHY: 125MHz at 1000BASE-T, 25MHz at 100BASE-TX, 2.5MHz at 10BASE-T. |
| 11 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 12 | RXC | input | RGMII receive clock used to transfer data from the external PHY to the MAC: 125MHz at 1000BASE-T, 25MHz at 100BASE-TX, 2.5MHz at 10BASE-T. |
| 13 | RX_CTL | input | RGMII receive control indicating receive data valid (RXDV) and receive error (RXER) per the RGMII specification. |
| 14 | RXD0 | input | RGMII receive data bit 0 from the external PHY to the MAC. |
| 15 | RXD1 | input | RGMII receive data bit 1 from the external PHY to the MAC. |
| 16 | RXD2 | input | RGMII receive data bit 2 from the external PHY to the MAC. |
| 17 | RXD3 | input | RGMII receive data bit 3 from the external PHY to the MAC. |
| 18 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 19 | CLK125 | input | 125 MHz clock input used to generate the RGMII TX clock. |
| 20 | VDD12_SW_OUT | power_out | +1.2V output of the integrated switching regulator. |
| 21 | VDD_SW_IN | power_in | +3.3V input voltage for the integrated switching regulator. |
| 22 | VDD12_SW_FB | input | Feedback pin for the integrated switching regulator; tie to VDD_SW_IN to disable the switcher. |
| 23 | EECS/GPIO0 | bidirectional | EEPROM chip select output (O12) shared with programmable GPIO0. |
| 24 | EEDI/GPIO1 | bidirectional | EEPROM data input driven by the EEPROM EEDO output, shared with programmable GPIO1. |
| 25 | EEDO/GPIO2 | bidirectional | EEPROM data output (O12) driving the EEPROM EEDI input, shared with programmable GPIO2. |
| 26 | EECLK/GPIO3 | bidirectional | EEPROM clock output (O12) shared with programmable GPIO3. |
| 27 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 28 | VDD12CORE | power_in | +1.2V digital core power supply input. |
| 29 | VBUS_DET | input | Detects upstream VBUS power state (internal pull-down); must be tied to VDD33A for bus-powered operation. |
| 30 | SUSPEND_N | output | Active-low output asserted in USB suspend states; can be configured to place an external switcher in low power such as in SUSPEND2. |
| 31 | PHY_INT_N | input | Interrupt input from the external Ethernet PHY. |
| 32 | PHY_RESET_N | output | Reset output (O12) to the external Ethernet PHY. |
| 33 | DUPLEX | input | Duplex mode input from the external PHY (asserted = full duplex); tie to VDD to force full duplex if the PHY has no duplex output. |
| 34 | NC | unconnected | No connect; must be left unconnected for proper operation. |
| 35 | GPIO4 | bidirectional | General purpose I/O programmable as push-pull output, open-drain output or Schmitt-triggered input with optional pull-up. |
| 36 | PME_MODE/GPIO5 | bidirectional | PME mode selection input when PME mode is in effect, otherwise programmable GPIO5. |
| 37 | VDD12A | power_in | +1.2V analog power supply input for USB PLL/AFE. |
| 38 | USB2_DP | bidirectional | Hi-Speed USB 2.0 data plus. |
| 39 | USB2_DM | bidirectional | Hi-Speed USB 2.0 data minus. |
| 40 | USB3_TXDP | output | SuperSpeed USB 3.1 Gen 1 transmit data plus. |
| 41 | USB3_TXDM | output | SuperSpeed USB 3.1 Gen 1 transmit data minus. |
| 42 | VDD12A | power_in | +1.2V analog power supply input for USB PLL/AFE. |
| 43 | USB3_RXDP | input | SuperSpeed USB 3.1 Gen 1 receive data plus. |
| 44 | USB3_RXDM | input | SuperSpeed USB 3.1 Gen 1 receive data minus. |
| 45 | PME_N/GPIO6 | bidirectional | PME signal output (O8/OD8) when PME mode is in effect, otherwise programmable GPIO6. |
| 46 | TEST | input | Internal-use test pin that must be connected to ground for proper operation. |
| 47 | RESET_N/PME_CLEAR | input | Active-low system reset (pull up to VDD if unused); serves as PME clear input when PME mode is in effect. |
| 48 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 49 | USBRBIAS | passive | Sets HS transmit current level and on-chip termination impedance; connect an external 12K 1.0% resistor to ground. |
| 50 | VDD33A | power_in | +3.3V analog power supply for the USB 2.0 AFE. |
| 51 | VDDVARIO | power_in | +1.8V to +3.3V variable supply for the I/Os. |
| 52 | XI | input | External 25 MHz crystal input; can also be driven by a single-ended clock oscillator. |
| 53 | XO | output | External 25 MHz crystal output; leave unconnected when XI is driven by a single-ended oscillator. |
| 54 | VDD12CORE | power_in | +1.2V digital core power supply input. |
| 55 | MDIO | bidirectional | Serial Management Interface data to/from the external PHY; external pull-up required when MII management is used. |
| 56 | MDC | output | Serial Management Interface clock output (O12) to the external Ethernet PHY. |
| 57 | TDI/GPIO7 | bidirectional | JTAG data input shared with programmable GPIO7. |
| 58 | TCK/GPIO8 | bidirectional | JTAG test clock (max operating frequency half of the system clock) shared with programmable GPIO8. |
| 59 | TMS/GPIO9 | bidirectional | JTAG test mode select shared with programmable GPIO9. |
| 60 | TDO/GPIO10 | bidirectional | JTAG data output (O12) shared with programmable GPIO10. |
| 61 | REFCLK_25/GPIO11 | bidirectional | 25 MHz reference clock output (O12) for the external Gigabit PHY, shared with programmable GPIO11. |
| 62 | VDD12A | power_in | +1.2V analog power supply input for USB PLL/AFE. |
| 63 | VDD25_REG_OUT | power_out | +2.5V output from the integrated LDO. |
| 64 | VDD33_REG_IN | power_in | +3.3V power supply input to the integrated LDO. |
| 65 | VSS | power_in | Exposed pad, common ground; must be connected to ground with a via field. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | VQFN-64(9x9) |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDDVARIO, VDD_SW_IN, VDD33_REG_IN | -0.5 | 4.6 | V | Note 15-1 | 225 | |
| +3.3 V Analog Supply Voltage | VDD33A | -0.5 | 4.6 | V | Note 15-1 | 225 | |
| +1.2 V Analog Supply Voltage | VDD12A | -0.5 | 1.5 | V | Note 15-1 | 225 | |
| Digital Supply Voltage | VDD12CORE | -0.5 | 1.5 | V | Note 15-1 | 225 | |
| Positive voltage on input signal pins | 4.6 | V | with respect to ground | 225 | |||
| Negative voltage on input signal pins | -0.5 | V | with respect to ground | 225 | |||
| Storage Temperature | -65 | 150 | C | 225 | |||
| HBM ESD Performance | -2 | 2 | kV | HBM | 225 | ||
| Supply Voltage | VDD33_REG_IN | 2.97 | 3.63 | V | Note 15-1 | 225 | |
| Supply Voltage | VDDVARIO | 1.62 | 3.63 | V | Note 15-1 | 225 | |
| +3.3 V Analog Supply Voltage | VDD33A | 2.97 | 3.63 | V | Note 15-1 | 225 | |
| +1.2 V Analog Supply Voltage | VDD12A | 1.1 | 1.26 | V | Note 15-1 | 225 | |
| Digital Supply Voltage | VDD12CORE | 1.1 | 1.26 | V | Note 15-1 | 225 | |
| Positive voltage on input signal pins | 3.3 | V | with respect to ground | 225 | |||
| Negative voltage on input signal pins | -0.3 | V | with respect to ground | 225 | |||
| Ambient Operating Temperature in Still Air (industrial version, -I) | TA | -40 | 85 | C | Still air; Note 15-2 industrial version | 225 | |
| Low Input Level | VILI | -0.3 | V | Type input buffer; Schmitt trigger | 227 | ||
| Input Leakage | IIH | -10 | 10 | uA | VIN = VSS or VDDVARIO | 227 | |
| Input Capacitance | CIN | 2 | pF | Note 15-3 | 227 | ||
| Low Output Level (O8) | VOL | 0.4 | V | IOL = -8 mA | 227 | ||
| Low Output Level (OD8) | VOL | 0.4 | V | IOL = -8 mA | 227 | ||
| Low Output Level (O12) | VOL | 0.4 | V | IOL = -12 mA | 227 | ||
| Low Output Level (OD12) | VOL | 0.4 | V | IOL = -12 mA | 227 | ||
| Low Input Level (ICLK, XI input) | VILI | -0.3 | 0.5 | V | Note 15-4 | 227 | |
| High Input Level (ICLK, XI input) | VIHI | 0.85 | V | Note 15-4 | 227 | ||
| RESET_N input assertion time | trstia | 1 | s | Minimum assertion period | 228 | ||
| EECLK Cycle time | tckcyc | 1110 | 1130 | ns | 235 | ||
| EECLK High time | tckh | 550 | 570 | ns | 235 | ||
| EECLK Low time | tckl | 550 | 570 | ns | 235 | ||
| EECS high before rising edge of EECLK | tcshckh | 1070 | ns | 235 | |||
| EECLK falling edge to EECS low | tcklcsl | 30 | ns | 235 | |||
| EEDO valid before rising edge of EECLK | tdvckh | 550 | ns | 235 | |||
| EEDO invalid after rising edge EECLK | tckhinvld | 550 | ns | 235 | |||
| EEDI setup to rising edge of EECLK | tdsckh | 90 | ns | 235 | |||
| EEDI hold after rising edge of EECLK | tdhckh | 0 | ns | 235 | |||
| EECLK low to data disable (OUTPUT) | tckldis | 580 | ns | 235 | |||
| EEDIO valid after EECS high (VERIFY) | tcshdv | 600 | ns | VERIFY | 235 | ||
| EEDIO hold after EECS low (VERIFY) | tdhcsl | 0 | ns | VERIFY | 235 | ||
| EECS low | tcsl | 1070 | ns | 235 | |||
| Frequency Tolerance | Ftol | -50 | 50 | PPM | @25 C; Note 15-28 | 236 | |
| Frequency Stability Over Temperature | Ftemp | -50 | 50 | PPM | Note 15-28 | 236 | |
| Total Allowable PPM Budget | -50 | 50 | PPM | Note 15-30 | 236 | ||
| Input clock duty cycle | 40 | 50 | 60 | % | Single-ended clock oscillator input on XI | 236 | |
| Drive Level | PW | 250 | uW | Crystal | 236 | ||
| Shunt Capacitance | CO | 6 | pF | Crystal | 236 | ||
| Load Capacitance | CL | 18 | pF | Crystal | 236 | ||
| Equivalent Series Resistance | R1 | 50 | Ohm | Crystal | 236 | ||
| Thermal Resistance Junction to Ambient | JA | 25 | C/W | Velocity 0 m/s; multi-layer 2S2P PCB | 226 | ||
| Thermal Resistance Junction to Top of Case | JC | 2.2 | C/W | Velocity 0 m/s | 226 | ||
| Thermal Resistance Junction to Board | JB | 13 | C/W | Velocity 0 m/s | 226 | ||
| Thermal Resistance Junction to Bottom of Case | JT | 0.2 | C/W | Velocity 0 m/s | 226 | ||
| Absolute Max Power Dissipation (VDDVARIO = 3.3 V) | 425 | mW | VDDVARIO = 3.3 V | 226 | |||
| Absolute Max Power Dissipation (VDDVARIO = 2.5 V) | 405 | mW | VDDVARIO = 2.5 V | 226 | |||
| Absolute Max Power Dissipation (VDDVARIO = 1.8 V) | 382 | mW | VDDVARIO = 1.8 V | 226 | |||
| High Input Level (I/O buffer, VIHI) | VIHI | 3.6 | V | Schmitt trigger | 227 | ||
| Frequency | Ffund | 25 | MHz | Fundamental mode; parallel resonant | 236 | ||
| XI Pin Capacitance | 3 | pF | Note 15-33 | 236 | |||
| XO Pin Capacitance | 3 | pF | Note 15-33 | 236 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ABS | 10BASE-T 26 0.9 0.8 0.5 87 86 85 TABLE 15-3: ABSOLUTE MAX POWER DISSIPATION | 226 |
CAD (KiCad official)
- Symbol:
LAN7801-I - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: VQFN-64(9x9) (KiCad packages3D, STEP)
- 3D model files:
lan7801-i-etched.step/lan7801-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lan7801-i.step/lan7801-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (244 pp, sha256
f8567c49c614f397, retrieved 2026-11-07, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).