main
Ray lan7431: etched from the flattened plain STEP (service-occt 1.6.0, from the plain STEP) 6236dff
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580
{
  "slug": "lan7431",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Ethernet Controllers, QFN-72-EP(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "lan7431",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lan7431.kicad_sym",
    "lan7431.kicad_mod",
    "lan7431.glb",
    "lan7431.step",
    "lan7431.lbr",
    "docs/hero.png",
    "docs/lan7431-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "LAN7431",
    "manufacturer": "Microchip Tech",
    "package": "QFN-72-EP(10x10)",
    "pin_count": 73,
    "category": "Interface",
    "subcategory": "Ethernet Controllers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589798628651786240",
    "parts": {
      "symbol": "lan7431.kicad_sym",
      "footprint": "lan7431.kicad_mod",
      "model_3d": "lan7431-etched.glb",
      "model_3d_plain": "lan7431.glb",
      "model_3d_step": "lan7431-etched.step",
      "model_3d_step_plain": "lan7431.step",
      "lbr": "lan7431.lbr"
    },
    "distributor_links": {
      "lcsc": "C633949"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:13:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AVDDH_1",
        "type": "power_in",
        "description": "2.5V or 3.3V power for analog IO; provides power for bandgap reference and crystal oscillator amplifier."
      },
      {
        "number": "2",
        "name": "AVDDL_1",
        "type": "power_in",
        "description": "1.2V power for analog core."
      },
      {
        "number": "3",
        "name": "VDDVARIO_B",
        "type": "power_in",
        "description": "1.8V to 3.3V variable supply for RGMII and MII related IOs."
      },
      {
        "number": "4",
        "name": "TXD3",
        "type": "output",
        "description": "Transmit data output; MAC transmits data to external Ethernet PHY using RGMII signals."
      },
      {
        "number": "5",
        "name": "TXD2",
        "type": "output",
        "description": "Transmit data output; MAC transmits data to external Ethernet PHY using RGMII signals."
      },
      {
        "number": "6",
        "name": "TXD1",
        "type": "output",
        "description": "Transmit data output; MAC transmits data to external Ethernet PHY using RGMII signals."
      },
      {
        "number": "7",
        "name": "VDDVARIO_B",
        "type": "power_in",
        "description": "1.8V to 3.3V variable supply for RGMII and MII related IOs."
      },
      {
        "number": "8",
        "name": "TXD0",
        "type": "output",
        "description": "Transmit data output; MAC transmits data to external Ethernet PHY using RGMII signals."
      },
      {
        "number": "9",
        "name": "TX_ER/MII_EN",
        "type": "output",
        "description": "Indicates transmit error condition in RGMII/MII mode or serves as MII mode configuration strap (pulled high selects MII, low/float selects RGMII)."
      },
      {
        "number": "10",
        "name": "TX_CTL/TX_EN",
        "type": "output",
        "description": "Indicates transmit data enable (TXEN) and transmit error (TXER) functions in RGMII or transmit enable in MII mode."
      },
      {
        "number": "11",
        "name": "TXC/TX_CLK",
        "type": "output",
        "description": "Transmit clock output used to latch data into external Ethernet PHY (125MHz for 1000BASE-T, 25MHz for 100BASE-TX, 2.5MHz for 10BASE-T)."
      },
      {
        "number": "12",
        "name": "VDDVARIO_B",
        "type": "power_in",
        "description": "1.8V to 3.3V variable supply for RGMII and MII related IOs."
      },
      {
        "number": "13",
        "name": "RXC/RX_CLK",
        "type": "input",
        "description": "Receive clock input used to transfer data from external Ethernet PHY to MAC (125MHz for 1000BASE-T, 25MHz for 100BASE-TX, 2.5MHz for 10BASE-T)."
      },
      {
        "number": "14",
        "name": "RX_CTL/RX_DV",
        "type": "input",
        "description": "Indicates receive data valid (RXDV) and receive error (RXER) functions in RGMII or receive data valid in MII mode."
      },
      {
        "number": "15",
        "name": "RXD0",
        "type": "input",
        "description": "Receive data input from external Ethernet PHY in RGMII/MII mode."
      },
      {
        "number": "16",
        "name": "RXD1",
        "type": "input",
        "description": "Receive data input from external Ethernet PHY in RGMII/MII mode."
      },
      {
        "number": "17",
        "name": "RXD2",
        "type": "input",
        "description": "Receive data input from external Ethernet PHY in RGMII/MII mode."
      },
      {
        "number": "18",
        "name": "RXD3",
        "type": "input",
        "description": "Receive data input from external Ethernet PHY in RGMII/MII mode."
      },
      {
        "number": "19",
        "name": "VDDVARIO_B",
        "type": "power_in",
        "description": "1.8V to 3.3V variable supply for RGMII and MII related IOs."
      },
      {
        "number": "20",
        "name": "CLK125/RX_ER",
        "type": "input",
        "description": "125MHz clock input from external Ethernet PHY used to generate RGMII TX clock or receive error indicator in MII mode."
      },
      {
        "number": "21",
        "name": "REFCLK_25/GPIO11",
        "type": "output",
        "description": "25MHz reference clock output to external Ethernet PHY or programmable general purpose I/O."
      },
      {
        "number": "22",
        "name": "COL/GPIO10",
        "type": "input",
        "description": "Collision detect input from external Ethernet PHY (half-duplex mode only) or programmable general purpose I/O."
      },
      {
        "number": "23",
        "name": "CRS",
        "type": "input",
        "description": "Carrier sense input indicating detection of carrier by external Ethernet PHY (half-duplex mode only)."
      },
      {
        "number": "24",
        "name": "VDD12CORE",
        "type": "power_in",
        "description": "1.2V digital core power supply."
      },
      {
        "number": "25",
        "name": "VP",
        "type": "power_in",
        "description": "1.2V PCIe PHY analog and digital power supply."
      },
      {
        "number": "26",
        "name": "GD_1",
        "type": "power_in",
        "description": "PCIe ground connection."
      },
      {
        "number": "27",
        "name": "PCIE_RX_P",
        "type": "input",
        "description": "PCIe serial data input positive for 2.5 GT/s differential link."
      },
      {
        "number": "28",
        "name": "PCIE_RX_M",
        "type": "input",
        "description": "PCIe serial data input negative for 2.5 GT/s differential link."
      },
      {
        "number": "29",
        "name": "GD_2",
        "type": "power_in",
        "description": "PCIe ground connection."
      },
      {
        "number": "30",
        "name": "PCIE_TX_P",
        "type": "output",
        "description": "PCIe serial data output positive for 2.5 GT/s differential link requiring 100nF to 200nF series capacitor."
      },
      {
        "number": "31",
        "name": "VPTX",
        "type": "power_in",
        "description": "1.2V PCIe PHY transmit power supply."
      },
      {
        "number": "32",
        "name": "PCIE_TX_M",
        "type": "output",
        "description": "PCIe serial data output negative for 2.5 GT/s differential link requiring 100nF to 200nF series capacitor."
      },
      {
        "number": "33",
        "name": "GD_3",
        "type": "power_in",
        "description": "PCIe ground connection."
      },
      {
        "number": "34",
        "name": "VPH",
        "type": "power_in",
        "description": "2.5V PCIe PHY power supply."
      },
      {
        "number": "35",
        "name": "RESREF",
        "type": "passive",
        "description": "External reference resistor connection; should be connected to ground through 200 ohm 1% 100 ppm/C resistor for PHY termination impedance calibration."
      },
      {
        "number": "36",
        "name": "PCIE_CLK_P",
        "type": "input",
        "description": "PCIe differential reference clock input positive receiving 100MHz differential clock input."
      },
      {
        "number": "37",
        "name": "PCIE_CLK_M",
        "type": "input",
        "description": "PCIe differential reference clock input negative receiving 100MHz differential clock input."
      },
      {
        "number": "38",
        "name": "VDD25_REG_OUT",
        "type": "power_out",
        "description": "2.5V output supply from integrated LDO regulator used to supply power to PCIe PHY and Ethernet PHY."
      },
      {
        "number": "39",
        "name": "VDD_REG_IN",
        "type": "power_in",
        "description": "3.3V input supply to integrated LDO regulator (if set to 2.5V shall be externally connected to VDD25_REG_OUT)."
      },
      {
        "number": "40",
        "name": "DUPLEX",
        "type": "input",
        "description": "Duplex mode input from external Ethernet PHY; when set indicates full-duplex mode or should be tied to VDDVARIO if PHY lacks duplex output."
      },
      {
        "number": "41",
        "name": "PHY_INT_N",
        "type": "input",
        "description": "Interrupt input from external Ethernet PHY."
      },
      {
        "number": "42",
        "name": "PHY_RESET_N",
        "type": "output",
        "description": "Reset output to external Ethernet PHY."
      },
      {
        "number": "43",
        "name": "VDDVARIO",
        "type": "power_in",
        "description": "1.8V to 3.3V variable supply for general IOs."
      },
      {
        "number": "44",
        "name": "RESET_N",
        "type": "input",
        "description": "System reset input active low; must be pulled up to VDDVARIO if unused."
      },
      {
        "number": "45",
        "name": "TEST",
        "type": "input",
        "description": "Test mode enable input; must be connected to ground for proper functional operation."
      },
      {
        "number": "46",
        "name": "VDD12CORE",
        "type": "power_in",
        "description": "1.2V digital core power supply."
      },
      {
        "number": "47",
        "name": "GPIO9/TCK",
        "type": "input",
        "description": "Programmable general purpose I/O or JTAG test clock input (maximum operating frequency is half of system clock)."
      },
      {
        "number": "48",
        "name": "VDDVARIO",
        "type": "power_in",
        "description": "1.8V to 3.3V variable supply for general IOs."
      },
      {
        "number": "49",
        "name": "GPIO8/TDI",
        "type": "input",
        "description": "Programmable general purpose I/O or JTAG data input."
      },
      {
        "number": "50",
        "name": "GPIO7/TMS",
        "type": "input",
        "description": "Programmable general purpose I/O or JTAG test mode select input."
      },
      {
        "number": "51",
        "name": "VDD12_SW_OUT",
        "type": "power_out",
        "description": "1.2V output voltage from integrated switching regulator."
      },
      {
        "number": "52",
        "name": "VDD_SW_IN",
        "type": "power_in",
        "description": "1.8V to 3.3V input voltage for integrated switching regulator."
      },
      {
        "number": "53",
        "name": "VDD12_SW_FB",
        "type": "passive",
        "description": "Feedback pin for integrated switching regulator; tie to VDD_SW_IN to disable switching regulator."
      },
      {
        "number": "54",
        "name": "GPIO6/TDO",
        "type": "output",
        "description": "Programmable general purpose I/O or JTAG test data output."
      },
      {
        "number": "55",
        "name": "GPIO5",
        "type": "bidirectional",
        "description": "Programmable general purpose I/O configurable as push-pull output, open-drain output, or Schmitt-triggered input with pull-up; pull-up only enabled when set as GPIO."
      },
      {
        "number": "56",
        "name": "GPIO4",
        "type": "bidirectional",
        "description": "Programmable general purpose I/O configurable as push-pull output, open-drain output, or Schmitt-triggered input with pull-up; pull-up only enabled when set as GPIO."
      },
      {
        "number": "57",
        "name": "VAUX_DET/GPIO3",
        "type": "input",
        "description": "Auxiliary voltage detection input with internal pull-down indicating PME from D3cold support when tied to auxiliary voltage (3.3V) or programmable GPIO (if alternate usage enabled pull-down is disabled)."
      },
      {
        "number": "58",
        "name": "EECLK/GPIO2/ADV_PM_DISABLE",
        "type": "output",
        "description": "EEPROM clock output with internal pull-down during reset or advanced power management disable configuration strap (pulled high disables L1 PM substates) or programmable GPIO."
      },
      {
        "number": "59",
        "name": "EEDIO/GPIO1",
        "type": "bidirectional",
        "description": "EEPROM data input/output bidirectional pin with internal pull-down providing low during reset or programmable GPIO."
      },
      {
        "number": "60",
        "name": "EECS/GPIO0",
        "type": "output",
        "description": "EEPROM chip select output with internal pull-down during reset or programmable GPIO."
      },
      {
        "number": "61",
        "name": "VDDVARIO",
        "type": "power_in",
        "description": "1.8V to 3.3V variable supply for general IOs."
      },
      {
        "number": "62",
        "name": "VDD12CORE",
        "type": "power_in",
        "description": "1.2V digital core power supply."
      },
      {
        "number": "63",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "Management interface data input/output for external Ethernet PHY with internal pull-up; external pull-up required to ensure IDLE state is logic one for MII management interface."
      },
      {
        "number": "64",
        "name": "MDC",
        "type": "output",
        "description": "Management interface clock output to external Ethernet PHY."
      },
      {
        "number": "65",
        "name": "VDD_OTP",
        "type": "power_in",
        "description": "3.3V supply for OTP charge pump and PCIe I/Os (CLKREQ#, WAKE#, PERST#)."
      },
      {
        "number": "66",
        "name": "CLKREQ#",
        "type": "tri_state",
        "description": "Clock request input/open-drain output used for PCIe link clock power management and L1 power management substate control."
      },
      {
        "number": "67",
        "name": "WAKE#",
        "type": "tri_state",
        "description": "Wake signal input/open-drain output driven low when device detects wakeup or used for OBFF events in OBFF mode."
      },
      {
        "number": "68",
        "name": "PERST#",
        "type": "input",
        "description": "Power and clock good indication input indicating that both PCIe power and reference clock are available."
      },
      {
        "number": "69",
        "name": "AVDD12",
        "type": "power_in",
        "description": "1.2V power for PLL/DLL."
      },
      {
        "number": "70",
        "name": "XO",
        "type": "output",
        "description": "25MHz crystal output when using crystal oscillator or unconnected when using external oscillator/reference clock source."
      },
      {
        "number": "71",
        "name": "XI",
        "type": "input",
        "description": "25MHz crystal input when using crystal oscillator or input from 3.3V oscillator/external reference clock source with tolerance ±50ppm."
      },
      {
        "number": "72",
        "name": "ISET",
        "type": "passive",
        "description": "External bias resistor connection; should be connected to ground through 6.04K 1% resistor as external PHY bias reference."
      },
      {
        "number": "73",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Multi-function pins (TX_ER/MII_EN, CLK125/RX_ER, REFCLK_25/GPIO11, COL/GPIO10, GPIO9/TCK, GPIO8/TDI,; GPIO pins with internal pull-ups/pull-downs: pull-up is only enabled when configured as GPIO input; ; Configuration strap pins (MII_EN, ADV_PM_DISABLE) must be augmented with external resistor if connec",
          "49/73 pins cited to the wrong page (name found elsewhere): ['12:VDDVARIO_B@p24', '19:VDDVARIO_B@p24', '23:CRS@p18', '27:PCIE_RX_P@p20']"
        ],
        "pages_sent": 77,
        "cost_usd": 0.9712,
        "at": "2026-10-01T17:12:52"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589798628651786240",
        "pages": 77,
        "sha256": "ad01b0713999a060",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 73,
        "described": 73,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lan7431.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.02,
          10.02,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "93c91c4c9b6e2291d879ad25fce3203d332c3ef96a8ec1147054b6c9eb653c5e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lan7431-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.02,
          10.02,
          0.9
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "45c2981a092848625294e52738443a867cb660ff5d63c90cbd75101f5ed299e1",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}