main
Ray l6563atr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) f88bee1
{
  "slug": "l6563atr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics AC-DC Controllers And Regulators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "l6563atr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "l6563atr.kicad_sym",
    "l6563atr.kicad_mod",
    "l6563atr.glb",
    "l6563atr.step",
    "l6563atr.lbr",
    "docs/hero.png",
    "docs/l6563atr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "L6563ATR",
    "manufacturer": "STMicroelectronics",
    "package": "SOIC-14",
    "pin_count": 14,
    "category": "Power Management (PMIC)",
    "subcategory": "AC-DC Controllers And Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590918754861993984",
    "parts": {
      "symbol": "l6563atr.kicad_sym",
      "footprint": "l6563atr.kicad_mod",
      "model_3d": "l6563atr-etched.glb",
      "model_3d_plain": "l6563atr.glb",
      "model_3d_step": "l6563atr-etched.step",
      "model_3d_step_plain": "l6563atr.step",
      "lbr": "l6563atr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2970939"
    },
    "pins": [
      {
        "number": "1",
        "name": "INV",
        "type": "input",
        "description": "Inverting input of error amplifier for output voltage feedback via resistor divider; input impedance high, can sink current from TBO pin during tracking boost operation."
      },
      {
        "number": "2",
        "name": "COMP",
        "type": "output",
        "description": "Error amplifier output with frequency compensation network to INV pin; output clamp voltage 2.1 to 6.7V depending on input state."
      },
      {
        "number": "3",
        "name": "MULT",
        "type": "input",
        "description": "Multiplier main input receiving rectified mains voltage reference via resistor divider; linear operation 0 to 3V with internal clamp at 9 to 9.5V."
      },
      {
        "number": "4",
        "name": "CS",
        "type": "input",
        "description": "PWM comparator current sense input detecting MOSFET current through sense resistor; normal operation limit ~1.08V for turn-off comparison."
      },
      {
        "number": "5",
        "name": "VFF",
        "type": "input",
        "description": "Voltage feedforward input for 1/V² compensation; connect external RC peak-holding network to ground; operating range 0.5 to 3V with 20mV dropout from MULT peak."
      },
      {
        "number": "6",
        "name": "TBO",
        "type": "output",
        "description": "Tracking boost output providing buffered VFF voltage; external resistor to ground defines mains-tracking current sink from INV pin (maximum current 0.25mA)."
      },
      {
        "number": "7",
        "name": "PFC_OK",
        "type": "input",
        "description": "PFC output voltage monitor input for feedback failure protection; latch-off when exceeds 2.5V or auto-disable when below 0.2V with re-enable threshold 0.26V."
      },
      {
        "number": "8",
        "name": "PWM_LATCH",
        "type": "tri_state",
        "description": "Open-source fault output asserted high (3.7V minimum) when PFC_OK exceeds 2.5V for feedback failure detection; signals cascaded DC-DC converter PWM controller with latched shutdown."
      },
      {
        "number": "9",
        "name": "PWM_STOP",
        "type": "tri_state",
        "description": "Open-drain fault output pulled low (1V at 0.5mA sink) when RUN input disabled below 0.52V; signals temporary disable to cascaded DC-DC converter PWM controller."
      },
      {
        "number": "10",
        "name": "RUN",
        "type": "input",
        "description": "Remote ON/OFF control input for brownout protection; disable threshold 0.5 to 0.54V, re-enable threshold 0.56 to 0.64V with hysteresis for non-latched shutdown."
      },
      {
        "number": "11",
        "name": "ZCD",
        "type": "input",
        "description": "Zero-current detector input for boost inductor demagnetization sensing in transition-mode operation; negative-going edge triggers MOSFET turn-on."
      },
      {
        "number": "12",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; signal and power current return for IC logic and gate driver output stage."
      },
      {
        "number": "13",
        "name": "GD",
        "type": "output",
        "description": "Gate driver output with 600mA source and 800mA sink peak current capability for driving power MOSFETs and IGBTs; output voltage clamped to approximately 12V."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage for IC logic and gate driver stages; operating range 10.3 to 22V with turn-on at 11 to 13V, turn-off at 8.7 to 10.3V, and Zener clamp at 22 to 25V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 39,
        "cost_usd": 0.3919,
        "at": "2026-09-23T12:21:29"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590918754861993984",
        "pages": 39,
        "sha256": "867a46c1733f77b9",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "l6563atr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b9a775da256c8afcc28dcddfbc2eb3f266107fe61ce8446d96f2c52b6f44a70",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "l6563atr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          8.7,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "9fb08ec13c8412bf05f68683d39bea515bc6e5b083471fe9da7bcecd7209ae4e",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}