Generated by kicad-footprint-generator · KiCad file format 20260206
KUUESDA0402-05
KUU · Varistors · 0402
KUUESDA0402-05 from KUU, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | KUU |
| Package | 0402 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Max. working voltage DC | VWDC | 5 | V | 1 | |||
| Max. working voltage AC RMS | VWAC | 12.7 | V | 1 | |||
| Varistor voltage | VB | 31 | 38 | V | Measuring current 1mA DC; duration 0.2 to 2 sec | 1 | |
| Max. clamping voltage (8/20μs) | VC*1 | 58 | V | 8/20μs waveform | 1 | ||
| Max. clamping voltage (ESD) | VC*2 | 70 | V | ESD waveform | 1 | ||
| Leakage current | IL | 20 | μA | Measuring voltage: maximum DC working voltage | 1 | ||
| Rated single pulse transient energy | ET | 0.003 | J | 10/1000μs | 1 | ||
| Peak current | IP | 1 | A | 8/20μs | 1 | ||
| Operating and storage temperature range | -55 | 125 | ℃ | Individual chip without packing | 1 | ||
| Storage temperature range (packaging conditions) | -10 | 40 | ℃ | Packaging conditions, RH 70% (Max.) | 1 | ||
| Varistor voltage change after resistance to soldering heat | VB | -10 | 10 | % | Solder temperature 260±3℃; duration 5 sec | 3 | |
| Varistor voltage change after thermal shock | VB | -10 | 10 | % | -55℃ for 30±3 min to 125℃ for 30±3 min; 100 cycles | 3 | |
| Varistor voltage change after resistance to low temperature | VB | -10 | 10 | % | Temperature -55±2℃; duration 1000+24 hours | 3 | |
| Varistor voltage change after resistance to high temperature | VB | -10 | 10 | % | Temperature 125±2℃; duration 1000+24 hours | 3 | |
| Varistor voltage change after damp heat (steady state) | VB | -10 | 10 | % | Temperature 60±2℃; humidity 90% to 95% RH; duration 1000+24 hours | 3 | |
| Varistor voltage change after loading under damp heat | VB | -10 | 10 | % | Temperature 60±2℃; humidity 90% to 95% RH; duration 1000+24 hours; applied voltage DC working voltage | 4 | |
| Varistor voltage change after loading at high temperature (life test) | VB | -10 | 10 | % | Temperature 125±2℃; duration 1000+24 hours; applied voltage DC working voltage | 4 | |
| Varistor voltage change after maximum surge current | VB | -10 | 10 | % | IEC61000-4-5 8/20μs pulse at maximum surge current (IP); 1 hit each polarity | 4 | |
| Varistor voltage change after maximum surge energy | VB | -10 | 10 | % | IEC61000-4-5 10/1000μs current pulse at maximum surge energy (ET); 1 hit | 4 | |
| Varistor voltage change after ESD life | VB | -10 | 10 | % | IEC61000-4-2 contact discharge; voltage 8000V (Level 4); 10 times within 10 sec | 4 | |
| Varistor voltage change after ESD test | VB | -10 | 10 | % | IEC61000-4-2 air discharge; voltage 15000V (Special level); 10 times within 10 sec | 4 | |
| Maximum reflow peak temperature | 260 | ℃ | Reflow max temp | 5 | |||
| Maximum time at maximum reflow temperature | 10 | s | At max temp | 5 | |||
| Reflow preheat temperature | 150 | 200 | ℃ | Preheat condition 60~120 sec | 5 | ||
| Allowed time above 217℃ (reflow) | 60 | 90 | s | Above 217℃ | 5 | ||
| Maximum reflow ramp-up rate | 3 | ℃/s | Reflow profile | 5 | |||
| Maximum reflow ramp-down rate | 6 | ℃/s | Reflow profile | 5 | |||
| Time from 25℃ to peak (reflow) | 8 | min | Time 25℃ to peak | 5 | |||
| Maximum iron soldering tip temperature | 350 | ℃ | Iron soldering | 5 | |||
| Maximum iron soldering time | 3 | s | Iron soldering; max 1 time | 5 | |||
| Maximum iron soldering power | 30 | W | Iron soldering power | 5 | |||
| Typical capacitance | C | 3 | pF | Measured at 0.5 Vrms, 1MHz | 1 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | ③-1 Terminal electrode: Inside (Ag) ③-2 Outside (Electro-plating Ni-Sn) | 1 |
CAD (KiCad official)
- Symbol:
KUUESDA0402-05 - Footprint:
Resistor_SMD:R_0402_1005Metric - 3D model: 0402 (KiCad packages3D, STEP)
- 3D model files:
kuuesda0402-05-etched.step/kuuesda0402-05-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);kuuesda0402-05.step/kuuesda0402-05.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: KUU datasheet (5 pp, sha256
386a33c75272840b, retrieved 2026-11-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).