main
History Download
Ray Publish 0.1.0 cdb1e2a

L6201013TR

STMicroelectronics · Gate Drive ICs · SO-20-300mil

L6201013TR from STMicroelectronics, in a SO-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SENSE passive A sense resistor Rsense connected to this pin provides feedback for motor current control, with Vsense rated from -1 V to +4 V.
2 ENABLE input A logic high on this pin enables the DMOS power transistors to be driven by IN1 and IN2; logic low turns all transistors off, with input low max 0.8 V and input high min 2 V (absolute max 7 V).
3 N.C. unconnected Not connected.
4 GND power_in Common ground terminal.
5 GND power_in Common ground terminal.
6 GND power_in Common ground terminal.
7 GND power_in Common ground terminal.
8 N.C. unconnected Not connected.
9 OUT2 output Output of the second half bridge; the differential output voltage between OUT1 and OUT2 is rated 60 V max.
10 VS power_in Power supply voltage, rated 12 V min, 36 V typ and 48 V max in the electrical characteristics (absolute maximum 52 V).
11 OUT1 output Output of the first half bridge; the differential output voltage between OUT1 and OUT2 is rated 60 V max.
12 BOOT1 passive A bootstrap capacitor connected to this pin ensures efficient driving of the upper power DMOS transistor; at least 10 nF is recommended, and the absolute maximum bootstrap peak voltage is 60 V.
13 IN1 input Digital TTL/CMOS/µC-compatible logic input from the motor controller that controls the first half bridge; input low max 0.8 V, input high min 2 V, absolute max 7 V.
14 GND power_in Common ground terminal.
15 GND power_in Common ground terminal.
16 GND power_in Common ground terminal.
17 GND power_in Common ground terminal.
18 IN2 input Digital TTL/CMOS/µC-compatible logic input from the motor controller that controls the second half bridge; input low max 0.8 V, input high min 2 V, absolute max 7 V.
19 BOOT2 passive A bootstrap capacitor connected to this pin ensures efficient driving of the upper power DMOS transistor; at least 10 nF is recommended, and the absolute maximum bootstrap peak voltage is 60 V.
20 Vref power_out Internal voltage reference (13.5 V typ at 2 mA); a capacitor to GND is recommended (0.22 µF typical), and it can source at most 2 mA.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SO-20-300mil
Category Power Management ICs
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage Vs (absolute maximum) Vs 52 V 3
Differential output voltage (Out1 to Out2) VOD 60 V 3
Input or enable voltage VIN, VEN -0.3 7 V 3
Sensing voltage Vsense -1 4 V 3
Bootstrap peak voltage Vb 60 V 3
Total power dissipation Ptot 4 W Tpins = 90°C 3
Total power dissipation Ptot 0.9 W Tamb = 70°C (Note 2, mounted on board with minimized dissipating copper area) 3
Storage and junction temperature Tstg, Tj -40 150 °C 3
Thermal resistance junction-pins Rth j-pins 15 °C/W 4
Supply voltage Vs 12 36 48 V 4
Reference current output IREF 2 mA Output current of Vref pin (max current stated in pin description) 4
Quiescent supply current Is 10 15 mA EN = H, VIN = L 4
Quiescent supply current Is 8 15 mA EN = L (Fig. 1,2,3), IL = 0 4
Commutation frequency fc 30 100 KHz Limited by power dissipation (*) 4
Drain-source on resistance RDS On 0.3 0.55 Ω Fig. 4,5 4
Drain-source voltage on (VDS(ON)) VDS(ON) 0.3 V IDS = 1A, Fig. 9 (L6201) 4
Sensing voltage Vsens -1 4 V 4
Input low voltage VIN L, VEN L -0.3 0.8 V 4
Input high voltage VIN H, VEN H 2 7 V 4
Thermal shutdown Tj 150 °C 4
Dead time protection Td 100 ns 4
Reference voltage Vref 13.5 V IREF = 2mA 4
Leakage current (OFF) IDSS 1 mA Fig. 11, Vs = 52 V 4
Source-drain forward ON voltage Vsd 0.9 V ISD = 1A, EN = L (L6201), Fig. 6a and b 4
Reverse recovery time trr 300 ns IF = 1A, dif/dt = 25 A/µs (L6201) 4
Forward recovery time tfr 200 ns 4
Input low current IIN L, IEN L -10 µA VIN, VEN = L 4
Input high current IIN H, IEN H 30 µA VIN, VEN = H 4
Source current turn-off delay t1 (Vi) 300 ns Fig. 12 5
Source current fall time t2 (Vi) 200 ns Fig. 12 5
Source current turn-on delay t3 (Vi) 400 ns Fig. 12 5
Source current rise time t4 (Vi) 200 ns Fig. 12 5
Sink current turn-off delay t5 (Vi) 300 ns Fig. 13 5
Sink current fall time t6 (Vi) 200 ns Fig. 13 5
Sink current turn-on delay t7 (Vi) 400 ns Fig. 13 5
Sink current rise time t8 (Vi) 200 ns Fig. 13 5

CAD (KiCad official)

  • Symbol: L6201013TR
  • Footprint: Package_SO:SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm
  • 3D model: SO-20-300mil, generated on the KiCad land (body 7.5 x 12.8 mm, terminals on the pads, 2.5 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: l6201013tr-etched.step / l6201013tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l6201013tr.step / l6201013tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (20 pp, sha256 b81a1fa489f48c0e, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF