Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LAN7801-I

Microchip Tech · Ethernet ICs · VQFN-64(9x9)

LAN7801-I from Microchip Tech, in a VQFN-64(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF_REXT passive External reference resistor pin; connect an external 2K 1.0% resistor to ground.
2 REF_FILT passive External reference filter pin; connect an external 1uF capacitor to ground.
3 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
4 TXD3 output RGMII transmit data bit 3 from the MAC to the external PHY.
5 TXD2 output RGMII transmit data bit 2 from the MAC to the external PHY.
6 TXD1 output RGMII transmit data bit 1 from the MAC to the external PHY.
7 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
8 TXD0 output RGMII transmit data bit 0 from the MAC to the external PHY.
9 TX_CTL output RGMII transmit control indicating transmit data enable (TXEN) and transmit error (TXER) per the RGMII specification.
10 TXC output RGMII transmit clock used to latch data from the MAC into the PHY: 125MHz at 1000BASE-T, 25MHz at 100BASE-TX, 2.5MHz at 10BASE-T.
11 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
12 RXC input RGMII receive clock used to transfer data from the external PHY to the MAC: 125MHz at 1000BASE-T, 25MHz at 100BASE-TX, 2.5MHz at 10BASE-T.
13 RX_CTL input RGMII receive control indicating receive data valid (RXDV) and receive error (RXER) per the RGMII specification.
14 RXD0 input RGMII receive data bit 0 from the external PHY to the MAC.
15 RXD1 input RGMII receive data bit 1 from the external PHY to the MAC.
16 RXD2 input RGMII receive data bit 2 from the external PHY to the MAC.
17 RXD3 input RGMII receive data bit 3 from the external PHY to the MAC.
18 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
19 CLK125 input 125 MHz clock input used to generate the RGMII TX clock.
20 VDD12_SW_OUT power_out +1.2V output of the integrated switching regulator.
21 VDD_SW_IN power_in +3.3V input voltage for the integrated switching regulator.
22 VDD12_SW_FB input Feedback pin for the integrated switching regulator; tie to VDD_SW_IN to disable the switcher.
23 EECS/GPIO0 bidirectional EEPROM chip select output (O12) shared with programmable GPIO0.
24 EEDI/GPIO1 bidirectional EEPROM data input driven by the EEPROM EEDO output, shared with programmable GPIO1.
25 EEDO/GPIO2 bidirectional EEPROM data output (O12) driving the EEPROM EEDI input, shared with programmable GPIO2.
26 EECLK/GPIO3 bidirectional EEPROM clock output (O12) shared with programmable GPIO3.
27 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
28 VDD12CORE power_in +1.2V digital core power supply input.
29 VBUS_DET input Detects upstream VBUS power state (internal pull-down); must be tied to VDD33A for bus-powered operation.
30 SUSPEND_N output Active-low output asserted in USB suspend states; can be configured to place an external switcher in low power such as in SUSPEND2.
31 PHY_INT_N input Interrupt input from the external Ethernet PHY.
32 PHY_RESET_N output Reset output (O12) to the external Ethernet PHY.
33 DUPLEX input Duplex mode input from the external PHY (asserted = full duplex); tie to VDD to force full duplex if the PHY has no duplex output.
34 NC unconnected No connect; must be left unconnected for proper operation.
35 GPIO4 bidirectional General purpose I/O programmable as push-pull output, open-drain output or Schmitt-triggered input with optional pull-up.
36 PME_MODE/GPIO5 bidirectional PME mode selection input when PME mode is in effect, otherwise programmable GPIO5.
37 VDD12A power_in +1.2V analog power supply input for USB PLL/AFE.
38 USB2_DP bidirectional Hi-Speed USB 2.0 data plus.
39 USB2_DM bidirectional Hi-Speed USB 2.0 data minus.
40 USB3_TXDP output SuperSpeed USB 3.1 Gen 1 transmit data plus.
41 USB3_TXDM output SuperSpeed USB 3.1 Gen 1 transmit data minus.
42 VDD12A power_in +1.2V analog power supply input for USB PLL/AFE.
43 USB3_RXDP input SuperSpeed USB 3.1 Gen 1 receive data plus.
44 USB3_RXDM input SuperSpeed USB 3.1 Gen 1 receive data minus.
45 PME_N/GPIO6 bidirectional PME signal output (O8/OD8) when PME mode is in effect, otherwise programmable GPIO6.
46 TEST input Internal-use test pin that must be connected to ground for proper operation.
47 RESET_N/PME_CLEAR input Active-low system reset (pull up to VDD if unused); serves as PME clear input when PME mode is in effect.
48 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
49 USBRBIAS passive Sets HS transmit current level and on-chip termination impedance; connect an external 12K 1.0% resistor to ground.
50 VDD33A power_in +3.3V analog power supply for the USB 2.0 AFE.
51 VDDVARIO power_in +1.8V to +3.3V variable supply for the I/Os.
52 XI input External 25 MHz crystal input; can also be driven by a single-ended clock oscillator.
53 XO output External 25 MHz crystal output; leave unconnected when XI is driven by a single-ended oscillator.
54 VDD12CORE power_in +1.2V digital core power supply input.
55 MDIO bidirectional Serial Management Interface data to/from the external PHY; external pull-up required when MII management is used.
56 MDC output Serial Management Interface clock output (O12) to the external Ethernet PHY.
57 TDI/GPIO7 bidirectional JTAG data input shared with programmable GPIO7.
58 TCK/GPIO8 bidirectional JTAG test clock (max operating frequency half of the system clock) shared with programmable GPIO8.
59 TMS/GPIO9 bidirectional JTAG test mode select shared with programmable GPIO9.
60 TDO/GPIO10 bidirectional JTAG data output (O12) shared with programmable GPIO10.
61 REFCLK_25/GPIO11 bidirectional 25 MHz reference clock output (O12) for the external Gigabit PHY, shared with programmable GPIO11.
62 VDD12A power_in +1.2V analog power supply input for USB PLL/AFE.
63 VDD25_REG_OUT power_out +2.5V output from the integrated LDO.
64 VDD33_REG_IN power_in +3.3V power supply input to the integrated LDO.
65 VSS power_in Exposed pad, common ground; must be connected to ground with a via field.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package VQFN-64(9x9)
Category Communication Interface Chip/UART/485/232
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDDVARIO, VDD_SW_IN, VDD33_REG_IN -0.5 4.6 V Note 15-1 225
+3.3 V Analog Supply Voltage VDD33A -0.5 4.6 V Note 15-1 225
+1.2 V Analog Supply Voltage VDD12A -0.5 1.5 V Note 15-1 225
Digital Supply Voltage VDD12CORE -0.5 1.5 V Note 15-1 225
Positive voltage on input signal pins 4.6 V with respect to ground 225
Negative voltage on input signal pins -0.5 V with respect to ground 225
Storage Temperature -65 150 C 225
HBM ESD Performance -2 2 kV HBM 225
Supply Voltage VDD33_REG_IN 2.97 3.63 V Note 15-1 225
Supply Voltage VDDVARIO 1.62 3.63 V Note 15-1 225
+3.3 V Analog Supply Voltage VDD33A 2.97 3.63 V Note 15-1 225
+1.2 V Analog Supply Voltage VDD12A 1.1 1.26 V Note 15-1 225
Digital Supply Voltage VDD12CORE 1.1 1.26 V Note 15-1 225
Positive voltage on input signal pins 3.3 V with respect to ground 225
Negative voltage on input signal pins -0.3 V with respect to ground 225
Ambient Operating Temperature in Still Air (industrial version, -I) TA -40 85 C Still air; Note 15-2 industrial version 225
Low Input Level VILI -0.3 V Type input buffer; Schmitt trigger 227
Input Leakage IIH -10 10 uA VIN = VSS or VDDVARIO 227
Input Capacitance CIN 2 pF Note 15-3 227
Low Output Level (O8) VOL 0.4 V IOL = -8 mA 227
Low Output Level (OD8) VOL 0.4 V IOL = -8 mA 227
Low Output Level (O12) VOL 0.4 V IOL = -12 mA 227
Low Output Level (OD12) VOL 0.4 V IOL = -12 mA 227
Low Input Level (ICLK, XI input) VILI -0.3 0.5 V Note 15-4 227
High Input Level (ICLK, XI input) VIHI 0.85 V Note 15-4 227
RESET_N input assertion time trstia 1 s Minimum assertion period 228
EECLK Cycle time tckcyc 1110 1130 ns 235
EECLK High time tckh 550 570 ns 235
EECLK Low time tckl 550 570 ns 235
EECS high before rising edge of EECLK tcshckh 1070 ns 235
EECLK falling edge to EECS low tcklcsl 30 ns 235
EEDO valid before rising edge of EECLK tdvckh 550 ns 235
EEDO invalid after rising edge EECLK tckhinvld 550 ns 235
EEDI setup to rising edge of EECLK tdsckh 90 ns 235
EEDI hold after rising edge of EECLK tdhckh 0 ns 235
EECLK low to data disable (OUTPUT) tckldis 580 ns 235
EEDIO valid after EECS high (VERIFY) tcshdv 600 ns VERIFY 235
EEDIO hold after EECS low (VERIFY) tdhcsl 0 ns VERIFY 235
EECS low tcsl 1070 ns 235
Frequency Tolerance Ftol -50 50 PPM @25 C; Note 15-28 236
Frequency Stability Over Temperature Ftemp -50 50 PPM Note 15-28 236
Total Allowable PPM Budget -50 50 PPM Note 15-30 236
Input clock duty cycle 40 50 60 % Single-ended clock oscillator input on XI 236
Drive Level PW 250 uW Crystal 236
Shunt Capacitance CO 6 pF Crystal 236
Load Capacitance CL 18 pF Crystal 236
Equivalent Series Resistance R1 50 Ohm Crystal 236
Thermal Resistance Junction to Ambient JA 25 C/W Velocity 0 m/s; multi-layer 2S2P PCB 226
Thermal Resistance Junction to Top of Case JC 2.2 C/W Velocity 0 m/s 226
Thermal Resistance Junction to Board JB 13 C/W Velocity 0 m/s 226
Thermal Resistance Junction to Bottom of Case JT 0.2 C/W Velocity 0 m/s 226
Absolute Max Power Dissipation (VDDVARIO = 3.3 V) 425 mW VDDVARIO = 3.3 V 226
Absolute Max Power Dissipation (VDDVARIO = 2.5 V) 405 mW VDDVARIO = 2.5 V 226
Absolute Max Power Dissipation (VDDVARIO = 1.8 V) 382 mW VDDVARIO = 1.8 V 226
High Input Level (I/O buffer, VIHI) VIHI 3.6 V Schmitt trigger 227
Frequency Ffund 25 MHz Fundamental mode; parallel resonant 236
XI Pin Capacitance 3 pF Note 15-33 236
XO Pin Capacitance 3 pF Note 15-33 236

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ABS 10BASE-T 26 0.9 0.8 0.5 87 86 85 TABLE 15-3: ABSOLUTE MAX POWER DISSIPATION 226

CAD (KiCad official)

  • Symbol: LAN7801-I
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: VQFN-64(9x9) (KiCad packages3D, STEP)
  • 3D model files: lan7801-i-etched.step / lan7801-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lan7801-i.step / lan7801-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (244 pp, sha256 f8567c49c614f397, retrieved 2026-11-07, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF