main
Ray
Initial commit: component/l6561
866f170
L6561
STMicroelectronics · AC-DC Controllers And Regulators · DIP-8
L6561 from STMicroelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INV | input | Inverting input of the error amplifier; a resistive divider is connected between the output regulated voltage and this point to provide voltage feedback. |
| 2 | COMP | output | Output of error amplifier; a feedback compensation network is placed between this pin and the INV pin. |
| 3 | MULT | input | Input of the multiplier stage; a resistive divider connects to this pin the rectified mains and a voltage signal proportional to the rectified mains appears on this pin. |
| 4 | CS | input | Input to the comparator of the control loop; the current is sensed by a resistor and the resulting voltage is applied to this pin. |
| 5 | ZCD | input | Zero current detection input; if it is connected to GND, the device is disabled. |
| 6 | GND | power_in | Current return for driver and control circuits. |
| 7 | GD | output | Gate driver output; a push pull output stage is able to drive the Power MOS with peak current of 400mA (source and sink). |
| 8 | VCC | power_in | Supply voltage of driver and control circuits; operating range 11V to 18V per electrical characteristics. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
L6561 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
l6561-etched.step/l6561-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6561.step/l6561.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (13 pp, sha256
2be94714d796d4fb, retrieved 2026-09-24, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# L6561
**STMicroelectronics** · AC-DC Controllers And Regulators · DIP-8
L6561 from STMicroelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INV | input | Inverting input of the error amplifier; a resistive divider is connected between the output regulated voltage and this point to provide voltage feedback. |
| 2 | COMP | output | Output of error amplifier; a feedback compensation network is placed between this pin and the INV pin. |
| 3 | MULT | input | Input of the multiplier stage; a resistive divider connects to this pin the rectified mains and a voltage signal proportional to the rectified mains appears on this pin. |
| 4 | CS | input | Input to the comparator of the control loop; the current is sensed by a resistor and the resulting voltage is applied to this pin. |
| 5 | ZCD | input | Zero current detection input; if it is connected to GND, the device is disabled. |
| 6 | GND | power_in | Current return for driver and control circuits. |
| 7 | GD | output | Gate driver output; a push pull output stage is able to drive the Power MOS with peak current of 400mA (source and sink). |
| 8 | VCC | power_in | Supply voltage of driver and control circuits; operating range 11V to 18V per electrical characteristics. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `L6561`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `l6561-etched.step` / `l6561-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6561.step` / `l6561.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588911747818668032) (13 pp, sha256 `2be94714d796d4fb`, retrieved 2026-09-24, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/l6561-datasheet.pdf)