Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

KTM1901TD-ST3

CONNTEK · Position Sensor · SOT-23-3L

KTM1901TD-ST3 from CONNTEK, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply input, operating range 1.8V to 5.5V (absolute max 6V); place a 100nF capacitor to GND as close to this pin as possible.
2 OUTPUT output CMOS push-pull output that goes low when the field exceeds BOP and high when it falls below BRP; drive current max 5mA.
3 GND power_in Ground connection.

Key specifications

Parameter Value
Manufacturer CONNTEK
Package SOT-23-3L
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 1.8 5.5 V 工作状态 6
Output low voltage VOL 0.02 0.1 V IOUT=1mA 6
Operate point south BOPS 6 9 14 Gauss TA=+25℃, VDD=3.0V 7
Release point south BRPS 3 6 9 Gauss TA=+25℃, VDD=3.0V 7
Operate point north BOPN -14 -9 -6 Gauss TA=+25℃, VDD=3.0V 7
Release point north BRPN -9 -6 -3 Gauss TA=+25℃, VDD=3.0V 7
Supply voltage (recommended) VDD 1.8 5.5 V 芯片工作 5
Operating temperature TA -40 125 °C 芯片工作 5
Supply voltage (abs max) VDD 6 V TA=+25℃ 5
Reverse supply voltage VDD_REV -0.3 V TA=+25℃ 5
Output drive current IOUTPUT 5 mA TA=+25℃ 5
Max withstand magnetic field B 3000 Gauss <5min 5
Package power dissipation PD 400 mW TA=+25℃ 5
Storage temperature TSTG -50 150 °C 5
Junction temperature TJ 150 °C 5
Reflow temperature T reflow 260 °C 5
ESD HBM ESD 8000 V 人体模型 5
Average current IDD(AVG) 3.4 μA TA=+25℃, VDD=3.0V 6
Switching frequency FS 1000 Hz 工作状态 6
Hysteresis BHY 3 Gauss (/BOPX/-/BRPX/) 7

CAD (KiCad official)

  • Symbol: KTM1901TD-ST3
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3L (KiCad packages3D, STEP)
  • 3D model files: ktm1901td-st3-etched.step / ktm1901td-st3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ktm1901td-st3.step / ktm1901td-st3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: CONNTEK datasheet (13 pp, sha256 0223649bda983df8, retrieved 2026-10-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF