Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

KUUESDA0402-05

KUU · Varistors · 0402

KUUESDA0402-05 from KUU, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised resistor; either orientation.
2 2 passive Terminal 2 of an unpolarised resistor; either orientation.

Key specifications

Parameter Value
Manufacturer KUU
Package 0402
Category Circuit Protection
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Max. working voltage DC VWDC 5 V 1
Max. working voltage AC RMS VWAC 12.7 V 1
Varistor voltage VB 31 38 V Measuring current 1mA DC; duration 0.2 to 2 sec 1
Max. clamping voltage (8/20μs) VC*1 58 V 8/20μs waveform 1
Max. clamping voltage (ESD) VC*2 70 V ESD waveform 1
Leakage current IL 20 μA Measuring voltage: maximum DC working voltage 1
Rated single pulse transient energy ET 0.003 J 10/1000μs 1
Peak current IP 1 A 8/20μs 1
Operating and storage temperature range -55 125 ℃ Individual chip without packing 1
Storage temperature range (packaging conditions) -10 40 ℃ Packaging conditions, RH 70% (Max.) 1
Varistor voltage change after resistance to soldering heat VB -10 10 % Solder temperature 260±3℃; duration 5 sec 3
Varistor voltage change after thermal shock VB -10 10 % -55℃ for 30±3 min to 125℃ for 30±3 min; 100 cycles 3
Varistor voltage change after resistance to low temperature VB -10 10 % Temperature -55±2℃; duration 1000+24 hours 3
Varistor voltage change after resistance to high temperature VB -10 10 % Temperature 125±2℃; duration 1000+24 hours 3
Varistor voltage change after damp heat (steady state) VB -10 10 % Temperature 60±2℃; humidity 90% to 95% RH; duration 1000+24 hours 3
Varistor voltage change after loading under damp heat VB -10 10 % Temperature 60±2℃; humidity 90% to 95% RH; duration 1000+24 hours; applied voltage DC working voltage 4
Varistor voltage change after loading at high temperature (life test) VB -10 10 % Temperature 125±2℃; duration 1000+24 hours; applied voltage DC working voltage 4
Varistor voltage change after maximum surge current VB -10 10 % IEC61000-4-5 8/20μs pulse at maximum surge current (IP); 1 hit each polarity 4
Varistor voltage change after maximum surge energy VB -10 10 % IEC61000-4-5 10/1000μs current pulse at maximum surge energy (ET); 1 hit 4
Varistor voltage change after ESD life VB -10 10 % IEC61000-4-2 contact discharge; voltage 8000V (Level 4); 10 times within 10 sec 4
Varistor voltage change after ESD test VB -10 10 % IEC61000-4-2 air discharge; voltage 15000V (Special level); 10 times within 10 sec 4
Maximum reflow peak temperature 260 ℃ Reflow max temp 5
Maximum time at maximum reflow temperature 10 s At max temp 5
Reflow preheat temperature 150 200 ℃ Preheat condition 60~120 sec 5
Allowed time above 217℃ (reflow) 60 90 s Above 217℃ 5
Maximum reflow ramp-up rate 3 ℃/s Reflow profile 5
Maximum reflow ramp-down rate 6 ℃/s Reflow profile 5
Time from 25℃ to peak (reflow) 8 min Time 25℃ to peak 5
Maximum iron soldering tip temperature 350 ℃ Iron soldering 5
Maximum iron soldering time 3 s Iron soldering; max 1 time 5
Maximum iron soldering power 30 W Iron soldering power 5
Typical capacitance C 3 pF Measured at 0.5 Vrms, 1MHz 1

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin ③-1 Terminal electrode: Inside (Ag) ③-2 Outside (Electro-plating Ni-Sn) 1

CAD (KiCad official)

  • Symbol: KUUESDA0402-05
  • Footprint: Resistor_SMD:R_0402_1005Metric
  • 3D model: 0402 (KiCad packages3D, STEP)
  • 3D model files: kuuesda0402-05-etched.step / kuuesda0402-05-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); kuuesda0402-05.step / kuuesda0402-05.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: KUU datasheet (5 pp, sha256 386a33c75272840b, retrieved 2026-11-07, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF