main
Ray
Publish 0.1.0
e4c91b7
KTM1901TD-ST3
CONNTEK · Position Sensor · SOT-23-3L
KTM1901TD-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, operating range 1.8V to 5.5V (absolute max 6V); place a 100nF capacitor to GND as close to this pin as possible. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the field exceeds BOP and high when it falls below BRP; drive current max 5mA. |
| 3 | GND | power_in | Ground connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 1.8 | 5.5 | V | 工作状态 | 6 | |
| Output low voltage | VOL | 0.02 | 0.1 | V | IOUT=1mA | 6 | |
| Operate point south | BOPS | 6 | 9 | 14 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Release point south | BRPS | 3 | 6 | 9 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Operate point north | BOPN | -14 | -9 | -6 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Release point north | BRPN | -9 | -6 | -3 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Supply voltage (recommended) | VDD | 1.8 | 5.5 | V | 芯片工作 | 5 | |
| Operating temperature | TA | -40 | 125 | °C | 芯片工作 | 5 | |
| Supply voltage (abs max) | VDD | 6 | V | TA=+25℃ | 5 | ||
| Reverse supply voltage | VDD_REV | -0.3 | V | TA=+25℃ | 5 | ||
| Output drive current | IOUTPUT | 5 | mA | TA=+25℃ | 5 | ||
| Max withstand magnetic field | B | 3000 | Gauss | <5min | 5 | ||
| Package power dissipation | PD | 400 | mW | TA=+25℃ | 5 | ||
| Storage temperature | TSTG | -50 | 150 | °C | 5 | ||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Reflow temperature | T reflow | 260 | °C | 5 | |||
| ESD HBM | ESD | 8000 | V | 人体模型 | 5 | ||
| Average current | IDD(AVG) | 3.4 | μA | TA=+25℃, VDD=3.0V | 6 | ||
| Switching frequency | FS | 1000 | Hz | 工作状态 | 6 | ||
| Hysteresis | BHY | 3 | Gauss | (/BOPX/-/BRPX/) | 7 |
CAD (KiCad official)
- Symbol:
KTM1901TD-ST3 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
ktm1901td-st3-etched.step/ktm1901td-st3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ktm1901td-st3.step/ktm1901td-st3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CONNTEK datasheet (13 pp, sha256
0223649bda983df8, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KTM1901TD-ST3
**CONNTEK** · Position Sensor · SOT-23-3L
KTM1901TD-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply input, operating range 1.8V to 5.5V (absolute max 6V); place a 100nF capacitor to GND as close to this pin as possible. |
| 2 | OUTPUT | output | CMOS push-pull output that goes low when the field exceeds BOP and high when it falls below BRP; drive current max 5mA. |
| 3 | GND | power_in | Ground connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CONNTEK |
| Package | SOT-23-3L |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 1.8 | | 5.5 | V | 工作状态 | 6 |
| Output low voltage | VOL | | 0.02 | 0.1 | V | IOUT=1mA | 6 |
| Operate point south | BOPS | 6 | 9 | 14 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Release point south | BRPS | 3 | 6 | 9 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Operate point north | BOPN | -14 | -9 | -6 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Release point north | BRPN | -9 | -6 | -3 | Gauss | TA=+25℃, VDD=3.0V | 7 |
| Supply voltage (recommended) | VDD | 1.8 | | 5.5 | V | 芯片工作 | 5 |
| Operating temperature | TA | -40 | | 125 | °C | 芯片工作 | 5 |
| Supply voltage (abs max) | VDD | | | 6 | V | TA=+25℃ | 5 |
| Reverse supply voltage | VDD_REV | -0.3 | | | V | TA=+25℃ | 5 |
| Output drive current | IOUTPUT | | | 5 | mA | TA=+25℃ | 5 |
| Max withstand magnetic field | B | | | 3000 | Gauss | <5min | 5 |
| Package power dissipation | PD | | | 400 | mW | TA=+25℃ | 5 |
| Storage temperature | TSTG | -50 | | 150 | °C | | 5 |
| Junction temperature | TJ | | | 150 | °C | | 5 |
| Reflow temperature | T reflow | | | 260 | °C | | 5 |
| ESD HBM | ESD | | | 8000 | V | 人体模型 | 5 |
| Average current | IDD(AVG) | | 3.4 | | μA | TA=+25℃, VDD=3.0V | 6 |
| Switching frequency | FS | | 1000 | | Hz | 工作状态 | 6 |
| Hysteresis | BHY | | 3 | | Gauss | (/BOPX/-/BRPX/) | 7 |
## CAD (KiCad official)
- Symbol: `KTM1901TD-ST3`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `ktm1901td-st3-etched.step` / `ktm1901td-st3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ktm1901td-st3.step` / `ktm1901td-st3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [CONNTEK datasheet](docs/ktm1901td-st3-datasheet.pdf) (13 pp, sha256 `0223649bda983df8`, retrieved 2026-10-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ktm1901td-st3-datasheet.pdf)