3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownL93PI
STMicroelectronics · Power Distribution Switches · SOIC-20-300mil
L93PI from STMicroelectronics, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN1 | input | Logic input 1, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open. |
| 2 | IN2 | input | Logic input 2, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open. |
| 3 | DIAG | output | Open-drain diagnostic output that is low when the device works correctly with PRG low and goes high on overtemperature, disconnected ground or disconnected supply, with VDlow max. 0.5 V at IDL ≤ 1 mA and IDmax 15 mA. |
| 4 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 5 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 6 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 7 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 8 | VS | power_in | Supply voltage pin with operating range 4.5 V to 40 V and absolute maximum range -24 V to 45 V, reverse-bias protected to VS = -24 V. |
| 9 | IN3 | input | Logic input 3, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open. |
| 10 | IN4 | input | Logic input 4, TTL/CMOS compatible with Schmitt-trigger hysteresis of typ. 100 mV, VINlow max. 2.0 V and VINhigh min. 2.8 V, protected from -24 V to 45 V, and the output switches off if this input is left open. |
| 11 | EN | input | Enable input: high activates the device, while low (VENlow max. 1 V) switches it into sleep mode with quiescent current below 10 µA, and it is internally fixed low when open. |
| 12 | OUT4 | output | Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback. |
| 13 | OUT3 | output | Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback. |
| 14 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 15 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 16 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 17 | GND | power_in | Ground pin; one of eight GND pins (4, 5, 6, 7, 14, 15, 16, 17) that must all be connected to ground. |
| 18 | OUT2 | output | Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback. |
| 19 | OUT1 | output | Open-drain DMOS low-side output to ground with RDSon 1.7 Ω to 2.3 Ω at 25 °C (VS ≥ 6 V, IO = 0.3 A), minimum current limitation 0.4 A, and clamping to typ. 52 V during flyback. |
| 20 | PRG | input | Program input: high changes the signal transfer polarity from non-inverting to inverting, it is normally connected to VS or GND, and it is internally fixed low when open. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-20-300mil |
| Category | Power Management (PMIC) |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | -24 | 45 | V | no damage or latch | 2 | |
| Input, enable, program pin voltage | VIN | -24 | 45 | V | no damage or latch | 2 | |
| Output pin voltage | VOUT | -0.3 | 45 | V | no damage or latch | 2 | |
| Diagnostic output voltage | VDIAG | -0.3 | 45 | V | no damage or latch | 2 | |
| Max. energy during flyback | EX | 2 | mJ | 2 | |||
| Supply voltage | VS | 4.5 | 40 | V | 3 | ||
| Input pin voltage | VIN | -24 | 10 | V | 3 | ||
| Enable pin voltage | VEN | -24 | 45 | V | 3 | ||
| Output pin voltage | VOUT, VD | -0.3 | 45 | V | 3 | ||
| Junction temperature | Tj | -40 | 150 | °C | 3 | ||
| Thermal resistance junction to ambient | Rth (j-amb) | 77 | 97 | °C/W | mounted on SMPCB board | 3 | |
| Temperature-monitoring switch-off level | TjMon | 160 | 190 | °C | switch-off level | 3 | |
| Temperature-monitoring switch-on level | TjMon | 140 | 170 | °C | switch-on level | 3 | |
| Quiescent current | IQ | 10 | µA | -0.3V ≤ VEN ≤ 0.5V; VS = 14V; Tj = 85°C | 3 | ||
| Quiescent current | 1.5 | 2 | mA | EN = high; VS ≤ 14V | 3 | ||
| Input voltage LOW | VINlow | -24 | 2 | V | 3 | ||
| Input voltage HIGH | VINhigh | 2.8 | 45 | V | 3 | ||
| Input current | IIN | -10 | 15 | µA | -24V ≤ Vi ≤ 10V | 3 | |
| Enable input voltage LOW | VENlow | -24 | 1 | V | 3 | ||
| Enable input voltage HIGH | VENhigh | 3.2 | V | 3 | |||
| Enable input current | IEN | 20 | 50 | µA | 2.5V ≤ Vi ≤ 25V | 3 | |
| Output ON-resistance to ground | RDSon | 1.7 | 2.3 | Ω | VS ≥ 6V, IO = 0.3A, Tj = 25°C | 3 | |
| Output ON-resistance to ground | RDSon | 3.5 | Ω | VS ≥ 6V, IO = 0.3A, Tj = 125°C | 3 | ||
| Leakage current | IOLeak | 15 | µA | VO = VS = 14V; Tj = 85°C | 3 | ||
| Output voltage during clamping | VOClamp | 45 | 52 | 60 | V | < 200µs; 10mA ≤ Io ≤ 0.3A | 3 |
| Short-circuit current | IOSC | 400 | 700 | 1200 | mA | 3 | |
| Output voltage LOW | VDlow | 0.3 | 0.5 | V | IDL ≤ 1mA | 3 | |
| Max. output current | IDmax | 1 | 5 | 15 | mA | Internal current limitation | 3 |
| Leakage current | IDleak | 0.1 | 1 | µA | VS = 14V; TJ = 85°C | 3 | |
| On delay time | td,on | 2.5 | 3.5 | µs | VS = 14V, Cext = 0pF; 10mA ≤ IO ≤ 200mA | 4 | |
| Off delay time | td,off | 3 | 4.5 | µs | 4 | ||
| Enable settling time | tset | 10 | µs | 4 | |||
| On or Off diagnostic delay time | td,DIAG | 10 | µs | 4 | |||
| Output slopes | Sout | 2.5 | 9 | 16 | V/µs | 4 | |
| Thermal resistance junction to pins | Rth (j-pins) | 14 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
L93PI - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
l93pi-etched.step/l93pi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l93pi.step/l93pi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (8 pp, sha256
d1d731e1e3279d9a, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).