component
L6398DTR
Public Made by Adomby adom
STMicroelectronics Gate Drivers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
L6398DTR
STMicroelectronics · Gate Drivers · SO-8
L6398DTR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LIN | input | Low-side driver logic input, active low; the datasheet gives VIL of 0.8 V (min) to 1.1 V and VIH of 1.9 V to 2.25 V, with CMOS/TTL compatibility down to 3.3 V. |
| 2 | HIN | input | High-side driver logic input, active high; the datasheet gives VIL of 0.8 V (min) to 1.1 V and VIH of 1.9 V to 2.25 V, with CMOS/TTL compatibility down to 3.3 V. |
| 3 | VCC | power_in | Lower section supply voltage, recommended operating range 10 V to 20 V with an absolute maximum of 21 V. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | LVG | output | Low-side driver output; the circuit guarantees less than 1 V on LVG at Isink = 10 mA with VCC > 3 V, so an external gate-to-source bleeder resistor can be omitted. |
| 6 | OUT | power_in | High-side (floating) common voltage, recommended range up to 580 V with an absolute range of VBOOT - 21 V to VBOOT + 0.3 V. |
| 7 | HVG | output | High-side driver output referenced to OUT; the circuit guarantees less than 1 V on HVG at Isink = 10 mA with VCC > 3 V, so an external gate-to-source bleeder resistor can be omitted. |
| 8 | BOOT | power_in | Bootstrapped supply voltage for the high-side section, recommended floating supply 9.8 V to 20 V, with an absolute maximum VBOOT of 620 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
L6398DTR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
l6398dtr-etched.step/l6398dtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6398dtr.step/l6398dtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (16 pp, sha256
1d82c19ce841bdb0, retrieved 2026-10-08, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# L6398DTR
**STMicroelectronics** · Gate Drivers · SO-8
L6398DTR from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LIN | input | Low-side driver logic input, active low; the datasheet gives VIL of 0.8 V (min) to 1.1 V and VIH of 1.9 V to 2.25 V, with CMOS/TTL compatibility down to 3.3 V. |
| 2 | HIN | input | High-side driver logic input, active high; the datasheet gives VIL of 0.8 V (min) to 1.1 V and VIH of 1.9 V to 2.25 V, with CMOS/TTL compatibility down to 3.3 V. |
| 3 | VCC | power_in | Lower section supply voltage, recommended operating range 10 V to 20 V with an absolute maximum of 21 V. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | LVG | output | Low-side driver output; the circuit guarantees less than 1 V on LVG at Isink = 10 mA with VCC > 3 V, so an external gate-to-source bleeder resistor can be omitted. |
| 6 | OUT | power_in | High-side (floating) common voltage, recommended range up to 580 V with an absolute range of VBOOT - 21 V to VBOOT + 0.3 V. |
| 7 | HVG | output | High-side driver output referenced to OUT; the circuit guarantees less than 1 V on HVG at Isink = 10 mA with VCC > 3 V, so an external gate-to-source bleeder resistor can be omitted. |
| 8 | BOOT | power_in | Bootstrapped supply voltage for the high-side section, recommended floating supply 9.8 V to 20 V, with an absolute maximum VBOOT of 620 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `L6398DTR`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `l6398dtr-etched.step` / `l6398dtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l6398dtr.step` / `l6398dtr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588939830516994048) (16 pp, sha256 `1d82c19ce841bdb0`, retrieved 2026-10-08, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/l6398dtr-datasheet.pdf)