component
L6201013TR
Public Made by Adomby adom
STMicroelectronics Gate Drive ICs, SO-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownL6201013TR
STMicroelectronics · Gate Drive ICs · SO-20-300mil
L6201013TR from STMicroelectronics, in a SO-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SENSE | passive | A sense resistor Rsense connected to this pin provides feedback for motor current control, with Vsense rated from -1 V to +4 V. |
| 2 | ENABLE | input | A logic high on this pin enables the DMOS power transistors to be driven by IN1 and IN2; logic low turns all transistors off, with input low max 0.8 V and input high min 2 V (absolute max 7 V). |
| 3 | N.C. | unconnected | Not connected. |
| 4 | GND | power_in | Common ground terminal. |
| 5 | GND | power_in | Common ground terminal. |
| 6 | GND | power_in | Common ground terminal. |
| 7 | GND | power_in | Common ground terminal. |
| 8 | N.C. | unconnected | Not connected. |
| 9 | OUT2 | output | Output of the second half bridge; the differential output voltage between OUT1 and OUT2 is rated 60 V max. |
| 10 | VS | power_in | Power supply voltage, rated 12 V min, 36 V typ and 48 V max in the electrical characteristics (absolute maximum 52 V). |
| 11 | OUT1 | output | Output of the first half bridge; the differential output voltage between OUT1 and OUT2 is rated 60 V max. |
| 12 | BOOT1 | passive | A bootstrap capacitor connected to this pin ensures efficient driving of the upper power DMOS transistor; at least 10 nF is recommended, and the absolute maximum bootstrap peak voltage is 60 V. |
| 13 | IN1 | input | Digital TTL/CMOS/µC-compatible logic input from the motor controller that controls the first half bridge; input low max 0.8 V, input high min 2 V, absolute max 7 V. |
| 14 | GND | power_in | Common ground terminal. |
| 15 | GND | power_in | Common ground terminal. |
| 16 | GND | power_in | Common ground terminal. |
| 17 | GND | power_in | Common ground terminal. |
| 18 | IN2 | input | Digital TTL/CMOS/µC-compatible logic input from the motor controller that controls the second half bridge; input low max 0.8 V, input high min 2 V, absolute max 7 V. |
| 19 | BOOT2 | passive | A bootstrap capacitor connected to this pin ensures efficient driving of the upper power DMOS transistor; at least 10 nF is recommended, and the absolute maximum bootstrap peak voltage is 60 V. |
| 20 | Vref | power_out | Internal voltage reference (13.5 V typ at 2 mA); a capacitor to GND is recommended (0.22 µF typical), and it can source at most 2 mA. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-20-300mil |
| Category | Power Management ICs |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage Vs (absolute maximum) | Vs | 52 | V | 3 | |||
| Differential output voltage (Out1 to Out2) | VOD | 60 | V | 3 | |||
| Input or enable voltage | VIN, VEN | -0.3 | 7 | V | 3 | ||
| Sensing voltage | Vsense | -1 | 4 | V | 3 | ||
| Bootstrap peak voltage | Vb | 60 | V | 3 | |||
| Total power dissipation | Ptot | 4 | W | Tpins = 90°C | 3 | ||
| Total power dissipation | Ptot | 0.9 | W | Tamb = 70°C (Note 2, mounted on board with minimized dissipating copper area) | 3 | ||
| Storage and junction temperature | Tstg, Tj | -40 | 150 | °C | 3 | ||
| Thermal resistance junction-pins | Rth j-pins | 15 | °C/W | 4 | |||
| Supply voltage | Vs | 12 | 36 | 48 | V | 4 | |
| Reference current output | IREF | 2 | mA | Output current of Vref pin (max current stated in pin description) | 4 | ||
| Quiescent supply current | Is | 10 | 15 | mA | EN = H, VIN = L | 4 | |
| Quiescent supply current | Is | 8 | 15 | mA | EN = L (Fig. 1,2,3), IL = 0 | 4 | |
| Commutation frequency | fc | 30 | 100 | KHz | Limited by power dissipation (*) | 4 | |
| Drain-source on resistance | RDS On | 0.3 | 0.55 | Ω | Fig. 4,5 | 4 | |
| Drain-source voltage on (VDS(ON)) | VDS(ON) | 0.3 | V | IDS = 1A, Fig. 9 (L6201) | 4 | ||
| Sensing voltage | Vsens | -1 | 4 | V | 4 | ||
| Input low voltage | VIN L, VEN L | -0.3 | 0.8 | V | 4 | ||
| Input high voltage | VIN H, VEN H | 2 | 7 | V | 4 | ||
| Thermal shutdown | Tj | 150 | °C | 4 | |||
| Dead time protection | Td | 100 | ns | 4 | |||
| Reference voltage | Vref | 13.5 | V | IREF = 2mA | 4 | ||
| Leakage current (OFF) | IDSS | 1 | mA | Fig. 11, Vs = 52 V | 4 | ||
| Source-drain forward ON voltage | Vsd | 0.9 | V | ISD = 1A, EN = L (L6201), Fig. 6a and b | 4 | ||
| Reverse recovery time | trr | 300 | ns | IF = 1A, dif/dt = 25 A/µs (L6201) | 4 | ||
| Forward recovery time | tfr | 200 | ns | 4 | |||
| Input low current | IIN L, IEN L | -10 | µA | VIN, VEN = L | 4 | ||
| Input high current | IIN H, IEN H | 30 | µA | VIN, VEN = H | 4 | ||
| Source current turn-off delay | t1 (Vi) | 300 | ns | Fig. 12 | 5 | ||
| Source current fall time | t2 (Vi) | 200 | ns | Fig. 12 | 5 | ||
| Source current turn-on delay | t3 (Vi) | 400 | ns | Fig. 12 | 5 | ||
| Source current rise time | t4 (Vi) | 200 | ns | Fig. 12 | 5 | ||
| Sink current turn-off delay | t5 (Vi) | 300 | ns | Fig. 13 | 5 | ||
| Sink current fall time | t6 (Vi) | 200 | ns | Fig. 13 | 5 | ||
| Sink current turn-on delay | t7 (Vi) | 400 | ns | Fig. 13 | 5 | ||
| Sink current rise time | t8 (Vi) | 200 | ns | Fig. 13 | 5 |
CAD (KiCad official)
- Symbol:
L6201013TR - Footprint:
Package_SO:SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm - 3D model: SO-20-300mil, generated on the KiCad land (body 7.5 x 12.8 mm, terminals on the pads, 2.5 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
l6201013tr-etched.step/l6201013tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6201013tr.step/l6201013tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (20 pp, sha256
b81a1fa489f48c0e, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).