Generated by kicad-footprint-generator · KiCad file format 20260206
L7808ABD2T-TR
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-2
L7808ABD2T-TR from STMicroelectronics, in a TO-263-2. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | power_in | Unregulated positive DC input, VI. Absolute maximum 35 V (for VO = 5-18 V). Recommended input bypass capacitor CI = 0.33 µF near the pin. Minimum VI for 8 V regulation is ~10.6 V (dropout ~2 V at IO = 1 A). |
| 2 | GND | power_in | Common / ground reference. On the D²PAK this pin is electrically bonded to the exposed thermal tab, which serves as the primary heat sink path (RthJC = 3 °C/W). |
| 3 | OUTPUT | power_out | Regulated +8 V output, VO. Tolerance ±2 % (A grade): 7.84-8.16 V at TJ = 25 °C, 7.7-8.3 V over full IO/VI/temp range. Delivers up to 1.5 A (typ.) with internal current limiting (~2.2 A peak short-circuit). Recommended output capacitor CO = 0.1 µF for improved transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TO-263-2 |
| Category | PMIC |
| Pins | 3 |
Ordering variants
L7808ABD2T-TRL7808ABD2T-TRVL7808ABD2T-TRV-DG
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (TJ = 25°C) | VO | 7.84 | 8 | 8.16 | V | TJ = 25°C | 11 |
| Output voltage (line and load range) | VO | 7.7 | 8 | 8.3 | V | IO = 5 mA to 1 A, VI = 10.6 to 21 V | 11 |
| Output voltage (IO = 1 A, VI = 21 to 23 V) | VO | 7.7 | 8 | 8.3 | V | IO = 1 A, VI = 21 to 23 V, TJ = 25°C | 11 |
| Line regulation | ΔVO | 12 | 80 | mV | VI = 10.6 to 25 V, IO = 500 mA, TJ = 25°C | 11 | |
| Line regulation | ΔVO | 15 | 80 | mV | VI = 11 to 17 V | 11 | |
| Line regulation | ΔVO | 5 | 40 | mV | VI = 11 to 17 V, TJ = 25°C | 11 | |
| Load regulation | ΔVO | 25 | 100 | mV | IO = 5 mA to 1 A | 11 | |
| Load regulation | ΔVO | 30 | 100 | mV | IO = 5 mA to 1.5 A, TJ = 25°C | 11 | |
| Load regulation | ΔVO | 10 | 50 | mV | IO = 250 to 750 mA | 11 | |
| Quiescent current | Iq | 4.3 | 6 | mA | TJ = 25°C | 11 | |
| Quiescent current (second printed limit) | Iq | 6 | mA | 11 | |||
| Quiescent current change | ΔIq | 0.8 | mA | VI = 11 to 23 V, IO = 500 mA | 11 | ||
| Quiescent current change | ΔIq | 0.5 | mA | IO = 5 mA to 1 A | 11 | ||
| Supply voltage rejection | SVR | 62 | dB | VI = 11.5 to 21.5 V, f = 120 Hz, IO = 500 mA | 11 | ||
| Dropout voltage | Vd | 2 | V | IO = 1 A, TJ = 25°C | 11 | ||
| Output noise voltage | eN | 10 | µV/VO | TA = 25°C, B = 10 Hz to 100 kHz | 11 | ||
| Output resistance | RO | 18 | mΩ | f = 1 kHz | 11 | ||
| Short circuit current | Isc | 0.2 | A | VI = 35 V, TA = 25°C | 11 | ||
| Short circuit peak current | Iscp | 2.2 | A | TJ = 25°C | 11 | ||
| Output voltage drift | ΔVO/ΔT | -0.8 | mV/°C | 11 | |||
| Input voltage DC (VO = 5 to 18 V) | VI | 35 | V | for VO = 5 to 18 V | 7 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 7 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | for L78xxAB | 7 | |
| Thermal resistance junction-case | RthJC | 3 | °C/W | D2PAK package | 7 | ||
| Thermal resistance junction-ambient | RthJA | 62.5 | °C/W | D2PAK package | 7 |
CAD (KiCad official)
- Symbol:
L7808ABD2T-TR - Footprint:
Package_TO_SOT_SMD:TO-263-2 - 3D model: TO-263-2 (KiCad packages3D, STEP)
- 3D model files:
l7808abd2t-tr-etched.step/l7808abd2t-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l7808abd2t-tr.step/l7808abd2t-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (None pp, sha256
b0fc438f1763414b, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).