main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ksz8863rlli-tr: symbol repaired (body fitted to the names) · Ray
ksz8863rlli-tr-etched.glb Publish 0.1.0 · Ray
ksz8863rlli-tr-etched.step ksz8863rlli-tr: factory component page (tier=lcsc) · Ray
ksz8863rlli-tr-hero.glb ksz8863rlli-tr: hero GLB from the etched model (keeps the MPN mark) · Ray
ksz8863rlli-tr-hero.overlay.json Publish 0.1.0 · Ray
ksz8863rlli-tr.glb Publish 0.1.0 · Ray
ksz8863rlli-tr.kicad_mod Publish 0.1.0 · Ray
ksz8863rlli-tr.kicad_sym ksz8863rlli-tr: symbol repaired (body fitted to the names) · Ray
ksz8863rlli-tr.lbr ksz8863rlli-tr: symbol repaired (body fitted to the names) · Ray
ksz8863rlli-tr.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

KSZ8863RLLI-TR

Microchip Tech · Ethernet Transceivers · LQFP-48(7x7)

KSZ8863RLLI-TR from Microchip Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RXM1 bidirectional Port 1 physical receive or transmit signal (- differential).
2 RXP1 bidirectional Port 1 physical receive or transmit signal (+ differential).
3 TXM1 bidirectional Port 1 physical transmit or receive signal (- differential).
4 TXP1 bidirectional Port 1 physical transmit or receive signal (+ differential).
5 VDDA_3.3 power_in 3.3V analog VDD supply for the transceiver.
6 ISET output Sets the physical transmit output current; pull down with an 11.8 kΩ 1% resistor to ground.
7 VDDA_1.8 power_in 1.8V analog core power input, sourced from VDDCO (pin 42).
8 RXM2 bidirectional Port 2 physical receive or transmit signal (- differential).
9 RXP2 bidirectional Port 2 physical receive or transmit signal (+ differential).
10 AGND power_in Analog ground.
11 TXM2 bidirectional Port 2 physical transmit or receive signal (- differential).
12 TXP2 bidirectional Port 2 physical transmit or receive signal (+ differential).
13 NC unconnected No connection.
14 X1 input 25 MHz or 50 MHz crystal or oscillator clock input (±50 ppm); if an oscillator is used it must be 3.3V tolerant and applied before the reset voltage goes high.
15 X2 output Crystal connection; left as NC when an oscillator is driven into X1.
16 SMTXEN3 input Switch MII transmit enable (internal pull-up).
17 SMTXD33/EN_REFCLKO_3 input RLL strap for RMII clock selection: pull-up enables the REFCLKO_3 output, pull-down disables it.
18 SMTXD32 input RLL strap for X1 clock selection (Rev A3 and earlier): pull-up selects 25 MHz on X1 (default), pull-down selects 50 MHz on X1 for the RMII reference clock.
19 SMTXD31 input Switch MII/RMII transmit data bit 1 (internal pull-up).
20 SMTXD30 input Switch MII/RMII transmit data bit 0 (internal pull-up).
21 GND power_in Digital ground.
22 VDDIO power_in 3.3V, 2.5V, or 1.8V digital I/O supply input; requires well-decoupled capacitors.
23 SMTXC3/REFCLKI_3 bidirectional RLL 50 MHz RMII reference clock input; a pull-down resistor is needed when the internal reference clock is used (register 198 bit 3).
24 SMTXER3/MII_LINK_3 input Port 3 MII transmit error input; in MII PHY mode it is the MII link indicator, where high means no link and enables bypass mode.
25 SMRXDV3 bidirectional Switch MII/RMII receive data valid; strap for port 1 duplex default (P1DPX) when auto-negotiation fails or is disabled.
26 SMRXD33/REFCLKO_3 bidirectional RLL 50 MHz reference clock output in RMII mode; strap for enabling port 2 auto-negotiation (P2ANEN) with pull-up.
27 SMRXD32 bidirectional Switch MII receive data bit 2; strap forces port 2 speed (P2SPD) when P2ANEN=0 (pull-up 100BT, pull-down 10BT).
28 SMRXD31 bidirectional Switch MII/RMII receive data bit 1; strap sets port 2 duplex default (P2DPX) when auto-negotiation fails or is disabled.
29 SMRXD30 bidirectional Switch MII/RMII receive data bit 0; strap forces port 2 flow control (P2FFC) when pulled up.
30 SMRXC3 bidirectional Switch MII receive clock; output in PHY MII mode and input in MAC MII mode.
31 GND power_in Digital ground.
32 VDDC power_in 1.8V digital core power input, sourced from VDDCO (pin 42).
33 SCOL3 bidirectional Switch MII collision detect (internal pull-up during reset).
34 SCRS3 bidirectional Switch MII carrier sense (internal pull-up during reset).
35 INTRN output Active-low interrupt to the host CPU, asserted when an interrupt status bit is set on lost link (registers 187 and 188); internal pull-up.
36 SCL_MDC bidirectional Clock pin: SPI or I2C client clock input, I2C host clock output, or MIIM clock input depending on the selected serial mode.
37 SDA_MDIO bidirectional Serial data pin for SPI, I2C, or MIIM; an external pull-up is needed when in use.
38 SPIQ bidirectional SPI client serial data output; an external pull-up is needed when in use; strap forces port 1 flow control (P1FFC) when pulled up.
39 SPISN input SPI client chip select, active low; a high level deselects the device and holds SPIQ high-impedance; external pull-up needed when using SPI or MDC/MDIO.
40 VDDIO power_in 3.3V, 2.5V, or 1.8V digital I/O supply input; requires well-decoupled capacitors.
41 GND power_in Digital ground.
42 VDDCO power_out 1.8V core LDO regulator output feeding VDDA_1.8 and VDDC; do not connect an external supply to this pin and place a ferrite bead between analog and digital 1.8V core.
43 P1LED1 bidirectional Port 1 LED indicator (default speed); strap forces port 1 speed (P1SPD) when P1ANEN=0 (pull-up 100BT, pull-down 10BT).
44 P1LED0 bidirectional Port 1 LED indicator (default link/activity); strap enables port 1 auto-negotiation (P1ANEN) with pull-up (pull-up recommended in design).
45 P2LED1 bidirectional Port 2 LED indicator (default speed); together with P2LED0 it selects the serial bus mode at reset.
46 P2LED0 bidirectional Port 2 LED indicator (default link/activity); with P2LED1 selects the serial mode: 00 I2C host (EEPROM), 01 I2C client, 10 SPI client, 11 SMI/MIIM.
47 RSTN input Hardware reset input, active low, with internal pull-up.
48 FXSD1 input RLL: no connection or tie to analog ground through a 1 kΩ pull-down resistor.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package LQFP-48(7x7)
Category Interface
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDDA_1.8, VDDC) VDDA_1.8, VDDC 1.67 1.94 V 72
Supply Voltage (VDDA_3.3) VDDA_3.3 3.135 3.465 V 72
Supply Voltage (VDDIO) VDDIO 1.71 3.465 V 72
Ambient Temperature (Industrial) TA -40 85 °C Industrial grade 72
Junction Temperature TJ 125 °C 72
Supply Voltage (VDDA_1.8, VDDC) VIN -0.5 2.4 V 72
Supply Voltage (VDDA_3.3, VDDIO) VIN -0.5 4 V 72
Input Voltage -0.5 4 V 72
Output Voltage -0.5 4 V 72
Lead Temperature (soldering, 10s) 260 °C soldering, 10 s 72
Storage Temperature TS -55 150 °C 72
HBM ESD Rating 4 kV HBM 72
Input High Voltage VIH 2 V VDDIO = 3.3V 73
Input High Voltage VIH 1.8 V VDDIO = 2.5V 73
Input High Voltage VIH 1.3 V VDDIO = 1.8V 73
Input Low Voltage VIL 0.8 V VDDIO = 3.3V 73
Input Low Voltage VIL 0.7 V VDDIO = 2.5V 73
Input Low Voltage VIL 0.5 V VDDIO = 1.8V 73
Input Current IIN -10 10 µA VIN = GND ~ VDDIO 73
Output High Voltage VOH 2.4 V IOH = 8 mA, VDDIO = 3.3V 73
Output High Voltage VOH 2 V IOH = 8 mA, VDDIO = 2.5V 73
Output High Voltage VOH 1.5 V IOH = 8 mA, VDDIO = 1.8V 73
Output Low Voltage VOL 0.4 V IOL = 8 mA, VDDIO = 3.3V 73
Output Low Voltage VOL 0.3 V IOL = 8 mA, VDDIO = 1.8V 73
Output Tri-State Leakage /IOZ/ 10 µA 73
Peak Differential Output Voltage VO 0.95 1.05 V 100Ω termination across differential output 73
Output Voltage Imbalance VIMB 2 % 100Ω termination across differential output 73
Rise/Fall Time tr/tf 3 5 ns 73
Rise/Fall Time Imbalance 0 0.5 ns 73
Duty Cycle Distortion -0.5 0.5 ns 73
Overshoot 5 % 73
Output Jitter (100BASE-TX) 0.7 1.4 ns Peak-to-peak 73
Output Jitter (10BASE-T) 1.4 11 ns Peak-to-peak 74
Thermal Resistance LQFP (junction-to-ambient) ΘJA 52.83 °C/W No heat spreader (Note 5-1) 72
Thermal Resistance LQFP (junction-to-case) ΘJC 19.12 °C/W No heat spreader (Note 5-1) 72

CAD (KiCad official)

  • Symbol: KSZ8863RLLI-TR
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: ksz8863rlli-tr-etched.step / ksz8863rlli-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz8863rlli-tr.step / ksz8863rlli-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (92 pp, sha256 285f1f868d3f2637, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF