main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs l6561: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers l6561: viewers · Ray
l6561-etched.fit.json l6561: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
l6561-etched.glb l6561: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
l6561-etched.step l6561: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
l6561.glb Publish 0.1.0 · Ray
l6561.kicad_mod Publish 0.1.0 · Ray
l6561.kicad_sym Publish 0.1.0 · Ray
l6561.lbr Publish 0.1.0 · Ray
l6561.step Publish 0.1.0 · Ray
package.json l6561: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json l6561: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/l6561 · Ray

L6561

STMicroelectronics · AC-DC Controllers And Regulators · DIP-8

L6561 from STMicroelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 INV input Inverting input of the error amplifier; a resistive divider is connected between the output regulated voltage and this point to provide voltage feedback.
2 COMP output Output of error amplifier; a feedback compensation network is placed between this pin and the INV pin.
3 MULT input Input of the multiplier stage; a resistive divider connects to this pin the rectified mains and a voltage signal proportional to the rectified mains appears on this pin.
4 CS input Input to the comparator of the control loop; the current is sensed by a resistor and the resulting voltage is applied to this pin.
5 ZCD input Zero current detection input; if it is connected to GND, the device is disabled.
6 GND power_in Current return for driver and control circuits.
7 GD output Gate driver output; a push pull output stage is able to drive the Power MOS with peak current of 400mA (source and sink).
8 VCC power_in Supply voltage of driver and control circuits; operating range 11V to 18V per electrical characteristics.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DIP-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: L6561
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: l6561-etched.step / l6561-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l6561.step / l6561.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (13 pp, sha256 2be94714d796d4fb, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF