main
Ray
Publish 0.1.0
dbd32f7
KSZ8863RLLI-TR
Microchip Tech · Ethernet Transceivers · LQFP-48(7x7)
KSZ8863RLLI-TR from Microchip Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXM1 | bidirectional | Port 1 physical receive or transmit signal (- differential). |
| 2 | RXP1 | bidirectional | Port 1 physical receive or transmit signal (+ differential). |
| 3 | TXM1 | bidirectional | Port 1 physical transmit or receive signal (- differential). |
| 4 | TXP1 | bidirectional | Port 1 physical transmit or receive signal (+ differential). |
| 5 | VDDA_3.3 | power_in | 3.3V analog VDD supply for the transceiver. |
| 6 | ISET | output | Sets the physical transmit output current; pull down with an 11.8 kΩ 1% resistor to ground. |
| 7 | VDDA_1.8 | power_in | 1.8V analog core power input, sourced from VDDCO (pin 42). |
| 8 | RXM2 | bidirectional | Port 2 physical receive or transmit signal (- differential). |
| 9 | RXP2 | bidirectional | Port 2 physical receive or transmit signal (+ differential). |
| 10 | AGND | power_in | Analog ground. |
| 11 | TXM2 | bidirectional | Port 2 physical transmit or receive signal (- differential). |
| 12 | TXP2 | bidirectional | Port 2 physical transmit or receive signal (+ differential). |
| 13 | NC | unconnected | No connection. |
| 14 | X1 | input | 25 MHz or 50 MHz crystal or oscillator clock input (±50 ppm); if an oscillator is used it must be 3.3V tolerant and applied before the reset voltage goes high. |
| 15 | X2 | output | Crystal connection; left as NC when an oscillator is driven into X1. |
| 16 | SMTXEN3 | input | Switch MII transmit enable (internal pull-up). |
| 17 | SMTXD33/EN_REFCLKO_3 | input | RLL strap for RMII clock selection: pull-up enables the REFCLKO_3 output, pull-down disables it. |
| 18 | SMTXD32 | input | RLL strap for X1 clock selection (Rev A3 and earlier): pull-up selects 25 MHz on X1 (default), pull-down selects 50 MHz on X1 for the RMII reference clock. |
| 19 | SMTXD31 | input | Switch MII/RMII transmit data bit 1 (internal pull-up). |
| 20 | SMTXD30 | input | Switch MII/RMII transmit data bit 0 (internal pull-up). |
| 21 | GND | power_in | Digital ground. |
| 22 | VDDIO | power_in | 3.3V, 2.5V, or 1.8V digital I/O supply input; requires well-decoupled capacitors. |
| 23 | SMTXC3/REFCLKI_3 | bidirectional | RLL 50 MHz RMII reference clock input; a pull-down resistor is needed when the internal reference clock is used (register 198 bit 3). |
| 24 | SMTXER3/MII_LINK_3 | input | Port 3 MII transmit error input; in MII PHY mode it is the MII link indicator, where high means no link and enables bypass mode. |
| 25 | SMRXDV3 | bidirectional | Switch MII/RMII receive data valid; strap for port 1 duplex default (P1DPX) when auto-negotiation fails or is disabled. |
| 26 | SMRXD33/REFCLKO_3 | bidirectional | RLL 50 MHz reference clock output in RMII mode; strap for enabling port 2 auto-negotiation (P2ANEN) with pull-up. |
| 27 | SMRXD32 | bidirectional | Switch MII receive data bit 2; strap forces port 2 speed (P2SPD) when P2ANEN=0 (pull-up 100BT, pull-down 10BT). |
| 28 | SMRXD31 | bidirectional | Switch MII/RMII receive data bit 1; strap sets port 2 duplex default (P2DPX) when auto-negotiation fails or is disabled. |
| 29 | SMRXD30 | bidirectional | Switch MII/RMII receive data bit 0; strap forces port 2 flow control (P2FFC) when pulled up. |
| 30 | SMRXC3 | bidirectional | Switch MII receive clock; output in PHY MII mode and input in MAC MII mode. |
| 31 | GND | power_in | Digital ground. |
| 32 | VDDC | power_in | 1.8V digital core power input, sourced from VDDCO (pin 42). |
| 33 | SCOL3 | bidirectional | Switch MII collision detect (internal pull-up during reset). |
| 34 | SCRS3 | bidirectional | Switch MII carrier sense (internal pull-up during reset). |
| 35 | INTRN | output | Active-low interrupt to the host CPU, asserted when an interrupt status bit is set on lost link (registers 187 and 188); internal pull-up. |
| 36 | SCL_MDC | bidirectional | Clock pin: SPI or I2C client clock input, I2C host clock output, or MIIM clock input depending on the selected serial mode. |
| 37 | SDA_MDIO | bidirectional | Serial data pin for SPI, I2C, or MIIM; an external pull-up is needed when in use. |
| 38 | SPIQ | bidirectional | SPI client serial data output; an external pull-up is needed when in use; strap forces port 1 flow control (P1FFC) when pulled up. |
| 39 | SPISN | input | SPI client chip select, active low; a high level deselects the device and holds SPIQ high-impedance; external pull-up needed when using SPI or MDC/MDIO. |
| 40 | VDDIO | power_in | 3.3V, 2.5V, or 1.8V digital I/O supply input; requires well-decoupled capacitors. |
| 41 | GND | power_in | Digital ground. |
| 42 | VDDCO | power_out | 1.8V core LDO regulator output feeding VDDA_1.8 and VDDC; do not connect an external supply to this pin and place a ferrite bead between analog and digital 1.8V core. |
| 43 | P1LED1 | bidirectional | Port 1 LED indicator (default speed); strap forces port 1 speed (P1SPD) when P1ANEN=0 (pull-up 100BT, pull-down 10BT). |
| 44 | P1LED0 | bidirectional | Port 1 LED indicator (default link/activity); strap enables port 1 auto-negotiation (P1ANEN) with pull-up (pull-up recommended in design). |
| 45 | P2LED1 | bidirectional | Port 2 LED indicator (default speed); together with P2LED0 it selects the serial bus mode at reset. |
| 46 | P2LED0 | bidirectional | Port 2 LED indicator (default link/activity); with P2LED1 selects the serial mode: 00 I2C host (EEPROM), 01 I2C client, 10 SPI client, 11 SMI/MIIM. |
| 47 | RSTN | input | Hardware reset input, active low, with internal pull-up. |
| 48 | FXSD1 | input | RLL: no connection or tie to analog ground through a 1 kΩ pull-down resistor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | LQFP-48(7x7) |
| Category | Interface |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDDA_1.8, VDDC) | VDDA_1.8, VDDC | 1.67 | 1.94 | V | 72 | ||
| Supply Voltage (VDDA_3.3) | VDDA_3.3 | 3.135 | 3.465 | V | 72 | ||
| Supply Voltage (VDDIO) | VDDIO | 1.71 | 3.465 | V | 72 | ||
| Ambient Temperature (Industrial) | TA | -40 | 85 | °C | Industrial grade | 72 | |
| Junction Temperature | TJ | 125 | °C | 72 | |||
| Supply Voltage (VDDA_1.8, VDDC) | VIN | -0.5 | 2.4 | V | 72 | ||
| Supply Voltage (VDDA_3.3, VDDIO) | VIN | -0.5 | 4 | V | 72 | ||
| Input Voltage | -0.5 | 4 | V | 72 | |||
| Output Voltage | -0.5 | 4 | V | 72 | |||
| Lead Temperature (soldering, 10s) | 260 | °C | soldering, 10 s | 72 | |||
| Storage Temperature | TS | -55 | 150 | °C | 72 | ||
| HBM ESD Rating | 4 | kV | HBM | 72 | |||
| Input High Voltage | VIH | 2 | V | VDDIO = 3.3V | 73 | ||
| Input High Voltage | VIH | 1.8 | V | VDDIO = 2.5V | 73 | ||
| Input High Voltage | VIH | 1.3 | V | VDDIO = 1.8V | 73 | ||
| Input Low Voltage | VIL | 0.8 | V | VDDIO = 3.3V | 73 | ||
| Input Low Voltage | VIL | 0.7 | V | VDDIO = 2.5V | 73 | ||
| Input Low Voltage | VIL | 0.5 | V | VDDIO = 1.8V | 73 | ||
| Input Current | IIN | -10 | 10 | µA | VIN = GND ~ VDDIO | 73 | |
| Output High Voltage | VOH | 2.4 | V | IOH = 8 mA, VDDIO = 3.3V | 73 | ||
| Output High Voltage | VOH | 2 | V | IOH = 8 mA, VDDIO = 2.5V | 73 | ||
| Output High Voltage | VOH | 1.5 | V | IOH = 8 mA, VDDIO = 1.8V | 73 | ||
| Output Low Voltage | VOL | 0.4 | V | IOL = 8 mA, VDDIO = 3.3V | 73 | ||
| Output Low Voltage | VOL | 0.3 | V | IOL = 8 mA, VDDIO = 1.8V | 73 | ||
| Output Tri-State Leakage | /IOZ/ | 10 | µA | 73 | |||
| Peak Differential Output Voltage | VO | 0.95 | 1.05 | V | 100Ω termination across differential output | 73 | |
| Output Voltage Imbalance | VIMB | 2 | % | 100Ω termination across differential output | 73 | ||
| Rise/Fall Time | tr/tf | 3 | 5 | ns | 73 | ||
| Rise/Fall Time Imbalance | 0 | 0.5 | ns | 73 | |||
| Duty Cycle Distortion | -0.5 | 0.5 | ns | 73 | |||
| Overshoot | 5 | % | 73 | ||||
| Output Jitter (100BASE-TX) | 0.7 | 1.4 | ns | Peak-to-peak | 73 | ||
| Output Jitter (10BASE-T) | 1.4 | 11 | ns | Peak-to-peak | 74 | ||
| Thermal Resistance LQFP (junction-to-ambient) | ΘJA | 52.83 | °C/W | No heat spreader (Note 5-1) | 72 | ||
| Thermal Resistance LQFP (junction-to-case) | ΘJC | 19.12 | °C/W | No heat spreader (Note 5-1) | 72 |
CAD (KiCad official)
- Symbol:
KSZ8863RLLI-TR - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
ksz8863rlli-tr-etched.step/ksz8863rlli-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ksz8863rlli-tr.step/ksz8863rlli-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (92 pp, sha256
285f1f868d3f2637, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# KSZ8863RLLI-TR
**Microchip Tech** · Ethernet Transceivers · LQFP-48(7x7)
KSZ8863RLLI-TR from Microchip Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RXM1 | bidirectional | Port 1 physical receive or transmit signal (- differential). |
| 2 | RXP1 | bidirectional | Port 1 physical receive or transmit signal (+ differential). |
| 3 | TXM1 | bidirectional | Port 1 physical transmit or receive signal (- differential). |
| 4 | TXP1 | bidirectional | Port 1 physical transmit or receive signal (+ differential). |
| 5 | VDDA_3.3 | power_in | 3.3V analog VDD supply for the transceiver. |
| 6 | ISET | output | Sets the physical transmit output current; pull down with an 11.8 kΩ 1% resistor to ground. |
| 7 | VDDA_1.8 | power_in | 1.8V analog core power input, sourced from VDDCO (pin 42). |
| 8 | RXM2 | bidirectional | Port 2 physical receive or transmit signal (- differential). |
| 9 | RXP2 | bidirectional | Port 2 physical receive or transmit signal (+ differential). |
| 10 | AGND | power_in | Analog ground. |
| 11 | TXM2 | bidirectional | Port 2 physical transmit or receive signal (- differential). |
| 12 | TXP2 | bidirectional | Port 2 physical transmit or receive signal (+ differential). |
| 13 | NC | unconnected | No connection. |
| 14 | X1 | input | 25 MHz or 50 MHz crystal or oscillator clock input (±50 ppm); if an oscillator is used it must be 3.3V tolerant and applied before the reset voltage goes high. |
| 15 | X2 | output | Crystal connection; left as NC when an oscillator is driven into X1. |
| 16 | SMTXEN3 | input | Switch MII transmit enable (internal pull-up). |
| 17 | SMTXD33/EN_REFCLKO_3 | input | RLL strap for RMII clock selection: pull-up enables the REFCLKO_3 output, pull-down disables it. |
| 18 | SMTXD32 | input | RLL strap for X1 clock selection (Rev A3 and earlier): pull-up selects 25 MHz on X1 (default), pull-down selects 50 MHz on X1 for the RMII reference clock. |
| 19 | SMTXD31 | input | Switch MII/RMII transmit data bit 1 (internal pull-up). |
| 20 | SMTXD30 | input | Switch MII/RMII transmit data bit 0 (internal pull-up). |
| 21 | GND | power_in | Digital ground. |
| 22 | VDDIO | power_in | 3.3V, 2.5V, or 1.8V digital I/O supply input; requires well-decoupled capacitors. |
| 23 | SMTXC3/REFCLKI_3 | bidirectional | RLL 50 MHz RMII reference clock input; a pull-down resistor is needed when the internal reference clock is used (register 198 bit 3). |
| 24 | SMTXER3/MII_LINK_3 | input | Port 3 MII transmit error input; in MII PHY mode it is the MII link indicator, where high means no link and enables bypass mode. |
| 25 | SMRXDV3 | bidirectional | Switch MII/RMII receive data valid; strap for port 1 duplex default (P1DPX) when auto-negotiation fails or is disabled. |
| 26 | SMRXD33/REFCLKO_3 | bidirectional | RLL 50 MHz reference clock output in RMII mode; strap for enabling port 2 auto-negotiation (P2ANEN) with pull-up. |
| 27 | SMRXD32 | bidirectional | Switch MII receive data bit 2; strap forces port 2 speed (P2SPD) when P2ANEN=0 (pull-up 100BT, pull-down 10BT). |
| 28 | SMRXD31 | bidirectional | Switch MII/RMII receive data bit 1; strap sets port 2 duplex default (P2DPX) when auto-negotiation fails or is disabled. |
| 29 | SMRXD30 | bidirectional | Switch MII/RMII receive data bit 0; strap forces port 2 flow control (P2FFC) when pulled up. |
| 30 | SMRXC3 | bidirectional | Switch MII receive clock; output in PHY MII mode and input in MAC MII mode. |
| 31 | GND | power_in | Digital ground. |
| 32 | VDDC | power_in | 1.8V digital core power input, sourced from VDDCO (pin 42). |
| 33 | SCOL3 | bidirectional | Switch MII collision detect (internal pull-up during reset). |
| 34 | SCRS3 | bidirectional | Switch MII carrier sense (internal pull-up during reset). |
| 35 | INTRN | output | Active-low interrupt to the host CPU, asserted when an interrupt status bit is set on lost link (registers 187 and 188); internal pull-up. |
| 36 | SCL_MDC | bidirectional | Clock pin: SPI or I2C client clock input, I2C host clock output, or MIIM clock input depending on the selected serial mode. |
| 37 | SDA_MDIO | bidirectional | Serial data pin for SPI, I2C, or MIIM; an external pull-up is needed when in use. |
| 38 | SPIQ | bidirectional | SPI client serial data output; an external pull-up is needed when in use; strap forces port 1 flow control (P1FFC) when pulled up. |
| 39 | SPISN | input | SPI client chip select, active low; a high level deselects the device and holds SPIQ high-impedance; external pull-up needed when using SPI or MDC/MDIO. |
| 40 | VDDIO | power_in | 3.3V, 2.5V, or 1.8V digital I/O supply input; requires well-decoupled capacitors. |
| 41 | GND | power_in | Digital ground. |
| 42 | VDDCO | power_out | 1.8V core LDO regulator output feeding VDDA_1.8 and VDDC; do not connect an external supply to this pin and place a ferrite bead between analog and digital 1.8V core. |
| 43 | P1LED1 | bidirectional | Port 1 LED indicator (default speed); strap forces port 1 speed (P1SPD) when P1ANEN=0 (pull-up 100BT, pull-down 10BT). |
| 44 | P1LED0 | bidirectional | Port 1 LED indicator (default link/activity); strap enables port 1 auto-negotiation (P1ANEN) with pull-up (pull-up recommended in design). |
| 45 | P2LED1 | bidirectional | Port 2 LED indicator (default speed); together with P2LED0 it selects the serial bus mode at reset. |
| 46 | P2LED0 | bidirectional | Port 2 LED indicator (default link/activity); with P2LED1 selects the serial mode: 00 I2C host (EEPROM), 01 I2C client, 10 SPI client, 11 SMI/MIIM. |
| 47 | RSTN | input | Hardware reset input, active low, with internal pull-up. |
| 48 | FXSD1 | input | RLL: no connection or tie to analog ground through a 1 kΩ pull-down resistor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | LQFP-48(7x7) |
| Category | Interface |
| Pins | 48 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDDA_1.8, VDDC) | VDDA_1.8, VDDC | 1.67 | | 1.94 | V | | 72 |
| Supply Voltage (VDDA_3.3) | VDDA_3.3 | 3.135 | | 3.465 | V | | 72 |
| Supply Voltage (VDDIO) | VDDIO | 1.71 | | 3.465 | V | | 72 |
| Ambient Temperature (Industrial) | TA | -40 | | 85 | °C | Industrial grade | 72 |
| Junction Temperature | TJ | | | 125 | °C | | 72 |
| Supply Voltage (VDDA_1.8, VDDC) | VIN | -0.5 | | 2.4 | V | | 72 |
| Supply Voltage (VDDA_3.3, VDDIO) | VIN | -0.5 | | 4 | V | | 72 |
| Input Voltage | | -0.5 | | 4 | V | | 72 |
| Output Voltage | | -0.5 | | 4 | V | | 72 |
| Lead Temperature (soldering, 10s) | | | | 260 | °C | soldering, 10 s | 72 |
| Storage Temperature | TS | -55 | | 150 | °C | | 72 |
| HBM ESD Rating | | | | 4 | kV | HBM | 72 |
| Input High Voltage | VIH | 2 | | | V | VDDIO = 3.3V | 73 |
| Input High Voltage | VIH | 1.8 | | | V | VDDIO = 2.5V | 73 |
| Input High Voltage | VIH | 1.3 | | | V | VDDIO = 1.8V | 73 |
| Input Low Voltage | VIL | | | 0.8 | V | VDDIO = 3.3V | 73 |
| Input Low Voltage | VIL | | | 0.7 | V | VDDIO = 2.5V | 73 |
| Input Low Voltage | VIL | | | 0.5 | V | VDDIO = 1.8V | 73 |
| Input Current | IIN | -10 | | 10 | µA | VIN = GND ~ VDDIO | 73 |
| Output High Voltage | VOH | 2.4 | | | V | IOH = 8 mA, VDDIO = 3.3V | 73 |
| Output High Voltage | VOH | 2 | | | V | IOH = 8 mA, VDDIO = 2.5V | 73 |
| Output High Voltage | VOH | 1.5 | | | V | IOH = 8 mA, VDDIO = 1.8V | 73 |
| Output Low Voltage | VOL | | | 0.4 | V | IOL = 8 mA, VDDIO = 3.3V | 73 |
| Output Low Voltage | VOL | | | 0.3 | V | IOL = 8 mA, VDDIO = 1.8V | 73 |
| Output Tri-State Leakage | /IOZ/ | | | 10 | µA | | 73 |
| Peak Differential Output Voltage | VO | 0.95 | | 1.05 | V | 100Ω termination across differential output | 73 |
| Output Voltage Imbalance | VIMB | | | 2 | % | 100Ω termination across differential output | 73 |
| Rise/Fall Time | tr/tf | 3 | | 5 | ns | | 73 |
| Rise/Fall Time Imbalance | | 0 | | 0.5 | ns | | 73 |
| Duty Cycle Distortion | | -0.5 | | 0.5 | ns | | 73 |
| Overshoot | | | | 5 | % | | 73 |
| Output Jitter (100BASE-TX) | | | 0.7 | 1.4 | ns | Peak-to-peak | 73 |
| Output Jitter (10BASE-T) | | | 1.4 | 11 | ns | Peak-to-peak | 74 |
| Thermal Resistance LQFP (junction-to-ambient) | ΘJA | | 52.83 | | °C/W | No heat spreader (Note 5-1) | 72 |
| Thermal Resistance LQFP (junction-to-case) | ΘJC | | 19.12 | | °C/W | No heat spreader (Note 5-1) | 72 |
## CAD (KiCad official)
- Symbol: `KSZ8863RLLI-TR`
- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`
- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files: `ksz8863rlli-tr-etched.step` / `ksz8863rlli-tr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ksz8863rlli-tr.step` / `ksz8863rlli-tr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586212529689808896) (92 pp, sha256 `285f1f868d3f2637`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ksz8863rlli-tr-datasheet.pdf)