main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs l4978: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers l4978: viewers · Ray
l4978-etched.fit.json l4978: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
l4978-etched.glb l4978: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
l4978-etched.step l4978: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
l4978-hero.glb l4978: hero from the plain model · Ray
l4978-hero.overlay.json l4978: hero from the plain model · Ray
l4978.glb Publish 0.1.0 · Ray
l4978.kicad_mod Publish 0.1.0 · Ray
l4978.kicad_sym Publish 0.1.0 · Ray
l4978.lbr Publish 0.1.0 · Ray
l4978.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/l4978 · Ray

L4978

STMicroelectronics · DC-DC Converters · DIP-8

L4978 from STMicroelectronics, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground.
2 SS_INH input Active-low logic input that disables the device (sleep mode) when grounded (driven by open collector/drain); a capacitor to ground sets the soft start time.
3 OSC passive An external resistor from the unregulated input voltage and a capacitor to ground set the switching frequency (line feed forward obtained automatically), up to 300kHz.
4 OUT output Step-down regulator output (switch node of the internal power D-MOS).
5 VCC power_in Unregulated DC input voltage, operating range 8V to 55V (absolute maximum 58V).
6 BOOT passive A capacitor connected between this pin and OUT drives the internal DMOS transistor; maximum bootstrap voltage 70V.
7 COMP output Error amplifier output used for frequency compensation.
8 FB input Step-down feedback input; connecting directly gives 3.3V output, an external resistive divider is required for higher output voltages.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package DIP-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: L4978
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: l4978-etched.step / l4978-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); l4978.step / l4978.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (13 pp, sha256 12d64e9c104d08a2, retrieved 2026-10-01, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF