main
History Download
Ray Publish 0.1.0 d7dddf8

KSZ9477STXI

Microchip Tech · Pre-ordered MCUs · TQFP-128(14x14)

KSZ9477STXI from Microchip Tech, in a TQFP-128(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TXRX1P_A passive Port 1 1000BASE-T differential data pair A (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
2 TXRX1M_A passive Port 1 1000BASE-T differential data pair A (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
3 AVDDL power_in +1.2V analog power for the PHY core.
4 TXRX1P_B passive Port 1 1000BASE-T differential data pair B (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
5 TXRX1M_B passive Port 1 1000BASE-T differential data pair B (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
6 TXRX1P_C passive Port 1 1000BASE-T differential data pair C (+).
7 TXRX1M_C passive Port 1 1000BASE-T differential data pair C (-).
8 TXRX1P_D passive Port 1 1000BASE-T differential data pair D (+).
9 TXRX1M_D passive Port 1 1000BASE-T differential data pair D (-).
10 AVDDH power_in +2.5V analog power for the PHY transceivers and XI/XO interface.
11 DVDDL power_in +1.2V digital core power.
12 TXRX2P_A passive Port 2 1000BASE-T differential data pair A (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
13 TXRX2M_A passive Port 2 1000BASE-T differential data pair A (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
14 AVDDL power_in +1.2V analog power for the PHY core.
15 TXRX2P_B passive Port 2 1000BASE-T differential data pair B (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
16 TXRX2M_B passive Port 2 1000BASE-T differential data pair B (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
17 TXRX2P_C passive Port 2 1000BASE-T differential data pair C (+).
18 TXRX2M_C passive Port 2 1000BASE-T differential data pair C (-).
19 AVDDL power_in +1.2V analog power for the PHY core.
20 TXRX2P_D passive Port 2 1000BASE-T differential data pair D (+).
21 TXRX2M_D passive Port 2 1000BASE-T differential data pair D (-).
22 AVDDH power_in +2.5V analog power for the PHY transceivers and XI/XO interface.
23 DVDDL power_in +1.2V digital core power.
24 TXRX3P_A passive Port 3 1000BASE-T differential data pair A (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
25 TXRX3M_A passive Port 3 1000BASE-T differential data pair A (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
26 TXRX3P_B passive Port 3 1000BASE-T differential data pair B (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
27 TXRX3M_B passive Port 3 1000BASE-T differential data pair B (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
28 TXRX3P_C passive Port 3 1000BASE-T differential data pair C (+).
29 TXRX3M_C passive Port 3 1000BASE-T differential data pair C (-).
30 AVDDL power_in +1.2V analog power for the PHY core.
31 TXRX3P_D passive Port 3 1000BASE-T differential data pair D (+).
32 TXRX3M_D passive Port 3 1000BASE-T differential data pair D (-).
33 AVDDH power_in +2.5V analog power for the PHY transceivers and XI/XO interface.
34 TXRX4P_A passive Port 4 1000BASE-T differential data pair A (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
35 TXRX4M_A passive Port 4 1000BASE-T differential data pair A (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
36 AVDDL power_in +1.2V analog power for the PHY core.
37 TXRX4P_B passive Port 4 1000BASE-T differential data pair B (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
38 TXRX4M_B passive Port 4 1000BASE-T differential data pair B (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
39 TXRX4P_C passive Port 4 1000BASE-T differential data pair C (+).
40 TXRX4M_C passive Port 4 1000BASE-T differential data pair C (-).
41 AVDDL power_in +1.2V analog power for the PHY core.
42 TXRX4P_D passive Port 4 1000BASE-T differential data pair D (+).
43 TXRX4M_D passive Port 4 1000BASE-T differential data pair D (-).
44 AVDDH power_in +2.5V analog power for the PHY transceivers and XI/XO interface.
45 DVDDL power_in +1.2V digital core power.
46 GND power_in Ground (pins and exposed pad).
47 GND power_in Ground (pins and exposed pad).
48 TX_CLK6/REFCLKI6 bidirectional Port 6 transmit clock: 25/2.5MHz output in MII PHY mode or input in MAC mode, 50MHz RMII reference clock input in RMII normal mode, and 125/25/2.5MHz clock input in RGMII mode.
49 TX_EN6/TX_CTL6 input Port 6 transmit enable in MII/RMII modes or transmit control in RGMII mode.
50 TX_ER6 input Port 6 MII transmit error input; not used in RMII or RGMII and should not be connected in those modes.
51 COL6 bidirectional Port 6 MII collision detect (output in PHY mode, input in MAC mode); not used in RMII/RGMII and should not be connected in those modes.
52 TXD6_3 input Port 6 MII/RGMII transmit data bit 3; not used in RMII mode and should not be connected in that mode.
53 TXD6_2 input Port 6 MII/RGMII transmit data bit 2; not used in RMII mode and should not be connected in that mode.
54 TXD6_1 input Port 6 transmit data bit 1 for MII, RMII, and RGMII modes.
55 TXD6_0 input Port 6 transmit data bit 0 for MII, RMII, and RGMII modes.
56 DVDDL power_in +1.2V digital core power.
57 RX_CLK6/REFCLKO6 bidirectional Port 6 MII receive clock (25/2.5MHz); 50MHz RMII reference clock output in RMII clock mode; 125/25/2.5MHz RGMII receive clock output.
58 RX_DV6/CRS_DV6/RX_CTL6 output Port 6 MII receive data valid output, RMII carrier sense/receive data valid output, or RGMII receive control output.
59 RX_ER6 output Port 6 MII receive error output; not used in RMII or RGMII and should not be connected in those modes.
60 CRS6 bidirectional Port 6 MII carrier sense (output in PHY mode, input in MAC mode); not used in RMII/RGMII and should not be connected in those modes.
61 VDDIO power_in +3.3V / +2.5V / +1.8V I/O power.
62 RXD6_3 output Port 6 MII/RGMII receive data bit 3, also a configuration strap sampled at reset (Port 6 mode select); not used in RMII mode.
63 RXD6_2 output Port 6 MII/RGMII receive data bit 2, also a configuration strap sampled at reset (Port 6 mode select); not used in RMII mode.
64 RXD6_1 output Port 6 receive data bit 1 for MII/RMII/RGMII modes, also a configuration strap sampled at reset (Port 6 MII/RMII mode select).
65 RXD6_0 output Port 6 receive data bit 0 for MII/RMII/RGMII modes, also a configuration strap sampled at reset (Port 6 speed select, 1000 or 100 Mbps).
66 DVDDL power_in +1.2V digital core power.
67 IBA input In-band management configuration strap sampled at reset (0 = disabled, default; 1 = enabled).
68 VDDIO power_in +3.3V / +2.5V / +1.8V I/O power.
69 GND power_in Ground (pins and exposed pad).
70 DVDDL power_in +1.2V digital core power.
71 VDDLS power_in +1.2V SGMII core power.
72 VDDHS power_in +2.5V SGMII I/O power.
73 NC unconnected No connect; must be left unconnected for proper operation.
74 NC unconnected No connect; must be left unconnected for proper operation.
75 GND power_in Ground (pins and exposed pad).
76 S_REXT passive SGMII reference resistor; connect a 191Ω 1% resistor between this pin and GND using a short trace.
77 GND power_in Ground (pins and exposed pad).
78 S_IN7M input Port 7 SGMII differential input data (-).
79 S_IN7P input Port 7 SGMII differential input data (+).
80 GND power_in Ground (pins and exposed pad).
81 S_OUT7P output Port 7 SGMII differential output data (+).
82 S_OUT7M output Port 7 SGMII differential output data (-).
83 VDDHS power_in +2.5V SGMII I/O power.
84 VDDLS power_in +1.2V SGMII core power.
85 LED4_0 bidirectional Port 4 LED indicator 0, active-low sink to light an external LED; also a configuration strap sampled at reset.
86 LED4_1 bidirectional Port 4 LED indicator 1, active-low sink to light an external LED; also a configuration strap sampled at reset.
87 DVDDL power_in +1.2V digital core power.
88 LED3_0 bidirectional Port 3 LED indicator 0, active-low output that sinks current to light an external LED.
89 LED3_1 bidirectional Port 3 LED indicator 1, active-low output that sinks current to light an external LED; also a configuration strap sampled at reset.
90 GPIO_1 bidirectional General purpose I/O 1 for IEEE 1588 event trigger or timestamp capture, synchronized to the internal IEEE 1588 clock.
91 LED2_0 bidirectional Port 2 LED indicator 0, active-low output that sinks current to light an external LED; also a configuration strap sampled at reset.
92 LED2_1 bidirectional Port 2 LED indicator 1, active-low output that sinks current to light an external LED; also a configuration strap sampled at reset.
93 PME_N output Power management event output indicating an energy detect event; polarity is programmable (default active low) and requires an external pull-up for active-low operation.
94 INTRP_N output Active-low open-drain interrupt output that requires an external pull-up resistor; also a configuration strap sampled at reset.
95 SYNCLKO bidirectional 25/125MHz reference clock output derived from the crystal input or a PHY recovered clock, for Synchronous Ethernet; also a configuration strap that must be strapped high for SGMII operation.
96 RESET_N input Active-low system reset; the device must be reset during or after power-on, and an RC circuit is suggested for power-on reset.
97 SDO output SPI data out (MISO) in SPI mode; not used in I2C or MIIM modes.
98 SDI/SDA/MDIO bidirectional SPI data in (MOSI), I2C data, or MIIM MDIO; open-drain when driven and requires a 1.0kΩ to 4.7kΩ pull-up to VDDIO.
99 VDDIO power_in +3.3V / +2.5V / +1.8V I/O power.
100 SCS_N input SPI chip select, active low; not used in I2C or MIIM modes.
101 SCL/MDC input SPI/I2C serial clock, or MIIM MDC serial clock.
102 LED5_0 bidirectional Port 5 LED indicator 0, active-low output that sinks current to light an external LED.
103 LED5_1 bidirectional Port 5 LED indicator 1, active-low output that sinks current to light an external LED; also a configuration strap sampled at reset.
104 DVDDL power_in +1.2V digital core power.
105 LED1_0 bidirectional Port 1 LED indicator 0, active-low output that sinks current to light an external LED; also a configuration strap (Quiet-WIRE filtering enable) sampled at reset.
106 LED1_1 bidirectional Port 1 LED indicator 1, active-low output that sinks current to light an external LED; also a configuration strap (flow control enable) sampled at reset.
107 GND power_in Ground (pins and exposed pad).
108 NC unconnected No connect; must be left unconnected for proper operation.
109 GND power_in Ground (pins and exposed pad).
110 DVDDL power_in +1.2V digital core power.
111 AVDDH power_in +2.5V analog power for the PHY transceivers and XI/XO interface.
112 TXRX5P_A passive Port 5 1000BASE-T differential data pair A (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
113 TXRX5M_A passive Port 5 1000BASE-T differential data pair A (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
114 AVDDL power_in +1.2V analog power for the PHY core.
115 TXRX5P_B passive Port 5 1000BASE-T differential data pair B (+), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
116 TXRX5M_B passive Port 5 1000BASE-T differential data pair B (-), also used for 100BASE-TX and 10BASE-Te on the A and B pairs.
117 TXRX5P_C passive Port 5 1000BASE-T differential data pair C (+).
118 TXRX5M_C passive Port 5 1000BASE-T differential data pair C (-).
119 AVDDL power_in +1.2V analog power for the PHY core.
120 TXRX5P_D passive Port 5 1000BASE-T differential data pair D (+).
121 TXRX5M_D passive Port 5 1000BASE-T differential data pair D (-).
122 AVDDH power_in +2.5V analog power for the PHY transceivers and XI/XO interface.
123 GND power_in Ground (pins and exposed pad).
124 AVDDL power_in +1.2V analog power for the PHY core.
125 XO output Crystal clock output; connect to one lead of a 25MHz crystal, or leave unconnected when an oscillator drives XI.
126 XI input Crystal clock/oscillator input; 25MHz crystal lead or external oscillator input, with crystal tolerance of ±50ppm.
127 ISET passive Transmit output current set resistor; must be connected to GND through a 6.04kΩ 1% resistor.
128 AVDDH power_in +2.5V analog power for the PHY transceivers and XI/XO interface.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-128(14x14)
Category Embedded Processors & Controllers
Pins 128

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (AVDDL, DVDDL, VDDLS) AVDDL, DVDDL, VDDLS 1.14 1.26 V 235
Supply Voltage (AVDDH, VDDHS) AVDDH, VDDHS 2.375 2.625 V 235
Supply Voltage (VDDIO @ 3.3V) VDDIO 3.135 3.465 V @ 3.3V 235
Supply Voltage (VDDIO @ 2.5V) VDDIO 2.375 2.625 V @ 2.5V 235
Supply Voltage (VDDIO @ 1.8V) VDDIO 1.71 1.89 V @ 1.8V 235
Ambient Operating Temperature in Still Air TA -40 85 °C Industrial version (Note 6-1) 235
Supply Voltage (AVDDL, DVDDL, VDDLS) AVDDL, DVDDL, VDDLS -0.5 1.8 V 235
Supply Voltage (AVDDH, VDDIO, VDDHS) AVDDH, VDDIO, VDDHS -0.5 5 V 235
Input Voltage (all inputs) -0.5 5 V 235
Output Voltage (all outputs) -0.5 5 V 235
Lead Temperature (soldering) 260 °C 20 sec. 235
Storage Temperature TS -65 150 °C 235
Maximum Junction Temperature TJ 125 °C 235
HBM ESD Performance -6 6 kV HBM 235
AVDDH supply current (Full 1000 Mbps) IDD_AH 330 mA VDDIO @3.3V; Ports 1-5 in 1000BASE-T; Ports 6 & 7 @ 1000 Mbps; All ports 100% utilization 236
VDDIO supply current (Full 1000 Mbps) IDD_IO 45 mA 236
AVDDL supply current (Full 1000 Mbps) IDD_CA 460 mA 236
DVDDL supply current (Full 1000 Mbps) IDD_CD 750 mA 236
VDDHS supply current (Full 1000 Mbps) IDD_HS 20 mA 236
VDDLS supply current (Full 1000 Mbps) IDD_LS 15 mA 236
AVDDH supply current (Energy Detect Mode) IDD_AH 20 mA 237
VDDIO supply current (Energy Detect Mode) IDD_IO 30 mA (3.3V) 237
AVDDL supply current (Energy Detect Mode) IDD_CA 30 mA 237
DVDDL supply current (Energy Detect Mode) IDD_CD 150 mA 237
VDDHS supply current (Energy Detect Mode) IDD_HS 20 mA 237
VDDLS supply current (Energy Detect Mode) IDD_LS 15 mA 237
AVDDH supply current (Global Soft Power Down) IDD_AH 2 mA 237
VDDIO supply current (Global Soft Power Down) IDD_IO 6 mA (3.3V) 237
AVDDL supply current (Global Soft Power Down) IDD_CA 0.01 mA 237
DVDDL supply current (Global Soft Power Down) IDD_CD 5 mA 237
VDDHS supply current (Global Soft Power Down) IDD_HS 20 mA 237
VDDLS supply current (Global Soft Power Down) IDD_LS 15 mA 237
Input High Voltage (CMOS input) VIH 2.1 V VDDIO = 3.3V 237
Input High Voltage (CMOS input) VIH 1.7 V VDDIO = 2.5V 237
Input High Voltage (CMOS input) VIH 1.3 V VDDIO = 1.8V 237
Input Low Voltage (CMOS input) VIL 0.9 V VDDIO = 3.3V 237
Input Low Voltage (CMOS input) VIL 0.6 V VDDIO = 1.8V 237
Input Current (CMOS input) IIN -10 10 µA VIN = GND ~ VDDIO 237
Output High Voltage (O8) VOH 2.4 V VDDIO = 3.3V; IOH = 8 mA 237
Output High Voltage (O8) VOH 1.9 V VDDIO = 2.5V; IOH = 8 mA 237
Output High Voltage (O8) VOH 1.5 V VDDIO = 1.8V; IOH = 6 mA 237
Output Low Voltage (O8) VOL 0.4 V VDDIO = 3.3V; IOL = 8 mA 237
Output Low Voltage (O8) VOL 0.2 V VDDIO = 1.8V; IOL = 6 mA 237
Output Tri-State Leakage (O8) IOZ 10 µA VIN = GND ~ VDDIO 237
Minimum RX Eye Height (differential peak-to-peak) VRXEYE 175 mV 237
Differential Input Impedance ZIN 85 115 Ω 237
PPM Tolerance PPM -350 350 ppm 237
Driver Output Voltage (peak-to-peak, differential amplitude) VDIFF 0.8 1.2 V 238
Transmit Common Mode Voltage VCTM 0.4 0.6 V 238
Driver Differential Output Impedance ZD 85 115 Ω 238
Peak Differential Output (100BASE-TX) VO 0.95 1.05 V 100Ω termination on the differential output 238
Rise/Fall Time (100BASE-TX) tr, tf 3 5 ns 238
Peak Differential Output Voltage (10BASE-Te) Vp 1.54 1.75 1.96 V 100Ω termination on the differential output 238
Junction to Ambient Resistance JA 11.3 °C/W 6-layer PCB per JESD51; 0 m/s (Note 6-3) 235
Junction to Ambient Resistance JA 14.4 °C/W 4-layer PCB per JESD51 (Note 6-3) 235
Junction to Case Characterization JT 0.04 °C/W 0 m/s air velocity (Note 6-2) 235
Junction to Case Resistance JC 1.5 °C/W 6-layer PCB per JESD51 (Note 6-4) 235
Junction to Case Resistance JC 1.21 °C/W 4-layer PCB per JESD51 (Note 6-4) 235

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs Quiet-WIRE is a feature to enhance 100BASE-TX EMC performance by reducing both conducted and radiated emis￾sions from the TXP/M signal pair. It can be used either to reduce absolute emissions, or to e 24

CAD (KiCad official)

  • Symbol: KSZ9477STXI
  • Footprint: Package_QFP:TQFP-128_14x14mm_P0.4mm
  • 3D model: TQFP-128(14x14) (KiCad packages3D, STEP)
  • 3D model files: ksz9477stxi-etched.step / ksz9477stxi-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz9477stxi.step / ksz9477stxi.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (266 pp, sha256 73deb606faa230e8, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF