main
Ray
Publish 0.1.0
dbbb1f5
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239
{
"slug": "kth4621bat-st6",
"version": "0.1.0",
"type": "component",
"description": "CONNTEK Magnetic Angle Sensors, SOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"magnetic sensors",
"kth4621bat-st6",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"kth4621bat-st6.kicad_sym",
"kth4621bat-st6.kicad_mod",
"kth4621bat-st6.glb",
"kth4621bat-st6.step",
"kth4621bat-st6.lbr",
"docs/hero.png",
"docs/kth4621bat-st6-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"kth4621bat-st6-hero.glb",
"kth4621bat-st6-hero.overlay.json"
],
"component": {
"mpn": "KTH4621BAT-ST6",
"manufacturer": "CONNTEK",
"package": "SOT-23-6L",
"pin_count": 6,
"category": "Magnetic Sensors",
"subcategory": "Magnetic Angle Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b7555f6048994e13ea6b092ef3be0616.pdf",
"parts": {
"symbol": "kth4621bat-st6.kicad_sym",
"footprint": "kth4621bat-st6.kicad_mod",
"model_3d": "kth4621bat-st6-hero.glb",
"model_3d_plain": "kth4621bat-st6.glb",
"model_3d_step": "kth4621bat-st6-etched.step",
"model_3d_step_plain": "kth4621bat-st6.step",
"lbr": "kth4621bat-st6.lbr"
},
"distributor_links": {
"lcsc": "C25838712"
},
"distributor_check": {
"checked_at": "2026-11-13T02:16:22Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "no match"
},
"mouser": {
"pn": null,
"status": "no match"
}
},
"pins": [
{
"number": "1",
"name": "VDD",
"type": "power_in",
"description": "Supply pin, operating range 2.5 V to 5.5 V with respect to GND (absolute maximum VDD is 6 V); the datasheet recommends a 1 uF capacitor between VDD and GND placed close to the pin."
},
{
"number": "2",
"name": "TEST",
"type": "passive",
"description": "Test pin, which the datasheet pin table specifies must be connected to ground."
},
{
"number": "3",
"name": "NC",
"type": "unconnected",
"description": "Listed as NC in the name column, but the datasheet pin table specifies it must be connected to ground."
},
{
"number": "4",
"name": "OUT1",
"type": "output",
"description": "For KTH4621B this is the Z-axis latched switch output (NMOS open-drain); it goes low when the field exceeds BOP (25 Gs typ., 40 Gs max) and stays low, and goes high when the field drops below BRP (-25 Gs typ., -40 Gs min); output drive current is limited to 30 mA absolute maximum."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground reference for all voltages on the device (all absolute maximum voltages are referenced to GND)."
},
{
"number": "6",
"name": "OUT2",
"type": "output",
"description": "For KTH4621B this is the X-axis latched switch output (NMOS open-drain) with the same latched BOP/BRP switching behaviour as OUT1; output drive current is limited to 30 mA absolute maximum."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet pin table gives the function of TEST and NC only as '接地' (ground), so the ERC type 'pa; The datasheet describes the outputs as NMOS open-drain but does not map that to a KiCad ERC class; '; The pin table on page 3 is printed for the generic KTH462NXXX-ST6 family and lists per-variant outpu"
],
"pages_sent": 15,
"cost_usd": 0.0025,
"at": "2026-11-13T02:16:11"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/b7555f6048994e13ea6b092ef3be0616.pdf",
"pages": 15,
"sha256": "a3e3aabd858be7d4",
"source_tier": "lcsc"
},
"cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "SOT",
"height_mm": 1.165,
"height_basis": "datasheet A, midpoint of min and max",
"standoff_mm": 0.05,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.36,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.95 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.172,
"lead_thickness_basis": "default for pitch 0.95 mm, height 1.165 mm (no datasheet c read)"
},
"pins": {
"total": 6,
"described": 6,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "kth4621bat-st6.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.825,
2.92,
1.165
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f4305ce143ce050b028fac67b9e10b0fd7420aec941e3db69f774376eb976cb5",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "kth4621bat-st6-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.825,
2.92,
1.165
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "1d58260b10010d624f3ce596ba13c450de9892ed2f35ff51de4049ddb22a9d7f",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "SOT-23-6L",
"source_page": 15,
"D": {
"nom_mm": 2.92,
"range_mm": [
2.82,
3.02
]
},
"E1": {
"nom_mm": 1.61,
"range_mm": [
1.5,
1.72
]
},
"E": {
"nom_mm": 2.825,
"range_mm": [
2.65,
3.0
]
},
"e": {
"nom_mm": 0.95,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.165,
"range_mm": [
1.05,
1.28
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "kth4621bat-st6.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}