main
Ray
Publish 0.1.0
6f8c4b1
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334
{
"slug": "l6205d013tr",
"version": "0.1.0",
"type": "component",
"description": "STMicroelectronics Motor Driver ICs, SO-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power management ics",
"l6205d013tr",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"l6205d013tr.kicad_sym",
"l6205d013tr.kicad_mod",
"l6205d013tr.glb",
"l6205d013tr.step",
"l6205d013tr.lbr",
"docs/hero.png",
"docs/l6205d013tr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"l6205d013tr-hero.glb",
"l6205d013tr-hero.overlay.json"
],
"component": {
"mpn": "L6205D013TR",
"manufacturer": "STMicroelectronics",
"package": "SO-20-300mil",
"pin_count": 21,
"category": "Power Management ICs",
"subcategory": "Motor Driver ICs",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/975b5ed239b3c923c9c5330651f0fb4a.pdf",
"parts": {
"symbol": "l6205d013tr.kicad_sym",
"footprint": "l6205d013tr.kicad_mod",
"model_3d": "l6205d013tr-hero.glb",
"model_3d_plain": "l6205d013tr.glb",
"model_3d_step": "l6205d013tr-etched.step",
"model_3d_step_plain": "l6205d013tr.step",
"lbr": "l6205d013tr.lbr"
},
"distributor_links": {
"lcsc": "C962257",
"digikey": "497-3998-2-ND",
"mouser": "511-L6205D013TR"
},
"distributor_check": {
"checked_at": "2026-11-13T06:53:42Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-3998-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "511-L6205D013TR",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "IN1A",
"type": "input",
"description": "Bridge A logic input 1 is TTL/CMOS and µC compatible, with a typical turn-on threshold of 1.8 V and turn-off threshold of 1.3 V."
},
{
"number": "2",
"name": "IN2A",
"type": "input",
"description": "Bridge A logic input 2 is TTL/CMOS and µC compatible, with a typical turn-on threshold of 1.8 V and turn-off threshold of 1.3 V."
},
{
"number": "3",
"name": "SENSEA",
"type": "power_in",
"description": "Bridge A source pin must be connected to power ground directly or through a sensing power resistor."
},
{
"number": "4",
"name": "OUT1A",
"type": "power_out",
"description": "Bridge A power output 1 of the half bridge."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Signal ground terminal, also used for heat dissipation toward the PCB in the SO package."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "Signal ground terminal, also used for heat dissipation toward the PCB in the SO package."
},
{
"number": "7",
"name": "OUT1B",
"type": "power_out",
"description": "Bridge B power output 1 of the half bridge."
},
{
"number": "8",
"name": "SENSEB",
"type": "power_in",
"description": "Bridge B source pin must be connected to power ground directly or through a sensing power resistor."
},
{
"number": "9",
"name": "IN1B",
"type": "input",
"description": "Bridge B logic input 1 is TTL/CMOS and µC compatible, with a typical turn-on threshold of 1.8 V and turn-off threshold of 1.3 V."
},
{
"number": "10",
"name": "IN2B",
"type": "input",
"description": "Bridge B logic input 2 is TTL/CMOS and µC compatible, with a typical turn-on threshold of 1.8 V and turn-off threshold of 1.3 V."
},
{
"number": "11",
"name": "ENB",
"type": "input",
"description": "Bridge B enable: a LOW logic level switches off all power MOSFETs of bridge B, and the pin is also tied to the overcurrent/thermal protection transistor collector; if unused it must be connected to +5 V through a resistor, with 2.2 kΩ to 180 kΩ recommended (100 kΩ typical)."
},
{
"number": "12",
"name": "VBOOT",
"type": "power_out",
"description": "Bootstrap voltage for driving the upper power MOSFETs of both bridges, with an absolute maximum of VS + 10 V."
},
{
"number": "13",
"name": "OUT2B",
"type": "power_out",
"description": "Bridge B power output 2 of the half bridge."
},
{
"number": "14",
"name": "VSB",
"type": "power_in",
"description": "Bridge B power supply, which must be connected to the supply voltage together with VSA; operating supply range is 8 V to 52 V."
},
{
"number": "15",
"name": "GND",
"type": "power_in",
"description": "Signal ground terminal, also used for heat dissipation toward the PCB in the SO package."
},
{
"number": "16",
"name": "GND",
"type": "power_in",
"description": "Signal ground terminal, also used for heat dissipation toward the PCB in the SO package."
},
{
"number": "17",
"name": "VSA",
"type": "power_in",
"description": "Bridge A power supply, which must be connected to the supply voltage together with VSB; operating supply range is 8 V to 52 V."
},
{
"number": "18",
"name": "OUT2A",
"type": "power_out",
"description": "Bridge A power output 2 of the half bridge."
},
{
"number": "19",
"name": "VCP",
"type": "output",
"description": "Charge pump oscillator output, a square wave of about 600 kHz typical with 10 V amplitude."
},
{
"number": "20",
"name": "ENA",
"type": "input",
"description": "Bridge A enable: a LOW logic level switches off all power MOSFETs of bridge A, and the pin is also tied to the overcurrent/thermal protection transistor collector; if unused it must be connected to +5 V through a resistor, with 2.2 kΩ to 180 kΩ recommended (100 kΩ typical)."
},
{
"number": "21",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet gives the SO20 package as 'SO20 (16+2+2)' with ordering code L6205D; it never prints '; Pin types are KiCad-class judgements. SENSEA/SENSEB are typed power_in because the datasheet lists t; Pins 5, 6, 15 and 16 share one row in the datasheet pin table (page 4). They are listed individually",
"exposed pad 21 added from the footprint",
"1/21 pins cited to the wrong page (name found elsewhere): ['19:VCP@p8']"
],
"pages_sent": 21,
"cost_usd": 0.1112,
"at": "2026-11-13T06:53:20"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/975b5ed239b3c923c9c5330651f0fb4a.pdf",
"pages": 21,
"sha256": "7c56e39dd8d3a140",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "SOIC",
"height_mm": 2.5,
"height_basis": "datasheet A, midpoint of min and max",
"standoff_mm": 0.15,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.36,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 1.27 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.2,
"lead_thickness_basis": "default for pitch 1.27 mm, height 2.5 mm (no datasheet c read)"
},
"pins": {
"total": 21,
"described": 21,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "l6205d013tr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.325,
12.8,
2.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "bc03b955bdbabb9b2facc818f52b69c94917ce655afd6bc30e97922c45bf4ed0",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "l6205d013tr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
10.325,
12.8,
2.5
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "caef24a180aef43215f562916a84a78660b32c8fd9a4675e99f242d70e6025c6",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SO20",
"source_page": 20,
"D": {
"nom_mm": 12.8,
"range_mm": [
12.6,
13.0
]
},
"E1": {
"nom_mm": 7.5,
"range_mm": [
7.4,
7.6
]
},
"E": {
"nom_mm": 10.325,
"range_mm": [
10.0,
10.65
]
},
"e": {
"nom_mm": 1.27,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.5,
"range_mm": [
2.35,
2.65
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "l6205d013tr.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}