Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

L7808ABD2T-TR

STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-263-2

L7808ABD2T-TR from STMicroelectronics, in a TO-263-2. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INPUT power_in Unregulated positive DC input, VI. Absolute maximum 35 V (for VO = 5-18 V). Recommended input bypass capacitor CI = 0.33 µF near the pin. Minimum VI for 8 V regulation is ~10.6 V (dropout ~2 V at IO = 1 A).
2 GND power_in Common / ground reference. On the D²PAK this pin is electrically bonded to the exposed thermal tab, which serves as the primary heat sink path (RthJC = 3 °C/W).
3 OUTPUT power_out Regulated +8 V output, VO. Tolerance ±2 % (A grade): 7.84-8.16 V at TJ = 25 °C, 7.7-8.3 V over full IO/VI/temp range. Delivers up to 1.5 A (typ.) with internal current limiting (~2.2 A peak short-circuit). Recommended output capacitor CO = 0.1 µF for improved transient response.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TO-263-2
Category PMIC
Pins 3

Ordering variants

  • L7808ABD2T-TR
  • L7808ABD2T-TRV
  • L7808ABD2T-TRV-DG

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage (TJ = 25°C) VO 7.84 8 8.16 V TJ = 25°C 11
Output voltage (line and load range) VO 7.7 8 8.3 V IO = 5 mA to 1 A, VI = 10.6 to 21 V 11
Output voltage (IO = 1 A, VI = 21 to 23 V) VO 7.7 8 8.3 V IO = 1 A, VI = 21 to 23 V, TJ = 25°C 11
Line regulation ΔVO 12 80 mV VI = 10.6 to 25 V, IO = 500 mA, TJ = 25°C 11
Line regulation ΔVO 15 80 mV VI = 11 to 17 V 11
Line regulation ΔVO 5 40 mV VI = 11 to 17 V, TJ = 25°C 11
Load regulation ΔVO 25 100 mV IO = 5 mA to 1 A 11
Load regulation ΔVO 30 100 mV IO = 5 mA to 1.5 A, TJ = 25°C 11
Load regulation ΔVO 10 50 mV IO = 250 to 750 mA 11
Quiescent current Iq 4.3 6 mA TJ = 25°C 11
Quiescent current (second printed limit) Iq 6 mA 11
Quiescent current change ΔIq 0.8 mA VI = 11 to 23 V, IO = 500 mA 11
Quiescent current change ΔIq 0.5 mA IO = 5 mA to 1 A 11
Supply voltage rejection SVR 62 dB VI = 11.5 to 21.5 V, f = 120 Hz, IO = 500 mA 11
Dropout voltage Vd 2 V IO = 1 A, TJ = 25°C 11
Output noise voltage eN 10 µV/VO TA = 25°C, B = 10 Hz to 100 kHz 11
Output resistance RO 18 mΩ f = 1 kHz 11
Short circuit current Isc 0.2 A VI = 35 V, TA = 25°C 11
Short circuit peak current Iscp 2.2 A TJ = 25°C 11
Output voltage drift ΔVO/ΔT -0.8 mV/°C 11
Input voltage DC (VO = 5 to 18 V) VI 35 V for VO = 5 to 18 V 7
Storage temperature range TSTG -65 150 °C 7
Operating junction temperature range TOP -40 125 °C for L78xxAB 7
Thermal resistance junction-case RthJC 3 °C/W D2PAK package 7
Thermal resistance junction-ambient RthJA 62.5 °C/W D2PAK package 7

CAD (KiCad official)

  • Symbol: L7808ABD2T-TR
  • Footprint: Package_TO_SOT_SMD:TO-263-2
  • 3D model: TO-263-2 (KiCad packages3D, STEP)
  • 3D model files: l7808abd2t-tr-etched.step / l7808abd2t-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l7808abd2t-tr.step / l7808abd2t-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 b0fc438f1763414b, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF