main
History Download
Ray Publish 0.1.0 5d79885

L93PI

STMicroelectronics · Power Distribution Switches · SOIC-20-300mil

L93PI from STMicroelectronics, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN1 input Logic input 1, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open.
2 IN2 input Logic input 2, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open.
3 DIAG output Open-drain diagnostic output that is low when the device works correctly with PRG low and goes high on overtemperature, disconnected ground or disconnected supply, with VDlow max. 0.5 V at IDL ≤ 1 mA and IDmax 15 mA.
4 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
5 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
6 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
7 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
8 VS power_in Supply voltage pin with operating range 4.5 V to 40 V and absolute maximum range -24 V to 45 V, reverse-bias protected to VS = -24 V.
9 IN3 input Logic input 3, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open.
10 IN4 input Logic input 4, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open.
11 EN input Enable input: high activates the device, while low (VENlow max. 1 V) switches it into sleep mode with quiescent current below 10 µA, and it is internally fixed low when open.
12 OUT4 output Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback.
13 OUT3 output Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback.
14 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
15 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
16 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
17 GND power_in Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground.
18 OUT2 output Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback.
19 OUT1 output Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback.
20 PRG input Program input: high changes the signal transfer polarity from non-inverting to inverting, it is normally connected to VS or GND, and it is internally fixed low when open.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-20-300mil
Category Power Management (PMIC)
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VS -24 45 V no damage or latch 2
Input, enable, program pin voltage VIN -24 45 V no damage or latch 2
Output pin voltage VOUT -0.3 45 V no damage or latch 2
Diagnostic output voltage VDIAG -0.3 45 V no damage or latch 2
Max. energy during flyback EX 2 mJ 2
Supply voltage VS 4.5 40 V 3
Input pin voltage VIN -24 10 V 3
Enable pin voltage VEN -24 45 V 3
Output pin voltage VOUT, VD -0.3 45 V 3
Junction temperature Tj -40 150 °C 3
Thermal resistance junction to ambient Rth (j-amb) 77 97 °C/W mounted on SMPCB board 3
Temperature-monitoring switch-off level TjMon 160 190 °C switch-off level 3
Temperature-monitoring switch-on level TjMon 140 170 °C switch-on level 3
Quiescent current IQ 10 µA -0.3V ≤ VEN ≤ 0.5V; VS = 14V; Tj = 85°C 3
Quiescent current 1.5 2 mA EN = high; VS ≤ 14V 3
Input voltage LOW VINlow -24 2 V 3
Input voltage HIGH VINhigh 2.8 45 V 3
Input current IIN -10 15 µA -24V ≤ Vi ≤ 10V 3
Enable input voltage LOW VENlow -24 1 V 3
Enable input voltage HIGH VENhigh 3.2 V 3
Enable input current IEN 20 50 µA 2.5V ≤ Vi ≤ 25V 3
Output ON-resistance to ground RDSon 1.7 2.3 Ω VS ≥ 6V, IO = 0.3A, Tj = 25°C 3
Output ON-resistance to ground RDSon 3.5 Ω VS ≥ 6V, IO = 0.3A, Tj = 125°C 3
Leakage current IOLeak 15 µA VO = VS = 14V; Tj = 85°C 3
Output voltage during clamping VOClamp 45 52 60 V < 200µs; 10mA ≤ Io ≤ 0.3A 3
Short-circuit current IOSC 400 700 1200 mA 3
Output voltage LOW VDlow 0.3 0.5 V IDL ≤ 1mA 3
Max. output current IDmax 1 5 15 mA Internal current limitation 3
Leakage current IDleak 0.1 1 µA VS = 14V; TJ = 85°C 3
On delay time td,on 2.5 3.5 µs VS = 14V, Cext = 0pF; 10mA ≤ IO ≤ 200mA 4
Off delay time td,off 3 4.5 µs 4
Enable settling time tset 10 µs 4
On or Off diagnostic delay time td,DIAG 10 µs 4
Output slopes Sout 2.5 9 16 V/µs 4
Thermal resistance junction to pins Rth (j-pins) 14 °C/W 3

CAD (KiCad official)

  • Symbol: L93PI
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: l93pi-etched.step / l93pi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l93pi.step / l93pi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (8 pp, sha256 d1d731e1e3279d9a, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF