main
Ray
Publish 0.1.0
2900072
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246
{
"slug": "kth5701aq2qns",
"version": "0.1.0",
"type": "component",
"description": "CONNTEK Hall Sensor, QFN-16L(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"kth5701aq2qns",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"kth5701aq2qns.kicad_sym",
"kth5701aq2qns.kicad_mod",
"kth5701aq2qns.glb",
"kth5701aq2qns.step",
"kth5701aq2qns.lbr",
"docs/hero.png",
"docs/kth5701aq2qns-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"kth5701aq2qns-hero.glb",
"kth5701aq2qns-hero.overlay.json",
"kth5701aq2qns-etched.glb"
],
"component": {
"mpn": "KTH5701AQ2QNS",
"manufacturer": "CONNTEK",
"package": "QFN-16L(3x3)",
"pin_count": 17,
"category": "Sensors",
"subcategory": "Hall Sensor",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d5580cb2ac6543e4b42ddde9db1f7a7d.pdf",
"parts": {
"symbol": "kth5701aq2qns.kicad_sym",
"footprint": "kth5701aq2qns.kicad_mod",
"model_3d": "kth5701aq2qns-hero.glb",
"model_3d_plain": "kth5701aq2qns-etched.glb",
"model_3d_step": "kth5701aq2qns-etched.step",
"model_3d_step_plain": "kth5701aq2qns.step",
"lbr": "kth5701aq2qns.lbr"
},
"distributor_links": {
"lcsc": "C5380474"
},
"distributor_check": {
"checked_at": "2026-10-22T20:48:35Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "quota"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "INT",
"type": "output",
"description": "Data ready or wake-up & sleep mode interrupt output, set to 1 after a measurement completes or threshold change is exceeded and held until the measurement data is read back."
},
{
"number": "2",
"name": "CS",
"type": "input",
"description": "Chip select: pull up to VDD_IO in I2C mode, active-low and driven by the SPI master in SPI mode."
},
{
"number": "3",
"name": "SCL/SCLK",
"type": "input",
"description": "I2C or SPI clock input."
},
{
"number": "4",
"name": "NC",
"type": "unconnected",
"description": "Not connected; datasheet recommends grounding all NC pins."
},
{
"number": "5",
"name": "SDA/MOSI",
"type": "bidirectional",
"description": "I2C data input/output, or SPI data master-out slave-in."
},
{
"number": "6",
"name": "MISO",
"type": "output",
"description": "SPI data master-in slave-out; short MISO and MOSI when using only 3-wire SPI data transfer."
},
{
"number": "7",
"name": "BUTT_OUT/TRIG",
"type": "bidirectional",
"description": "Push-button function output or single-measurement trigger input; must be connected to ground when unused and must not float when used as trigger."
},
{
"number": "8",
"name": "VDD_IO",
"type": "power_in",
"description": "IO power supply, recommended 1.8 V to VDD."
},
{
"number": "9",
"name": "NC",
"type": "unconnected",
"description": "Not connected; datasheet recommends grounding all NC pins."
},
{
"number": "10",
"name": "NC",
"type": "unconnected",
"description": "Not connected; datasheet recommends grounding all NC pins."
},
{
"number": "11",
"name": "A1",
"type": "input",
"description": "I2C address input A1; must be connected to ground in SPI mode."
},
{
"number": "12",
"name": "A0",
"type": "input",
"description": "I2C address input A0; must be connected to ground in SPI mode."
},
{
"number": "13",
"name": "VSS",
"type": "power_in",
"description": "Ground."
},
{
"number": "14",
"name": "NC",
"type": "unconnected",
"description": "Not connected; datasheet recommends grounding all NC pins."
},
{
"number": "15",
"name": "VDD",
"type": "power_in",
"description": "Power supply, recommended 2.8 V to 5.5 V (3.3 V typical)."
},
{
"number": "16",
"name": "NC",
"type": "unconnected",
"description": "Not connected; datasheet recommends grounding all NC pins."
},
{
"number": "17",
"name": "EP",
"type": "passive",
"description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The pin table lists only pins 1,2,3,5,6,7,8,11,12,13,15 and says 'Other NC'. Pins 4, 9, 10, 14, 16 a; The text does not state whether the QFN has an exposed pad or how to connect it. The pin figure was ; The package suffix 'QN' and the 'QFN-16L(3x3)' hint were taken to mean QFN3x3-16L. The order informa"
],
"pages_sent": 10,
"cost_usd": 0.0798,
"at": "2026-10-22T20:47:42"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/d5580cb2ac6543e4b42ddde9db1f7a7d.pdf",
"pages": 52,
"sha256": "08677d632af50a8f",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 17,
"described": 17,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "kth5701aq2qns.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3eb81ffac423a66cdcfead8efe56401da171edaf1f2257049aad7b2d3900f6c8",
"checked": "2026-10-22",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "kth5701aq2qns-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3.0,
3.0,
0.785
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "89b936456cb26f7137d3f8eba69cac9af7ec7dd29042ca3bb77703dc577dc9b0",
"checked": "2026-10-22",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}