main
Ray
Initial commit: component/l4978
7bfb029
L4978
STMicroelectronics · DC-DC Converters · DIP-8
L4978 from STMicroelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | SS_INH | input | Active-low logic input that disables the device (sleep mode) when grounded (driven by open collector/drain); a capacitor to ground sets the soft start time. |
| 3 | OSC | passive | An external resistor from the unregulated input voltage and a capacitor to ground set the switching frequency (line feed forward obtained automatically), up to 300kHz. |
| 4 | OUT | output | Step-down regulator output (switch node of the internal power D-MOS). |
| 5 | VCC | power_in | Unregulated DC input voltage, operating range 8V to 55V (absolute maximum 58V). |
| 6 | BOOT | passive | A capacitor connected between this pin and OUT drives the internal DMOS transistor; maximum bootstrap voltage 70V. |
| 7 | COMP | output | Error amplifier output used for frequency compensation. |
| 8 | FB | input | Step-down feedback input; connecting directly gives 3.3V output, an external resistive divider is required for higher output voltages. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
L4978 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
l4978-etched.step/l4978-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l4978.step/l4978.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (13 pp, sha256
12d64e9c104d08a2, retrieved 2026-10-01, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# L4978
**STMicroelectronics** · DC-DC Converters · DIP-8
L4978 from STMicroelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | SS_INH | input | Active-low logic input that disables the device (sleep mode) when grounded (driven by open collector/drain); a capacitor to ground sets the soft start time. |
| 3 | OSC | passive | An external resistor from the unregulated input voltage and a capacitor to ground set the switching frequency (line feed forward obtained automatically), up to 300kHz. |
| 4 | OUT | output | Step-down regulator output (switch node of the internal power D-MOS). |
| 5 | VCC | power_in | Unregulated DC input voltage, operating range 8V to 55V (absolute maximum 58V). |
| 6 | BOOT | passive | A capacitor connected between this pin and OUT drives the internal DMOS transistor; maximum bootstrap voltage 70V. |
| 7 | COMP | output | Error amplifier output used for frequency compensation. |
| 8 | FB | input | Step-down feedback input; connecting directly gives 3.3V output, an external resistive divider is required for higher output voltages. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## CAD (KiCad official)
- Symbol: `L4978`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files: `l4978-etched.step` / `l4978-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `l4978.step` / `l4978.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/l4978.pdf) (13 pp, sha256 `12d64e9c104d08a2`, retrieved 2026-10-01, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/l4978-datasheet.pdf)