main
History Download
Ray Publish 0.1.0 816b47a

KSZ8061RNBW

Microchip Tech · Pre-ordered MCUs · QFN-32-EP(5x5)

KSZ8061RNBW from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 XI input KSZ8061RNB: 25-MHz crystal/oscillator/external clock input, referenced to the AVDDH supply.
2 XO output KSZ8061RNB: crystal feedback for the 25-MHz crystal; no connect if an oscillator or external clock source is used.
3 AVDDH power_in 3.3V supply for the analog TX drivers and the XI/XO oscillator circuit.
4 TXP bidirectional Physical transmit or receive signal (+ differential); transmit in MDI mode, receive in MDI-X mode.
5 TXM bidirectional Physical transmit or receive signal (- differential); transmit in MDI mode, receive in MDI-X mode.
6 RXP bidirectional Physical receive or transmit signal (+ differential); receive in MDI mode, transmit in MDI-X mode.
7 RXM bidirectional Physical receive or transmit signal (- differential); receive in MDI mode, transmit in MDI-X mode.
8 AVDDL power_in 1.2V (nominal) supply for the analog core.
9 VDDL power_in 1.2V (nominal) supply for the digital core.
10 MDIO bidirectional Management Interface (MIIM) data I/O with weak pull-up, open-drain like; requires an external 1-kΩ pull-up resistor.
11 MDC input Management Interface (MIIM) clock input with internal pull-up, synchronous to the MDIO data pin.
12 RXER/QWF output RMII receive error output; at reset deassertion the strap latches QWF (pull-up disables Quiet-Wire filtering, pull-down default enables it).
13 CRS_DV/CONFIG2 output RMII carrier sense/receive data valid output; the pull-up or pull-down value is latched as CONFIG2 at reset deassertion.
14 PHYAD0 bidirectional No function in normal operation; the pull-up or pull-down value is latched as PHYADDR[0] at reset deassertion.
15 VDDIO power_in 3.3V or 2.5V supply for digital I/O.
16 PHYAD1 bidirectional No function in normal operation; the pull-up or pull-down value is latched as PHYADDR[1] at reset deassertion.
17 RXD1/PHYAD2 output RMII receive data output [1]; the pull-up or pull-down value is latched as PHYADDR[2] at reset deassertion.
18 RXD0/AUTONEG output RMII receive data output [0]; strap latched at reset deassertion as AUTONEG (pull-up default disables, pull-down enables auto-negotiation).
19 REF_CLK/CONFIG0 output KSZ8061RNB: RMII 50-MHz reference clock output to the MAC; the pull-up or pull-down value is latched as CONFIG0 at reset deassertion.
20 LED1 output LED1 output, active low and programmable; by default indicates link speed.
21 TXEN input RMII transmit enable input.
22 TXD0 input RMII transmit data input [0].
23 TXD1 input RMII transmit data input [1].
24 LED0 output LED0 output, active low and programmable; by default indicates link/activity.
25 DNU input Do not use; this unused input must be pulled to a logic-low level.
26 DNU input Do not use; this unused input should be pulled to a logic-low level.
27 CONFIG1 bidirectional No function in normal operation; the pull-up or pull-down value is latched as CONFIG1 at reset deassertion (also NAND tree output).
28 RESET# input Chip reset, active low, with internal pull-up.
29 INTRP/NAND_TREE# bidirectional Programmable interrupt output (active-low default or active-high), open-drain like, requires external 1.0-kΩ pull-up; strap latches NAND_Tree# at reset deassertion.
30 VDDL power_in 1.2V (nominal) supply for digital (and analog).
31 REXT input Sets PHY transmit output current; connect a 6.04 kΩ 1% resistor from this pin to ground.
32 SIGDET output Signal detect output, active-high.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-32-EP(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDDIO, AVDDH (abs max) -0.5 5 V VDDIO, AVDDH 38
Supply Voltage VDDL, AVDDL (abs max) -0.5 1.8 V VDDL, AVDDL 38
Input Voltage (abs max) -0.5 5 V all inputs 38
Output Voltage (abs max) -0.5 5 V all inputs (as printed) 38
Lead Temperature 260 °C soldering, 10 sec 38
Storage Temperature TS -55 150 °C 38
HBM ESD Rating 5 kV 38
AVDDH supply AVDDH 3.135 3.3 3.465 V AVDDH @ 3.3V 38
VDDIO supply 3.3V VDDIO 3.135 3.3 3.465 V VDDIO @ 3.3V 38
VDDIO supply 2.5V VDDIO 2.375 2.5 2.625 V VDDIO @ 2.5V 38
Core supply VDDL, AVDDL 1.14 1.2 1.26 V VDDL, AVDDL 38
Ambient Temperature, Industrial TA -40 85 °C Industrial 38
Ambient Temperature, Extended TA -40 105 °C Extended 38
Maximum Junction Temperature TJ max 125 °C 38
Thermal Resistance junction-case ϴJC 6 °C/W 32-QFN, 32-WQFN 38
Input High Voltage VIH 2 V VDDIO = 3.3V 40
Input High Voltage VIH 1.5 V VDDIO = 2.5V 40
Input Low Voltage VIL 1.3 V VDDIO = 3.3V 40
Input Low Voltage VIL 1 V VDDIO = 2.5V 40
Input Current /IIN/ 10 µA VIN = GND ~ VDDIO 40
Output High Voltage VOH 2.4 V VDDIO = 3.3V, IOH = 12 mA 40
Output High Voltage VOH 2 V VDDIO = 2.5V, IOH = 6 mA 40
Output Low Voltage VOL 0.4 V VDDIO = 3.3V, IOL = 6 mA 40
Output Tri-State Leakage /IOZ/ 10 µA VOUT = GND ~ VDDIO 41
100BASE-TX Peak Differential Output Voltage VO 0.95 1.05 V 100Ω termination across differential output 41
100BASE-TX Output Voltage Imbalance VIMB 2 % 100Ω termination across differential output 41
100BASE-TX Rise/Fall Time tr/tf 3 5 ns 41
100BASE-TX Rise/Fall Time Imbalance 0 0.5 ns 41
100BASE-TX Duty Cycle Distortion 0.25 ns printed as ±0.25 41
100BASE-TX Overshoot 5 % 41
10BASE-T Peak Differential Output Voltage VP 2.2 2.8 V 100Ω termination across differential output 41
10BASE-T Jitter Added 3.5 ns Peak-to-peak 41
RMII Setup time t1 4 ns 42
RMII Hold time t2 2 ns 42
RMII Output delay tOD 7 10 13 ns 42
RMII Clock period tCYC 20 ns 42
1.2V Current VDDL+AVDDL ICORE 45 mA 100BASE-TX full-duplex at 100% utilization 39
3.3V Current for Transceiver IAVDDH_3.3 24 mA 100BASE-TX full-duplex at 100% utilization 40
3.3V Current for Digital I/Os IVDDIO_3.3 11 mA 100BASE-TX full-duplex at 100% utilization 40
Internal Pull-Up Resistance pu 33 kΩ VDDIO = 3.3V, external 4.7-kΩ pull-down 41
Internal Pull-Down Resistance pd 36 kΩ VDDIO = 3.3V, external 4.7-kΩ pull-up 41
10BASE-T Squelch Threshold VSQ 400 mV 5 MHz square wave 41
Link Loss Reaction Time tllr 4.8 µs Link loss detected at receive differential inputs to PHY signal indication time 41

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing abs • Priority 4: 10BASE-T, half-duplex RND to establish a link by listening for a fixed signal protocol in the absence of auto-negotiation advertisement protocol. 10

CAD (KiCad official)

  • Symbol: KSZ8061RNBW
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: ksz8061rnbw-etched.step / ksz8061rnbw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz8061rnbw.step / ksz8061rnbw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 250ae95c05aef2e6, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF