main
Ray
l6564tdtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
b938ba4
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205
{
"schema_version": 1,
"type": "component",
"slug": "l6564tdtr",
"title": "L6564TDTR",
"brief": "STMicroelectronics AC-DC Controllers and Regulators, SSOP-10-150mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"pmic",
"l6564tdtr"
],
"component": {
"mpn": "L6564TDTR",
"manufacturer": "STMicroelectronics",
"package": "SSOP-10-150mil",
"pin_count": 10,
"category": "PMIC",
"subcategory": "AC-DC Controllers and Regulators",
"datasheet": "https://www.st.com/resource/en/datasheet/l6564tdtr.pdf",
"parts": {
"symbol": "l6564tdtr.kicad_sym",
"footprint": "l6564tdtr.kicad_mod",
"model_3d": "l6564tdtr-etched.glb",
"model_3d_plain": "l6564tdtr.glb",
"model_3d_step": "l6564tdtr-etched.step",
"model_3d_step_plain": "l6564tdtr.step",
"lbr": "l6564tdtr.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "INV",
"type": "input",
"description": "Inverting input of the internal error amplifier. Output voltage of the PFC pre-regulator is fed into this pin through a resistor divider. High-impedance input; internal reference is 2.5 V (typ)."
},
{
"number": "2",
"name": "COMP",
"type": "output",
"description": "Error amplifier output. A compensation network between this pin and INV sets the voltage loop stability. Gate driver is inhibited (burst-mode) when VCOMP falls below ~2.4 V."
},
{
"number": "3",
"name": "MULT",
"type": "input",
"description": "Main input to the multiplier. Connected to the rectified mains voltage via a resistor divider to provide the sinusoidal reference for the current loop and to derive RMS mains information. Linear range 0-3 V; internal clamp ~9.5 V."
},
{
"number": "4",
"name": "CS",
"type": "input",
"description": "PWM comparator current-sense input. MOSFET current is sensed through a shunt and applied here; compared to an internal reference to terminate the on-time. A second 1.7 V comparator detects abnormal currents (inductor saturation) and triggers a safety hiccup."
},
{
"number": "5",
"name": "VFF",
"type": "input",
"description": "Voltage feedforward input to the multiplier for the 1/V^2 function. A capacitor and parallel resistor (100 kΩ min to 2 MΩ max) from this pin to GND complete the peak-holding circuit that derives RMS mains information. Also feeds the brownout comparator: <0.8 V shuts down the IC (not latched); restart above 0.88 V."
},
{
"number": "6",
"name": "PFC_OK",
"type": "input",
"description": "PFC pre-regulator output-voltage monitoring / disable input. Senses PFC output through a resistor divider. Above 2.5 V the IC stops switching (OVP); if simultaneously VINV<1.66 V a feedback failure is latched off. Below 0.23 V the IC is shut down; restart above 0.27 V (usable as remote on/off)."
},
{
"number": "7",
"name": "ZCD",
"type": "input",
"description": "Boost-inductor demagnetization sensing input for transition-mode operation. A negative-going edge triggers MOSFET turn-on. Max ZCD current -10 mA (source) / 10 mA (sink)."
},
{
"number": "8",
"name": "GND",
"type": "power_in",
"description": "Ground. Common current return for both the signal part of the IC and the gate driver."
},
{
"number": "9",
"name": "GD",
"type": "output",
"description": "Gate driver output. Totem-pole stage capable of 600 mA source / 800 mA sink for MOSFET or IGBT drive. High-level clamped at ~12 V to prevent excessive gate voltages; active pull-down during UVLO."
},
{
"number": "10",
"name": "Vcc",
"type": "power_in",
"description": "Supply voltage for both the signal part of the IC and the gate driver. Operating range 10.3-22.5 V after turn-on; turn-on threshold ~12 V, turn-off ~9.5 V, internal Zener clamp ~25 V. A ~0.1 µF bypass to GND is recommended."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://www.st.com/resource/en/datasheet/l6564tdtr.pdf",
"pages": 33,
"sha256": "d9194e06a2a0df36",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 10,
"described": 10,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "l6564tdtr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.1,
4.9,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "67b52412e9c230c40c0bdcb2098b238633f27dfc65692a16abf3448995fbe697",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "l6564tdtr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.1,
4.9,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "f24d0b7d07ee1c789fd1f45981b3ddafcb48b6cd9b1cfac90cf250122936b419",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "SSOP-10-150mil",
"Category": "PMIC",
"Pins": "10"
}
},
"variants": [
{
"mpn": "L6564TDTR",
"kind": "packaging"
}
],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"l6564tdtr"
],
"discovery_pitch": "L6564TDTR (STMicroelectronics) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"l6564tdtr.kicad_sym",
"l6564tdtr.kicad_mod",
"l6564tdtr.glb",
"l6564tdtr.step",
"l6564tdtr.lbr",
"docs/hero.png",
"docs/l6564tdtr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"updated_at": "2026-09-24T23:29:20.530Z"
}