main
Ray Publish 0.1.0 124a45f
{
  "slug": "ksz8091mnxca",
  "version": "0.1.0",
  "type": "component",
  "description": "Microchip Tech Ethernet ICs, QFN-32-EP(5x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip-uart-485-232",
    "ksz8091mnxca",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ksz8091mnxca.kicad_sym",
    "ksz8091mnxca.kicad_mod",
    "ksz8091mnxca.glb",
    "ksz8091mnxca.step",
    "ksz8091mnxca.lbr",
    "docs/hero.png",
    "docs/ksz8091mnxca-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ksz8091mnxca-hero.glb",
    "ksz8091mnxca-hero.overlay.json"
  ],
  "component": {
    "mpn": "KSZ8091MNXCA",
    "manufacturer": "Microchip Tech",
    "package": "QFN-32-EP(5x5)",
    "pin_count": 33,
    "category": "Communication Interface Chip/UART/485/232",
    "subcategory": "Ethernet ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/d114de401a20a1f9cb8e07f83bc6853b.pdf",
    "parts": {
      "symbol": "ksz8091mnxca.kicad_sym",
      "footprint": "ksz8091mnxca.kicad_mod",
      "model_3d": "ksz8091mnxca-hero.glb",
      "model_3d_plain": "ksz8091mnxca.glb",
      "model_3d_step": "ksz8091mnxca-etched.step",
      "model_3d_step_plain": "ksz8091mnxca.step",
      "lbr": "ksz8091mnxca.lbr"
    },
    "distributor_links": {
      "lcsc": "C633271",
      "digikey": "576-4356-ND",
      "mouser": "998-KSZ8091MNXCA"
    },
    "distributor_check": {
      "checked_at": "2026-11-21T00:09:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "576-4356-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "998-KSZ8091MNXCA",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin for the device."
      },
      {
        "number": "2",
        "name": "VDD_1.2",
        "type": "power_out",
        "description": "1.2V core VDD supplied by the internal regulator; decouple with 2.2 μF and 0.1 μF capacitors to ground."
      },
      {
        "number": "3",
        "name": "VDDA_3.3",
        "type": "power_in",
        "description": "3.3V analog VDD; connect to the board 3.3V supply through a ferrite bead and decouple with 22 μF and 0.1 μF capacitors to ground."
      },
      {
        "number": "4",
        "name": "RXM",
        "type": "bidirectional",
        "description": "Physical receive or transmit signal, negative differential pair."
      },
      {
        "number": "5",
        "name": "RXP",
        "type": "bidirectional",
        "description": "Physical receive or transmit signal, positive differential pair."
      },
      {
        "number": "6",
        "name": "TXM",
        "type": "bidirectional",
        "description": "Physical transmit or receive signal, negative differential pair."
      },
      {
        "number": "7",
        "name": "TXP",
        "type": "bidirectional",
        "description": "Physical transmit or receive signal, positive differential pair."
      },
      {
        "number": "8",
        "name": "XO",
        "type": "output",
        "description": "Crystal feedback for the 25 MHz crystal; no connect if an oscillator or external clock source is used."
      },
      {
        "number": "9",
        "name": "XI",
        "type": "input",
        "description": "Crystal, oscillator or external clock input at 25 MHz ±50 ppm."
      },
      {
        "number": "10",
        "name": "REXT",
        "type": "input",
        "description": "Sets the PHY transmit output current; connect a 6.49 kΩ resistor to ground on this pin."
      },
      {
        "number": "11",
        "name": "MDIO",
        "type": "bidirectional",
        "description": "MII management data I/O with a weak pull-up, open-drain output, and a required external 1.0 kΩ pull-up resistor."
      },
      {
        "number": "12",
        "name": "MDC",
        "type": "input",
        "description": "MII management clock input, synchronous to the MDIO data pin."
      },
      {
        "number": "13",
        "name": "RXD3/PHYAD0",
        "type": "bidirectional",
        "description": "MII receive data output bit 3; in config mode the pull-up/pull-down is latched as PHYADDR[0] at reset de-assertion."
      },
      {
        "number": "14",
        "name": "RXD2/PHYAD1",
        "type": "bidirectional",
        "description": "MII receive data output bit 2; in config mode the pull-up/pull-down is latched as PHYADDR[1] at reset de-assertion."
      },
      {
        "number": "15",
        "name": "RXD1/PHYAD2",
        "type": "bidirectional",
        "description": "MII receive data output bit 1; in config mode the pull-up/pull-down is latched as PHYADDR[2] at reset de-assertion."
      },
      {
        "number": "16",
        "name": "RXD0/DUPLEX",
        "type": "bidirectional",
        "description": "MII receive data output bit 0; in config mode the pull-up/pull-down is latched as DUPLEX at reset de-assertion."
      },
      {
        "number": "17",
        "name": "VDDIO",
        "type": "power_in",
        "description": "3.3V, 2.5V, or 1.8V digital VDD; decouple with 22 μF and 0.1 μF capacitors to ground."
      },
      {
        "number": "18",
        "name": "RXDV/CONFIG2",
        "type": "bidirectional",
        "description": "MII receive data valid output; in config mode it is latched as CONFIG2 at reset de-assertion."
      },
      {
        "number": "19",
        "name": "RXC/B-CAST_OFF",
        "type": "bidirectional",
        "description": "MII receive clock output; in config mode it is latched as B-CAST_OFF at reset de-assertion."
      },
      {
        "number": "20",
        "name": "RXER/ISO",
        "type": "bidirectional",
        "description": "MII receive error output; in config mode it is latched as ISOLATE at reset de-assertion."
      },
      {
        "number": "21",
        "name": "INTRP/PME_N2/NAND_Tree#",
        "type": "bidirectional",
        "description": "Programmable interrupt output, active low by default, with a weak pull-up, open-drain output, and a required 1.0 kΩ pull-up to VDDIO for interrupt and PME functions."
      },
      {
        "number": "22",
        "name": "TXC/PME_EN",
        "type": "bidirectional",
        "description": "MII transmit clock output; no connection in MII back-to-back mode, and latched as PME_EN in config mode."
      },
      {
        "number": "23",
        "name": "TXEN",
        "type": "input",
        "description": "MII transmit enable input."
      },
      {
        "number": "24",
        "name": "TXD0",
        "type": "input",
        "description": "MII transmit data input bit 0, synchronous to TXC."
      },
      {
        "number": "25",
        "name": "TXD1",
        "type": "input",
        "description": "MII transmit data input bit 1, synchronous to TXC."
      },
      {
        "number": "26",
        "name": "TXD2",
        "type": "input",
        "description": "MII transmit data input bit 2, synchronous to TXC."
      },
      {
        "number": "27",
        "name": "TXD3",
        "type": "input",
        "description": "MII transmit data input bit 3, synchronous to TXC."
      },
      {
        "number": "28",
        "name": "COL/CONFIG0",
        "type": "bidirectional",
        "description": "MII collision detect output; in config mode it is latched as CONFIG0 at reset de-assertion."
      },
      {
        "number": "29",
        "name": "CRS/CONFIG1",
        "type": "bidirectional",
        "description": "MII carrier sense output; in config mode it is latched as CONFIG1 at reset de-assertion and serves as the NAND tree output."
      },
      {
        "number": "30",
        "name": "LED0/PME_N1/NWAYEN",
        "type": "bidirectional",
        "description": "Programmable LED0 output; in config mode it is latched as auto-negotiation enable at reset de-assertion, and can serve as an open-drain PME_N output needing a 1.0 kΩ pull-up to VDDIO."
      },
      {
        "number": "31",
        "name": "TXER",
        "type": "input",
        "description": "MII transmit error input; must be pulled high by a pull-up resistor for NAND tree testing."
      },
      {
        "number": "32",
        "name": "RST#",
        "type": "input",
        "description": "Chip reset, active low, with an internal weak pull-up."
      },
      {
        "number": "33",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MPN KSZ8091MNXCA maps to the MII variant (KSZ8091MNX) in this excerpt. The 'CA' suffix is not define"
        ],
        "pages_sent": 36,
        "cost_usd": 0.0568,
        "at": "2026-11-21T00:09:50"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/d114de401a20a1f9cb8e07f83bc6853b.pdf",
        "pages": 80,
        "sha256": "a7e3aab56aae2ff4",
        "source_tier": "mfr",
        "citation": "Microchip Tech datasheet, copy hosted by LCSC"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 33,
        "described": 33,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ksz8091mnxca.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "5fa713ea46b36980895812ed853577889b7cb06d275041a39b99bc0be305dc79",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ksz8091mnxca-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5.0,
          5.0,
          0.875
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4f73a026b58184b170fa173ffc14d75f7f73865aaa267ec7d7cc417789f7d1cf",
        "checked": "2026-11-21",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}