Generated by kicad-footprint-generator · KiCad file format 20260206
KSZ8061RNBW
Microchip Tech · Pre-ordered MCUs · QFN-32-EP(5x5)
KSZ8061RNBW from Microchip Tech, in a QFN-32-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | XI | input | KSZ8061RNB: 25-MHz crystal/oscillator/external clock input, referenced to the AVDDH supply. |
| 2 | XO | output | KSZ8061RNB: crystal feedback for the 25-MHz crystal; no connect if an oscillator or external clock source is used. |
| 3 | AVDDH | power_in | 3.3V supply for the analog TX drivers and the XI/XO oscillator circuit. |
| 4 | TXP | bidirectional | Physical transmit or receive signal (+ differential); transmit in MDI mode, receive in MDI-X mode. |
| 5 | TXM | bidirectional | Physical transmit or receive signal (- differential); transmit in MDI mode, receive in MDI-X mode. |
| 6 | RXP | bidirectional | Physical receive or transmit signal (+ differential); receive in MDI mode, transmit in MDI-X mode. |
| 7 | RXM | bidirectional | Physical receive or transmit signal (- differential); receive in MDI mode, transmit in MDI-X mode. |
| 8 | AVDDL | power_in | 1.2V (nominal) supply for the analog core. |
| 9 | VDDL | power_in | 1.2V (nominal) supply for the digital core. |
| 10 | MDIO | bidirectional | Management Interface (MIIM) data I/O with weak pull-up, open-drain like; requires an external 1-kΩ pull-up resistor. |
| 11 | MDC | input | Management Interface (MIIM) clock input with internal pull-up, synchronous to the MDIO data pin. |
| 12 | RXER/QWF | output | RMII receive error output; at reset deassertion the strap latches QWF (pull-up disables Quiet-Wire filtering, pull-down default enables it). |
| 13 | CRS_DV/CONFIG2 | output | RMII carrier sense/receive data valid output; the pull-up or pull-down value is latched as CONFIG2 at reset deassertion. |
| 14 | PHYAD0 | bidirectional | No function in normal operation; the pull-up or pull-down value is latched as PHYADDR[0] at reset deassertion. |
| 15 | VDDIO | power_in | 3.3V or 2.5V supply for digital I/O. |
| 16 | PHYAD1 | bidirectional | No function in normal operation; the pull-up or pull-down value is latched as PHYADDR[1] at reset deassertion. |
| 17 | RXD1/PHYAD2 | output | RMII receive data output [1]; the pull-up or pull-down value is latched as PHYADDR[2] at reset deassertion. |
| 18 | RXD0/AUTONEG | output | RMII receive data output [0]; strap latched at reset deassertion as AUTONEG (pull-up default disables, pull-down enables auto-negotiation). |
| 19 | REF_CLK/CONFIG0 | output | KSZ8061RNB: RMII 50-MHz reference clock output to the MAC; the pull-up or pull-down value is latched as CONFIG0 at reset deassertion. |
| 20 | LED1 | output | LED1 output, active low and programmable; by default indicates link speed. |
| 21 | TXEN | input | RMII transmit enable input. |
| 22 | TXD0 | input | RMII transmit data input [0]. |
| 23 | TXD1 | input | RMII transmit data input [1]. |
| 24 | LED0 | output | LED0 output, active low and programmable; by default indicates link/activity. |
| 25 | DNU | input | Do not use; this unused input must be pulled to a logic-low level. |
| 26 | DNU | input | Do not use; this unused input should be pulled to a logic-low level. |
| 27 | CONFIG1 | bidirectional | No function in normal operation; the pull-up or pull-down value is latched as CONFIG1 at reset deassertion (also NAND tree output). |
| 28 | RESET# | input | Chip reset, active low, with internal pull-up. |
| 29 | INTRP/NAND_TREE# | bidirectional | Programmable interrupt output (active-low default or active-high), open-drain like, requires external 1.0-kΩ pull-up; strap latches NAND_Tree# at reset deassertion. |
| 30 | VDDL | power_in | 1.2V (nominal) supply for digital (and analog). |
| 31 | REXT | input | Sets PHY transmit output current; connect a 6.04 kΩ 1% resistor from this pin to ground. |
| 32 | SIGDET | output | Signal detect output, active-high. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-32-EP(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage VDDIO, AVDDH (abs max) | -0.5 | 5 | V | VDDIO, AVDDH | 38 | ||
| Supply Voltage VDDL, AVDDL (abs max) | -0.5 | 1.8 | V | VDDL, AVDDL | 38 | ||
| Input Voltage (abs max) | -0.5 | 5 | V | all inputs | 38 | ||
| Output Voltage (abs max) | -0.5 | 5 | V | all inputs (as printed) | 38 | ||
| Lead Temperature | 260 | °C | soldering, 10 sec | 38 | |||
| Storage Temperature | TS | -55 | 150 | °C | 38 | ||
| HBM ESD Rating | 5 | kV | 38 | ||||
| AVDDH supply | AVDDH | 3.135 | 3.3 | 3.465 | V | AVDDH @ 3.3V | 38 |
| VDDIO supply 3.3V | VDDIO | 3.135 | 3.3 | 3.465 | V | VDDIO @ 3.3V | 38 |
| VDDIO supply 2.5V | VDDIO | 2.375 | 2.5 | 2.625 | V | VDDIO @ 2.5V | 38 |
| Core supply | VDDL, AVDDL | 1.14 | 1.2 | 1.26 | V | VDDL, AVDDL | 38 |
| Ambient Temperature, Industrial | TA | -40 | 85 | °C | Industrial | 38 | |
| Ambient Temperature, Extended | TA | -40 | 105 | °C | Extended | 38 | |
| Maximum Junction Temperature | TJ max | 125 | °C | 38 | |||
| Thermal Resistance junction-case | ϴJC | 6 | °C/W | 32-QFN, 32-WQFN | 38 | ||
| Input High Voltage | VIH | 2 | V | VDDIO = 3.3V | 40 | ||
| Input High Voltage | VIH | 1.5 | V | VDDIO = 2.5V | 40 | ||
| Input Low Voltage | VIL | 1.3 | V | VDDIO = 3.3V | 40 | ||
| Input Low Voltage | VIL | 1 | V | VDDIO = 2.5V | 40 | ||
| Input Current | /IIN/ | 10 | µA | VIN = GND ~ VDDIO | 40 | ||
| Output High Voltage | VOH | 2.4 | V | VDDIO = 3.3V, IOH = 12 mA | 40 | ||
| Output High Voltage | VOH | 2 | V | VDDIO = 2.5V, IOH = 6 mA | 40 | ||
| Output Low Voltage | VOL | 0.4 | V | VDDIO = 3.3V, IOL = 6 mA | 40 | ||
| Output Tri-State Leakage | /IOZ/ | 10 | µA | VOUT = GND ~ VDDIO | 41 | ||
| 100BASE-TX Peak Differential Output Voltage | VO | 0.95 | 1.05 | V | 100Ω termination across differential output | 41 | |
| 100BASE-TX Output Voltage Imbalance | VIMB | 2 | % | 100Ω termination across differential output | 41 | ||
| 100BASE-TX Rise/Fall Time | tr/tf | 3 | 5 | ns | 41 | ||
| 100BASE-TX Rise/Fall Time Imbalance | 0 | 0.5 | ns | 41 | |||
| 100BASE-TX Duty Cycle Distortion | 0.25 | ns | printed as ±0.25 | 41 | |||
| 100BASE-TX Overshoot | 5 | % | 41 | ||||
| 10BASE-T Peak Differential Output Voltage | VP | 2.2 | 2.8 | V | 100Ω termination across differential output | 41 | |
| 10BASE-T Jitter Added | 3.5 | ns | Peak-to-peak | 41 | |||
| RMII Setup time | t1 | 4 | ns | 42 | |||
| RMII Hold time | t2 | 2 | ns | 42 | |||
| RMII Output delay | tOD | 7 | 10 | 13 | ns | 42 | |
| RMII Clock period | tCYC | 20 | ns | 42 | |||
| 1.2V Current VDDL+AVDDL | ICORE | 45 | mA | 100BASE-TX full-duplex at 100% utilization | 39 | ||
| 3.3V Current for Transceiver | IAVDDH_3.3 | 24 | mA | 100BASE-TX full-duplex at 100% utilization | 40 | ||
| 3.3V Current for Digital I/Os | IVDDIO_3.3 | 11 | mA | 100BASE-TX full-duplex at 100% utilization | 40 | ||
| Internal Pull-Up Resistance | pu | 33 | kΩ | VDDIO = 3.3V, external 4.7-kΩ pull-down | 41 | ||
| Internal Pull-Down Resistance | pd | 36 | kΩ | VDDIO = 3.3V, external 4.7-kΩ pull-up | 41 | ||
| 10BASE-T Squelch Threshold | VSQ | 400 | mV | 5 MHz square wave | 41 | ||
| Link Loss Reaction Time | tllr | 4.8 | µs | Link loss detected at receive differential inputs to PHY signal indication time | 41 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | abs | • Priority 4: 10BASE-T, half-duplex RND to establish a link by listening for a fixed signal protocol in the absence of auto-negotiation advertisement protocol. | 10 |
CAD (KiCad official)
- Symbol:
KSZ8061RNBW - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: QFN-32-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
ksz8061rnbw-etched.step/ksz8061rnbw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ksz8061rnbw.step/ksz8061rnbw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (58 pp, sha256
250ae95c05aef2e6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).