main
History Download
Ray Publish 0.1.0 198ea14

KSZ8041RNL

Microchip Tech · Ethernet Transceivers · VQFN-32(5x5)

KSZ8041RNL from Microchip Tech, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground.
2 VDDPLL_1.8 power_in 1.8V analog VDD for the internal PLL; decouple with 1.0-µF and 0.1-µF capacitors to ground.
3 VDDA_3.3 power_in 3.3V analog VDD; connect to the board's 3.3V supply through a ferrite bead.
4 RX- bidirectional Physical receive or transmit signal, negative differential (twisted-pair RX-/TX- signal, pair to be used with an isolation transformer).
5 RX+ bidirectional Physical receive or transmit signal, positive differential.
6 TX- bidirectional Physical transmit or receive signal, negative differential.
7 TX+ bidirectional Physical transmit or receive signal, positive differential.
8 XO output Crystal feedback for 25-MHz crystal; no connect if an oscillator or external clock source is used.
9 XI input Crystal/oscillator/external clock input, 25 MHz ±50 ppm.
10 REXT bidirectional Sets physical transmit output current; connect a 6.49-kΩ resistor in parallel with a 100-pF capacitor to ground on this pin.
11 MDIO bidirectional Management Interface (MII) data I/O; requires an external 4.7-kΩ pull-up resistor.
12 MDC input Management Interface (MII) clock input, synchronous to the MDIO data interface.
13 PHYAD0 bidirectional Pull-up/pull-down value is latched as PHYADDR[0] at power-up or reset (default pull-up strap, see strap-in option).
14 PHYAD1 bidirectional Pull-up/pull-down value is latched as PHYADDR[1] at power-up or reset (see strap-in option).
15 RXD1/PHYAD2 bidirectional RMII receive data output [1], synchronous to REF_CLK; in config mode the pull-up/pull-down is latched as PHYADDR[2] at power-up or reset.
16 RXD0/DUPLEX bidirectional RMII receive data output [0], synchronous to REF_CLK; in config mode latched as DUPLEX (register 0h, bit 8) at power-up or reset.
17 VDDIO_3.3 power_in 3.3V digital VDD; connect to the board's 3.3V supply.
18 CRSDV/CONFIG2 bidirectional RMII carrier sense/receive data valid output; in config mode the pull-up/pull-down is latched as CONFIG2 at power-up or reset.
19 REF_CLK output 50-MHz RMII reference clock output to the MAC, generated by the KSZ8041RNL.
20 RXER/RX_ER/ISO bidirectional RMII receive error output; in config mode the pull-up/pull-down is latched as ISOLATE at power-up or reset (pull-up enables isolate).
21 INTRP output Programmable interrupt output, controlled by register 1Bh; register 1Fh bit 9 sets it active low (default) or active high.
22 NC unconnected No connect.
23 TX_EN input RMII transmit enable input from the MAC.
24 TXD0 input RMII transmit data input [0], synchronous to REF_CLK.
25 TXD1 input RMII transmit data input [1], synchronous to REF_CLK.
26 NC unconnected No connect.
27 NC unconnected No connect.
28 CONFIG0 bidirectional Pull-up/pull-down value is latched as CONFIG0 at power-up or reset to select the interface mode.
29 CONFIG1 bidirectional Pull-up/pull-down value is latched as CONFIG1 at power-up or reset to select the interface mode.
30 LED0/NWAYEN bidirectional Programmable LED0 output (register 1Eh bits [15:14]); in config mode latched as Auto-Negotiation Enable (register 0h, bit 12) at power-up or reset.
31 LED1/SPEED bidirectional Programmable LED1 output (register 1Eh bits [15:14]); in config mode latched as SPEED (register 0h, bit 13) at power-up or reset.
32 RST# input Chip reset, active low.
33 PADDLE GND passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package VQFN-32(5x5)
Category Interface
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDDPLL_1.8) -0.5 2.4 V 38
Supply Voltage (VDDPLL_3.3, VDDPLL_3.3) -0.5 4 V 38
Input Voltage (all inputs) -0.5 4 V 38
Output Voltage (all outputs) -0.5 4 V 38
Storage Temperature (TS) TS -55 150 °C 38
ESD Performance Rating 6 kV Human body model, 1.5 kΩ in series with 100 pF (Note 5-2) 38
Supply Voltage (VDDIO_3.3, VDDA_3.3) 3.135 3.465 V 38
Ambient Temperature (TA, Commercial) TA 0 70 °C Commercial grade 38
Maximum Junction Temperature (TJ maximum) TJ 125 °C 38
Input High Voltage VIH 2 V 39
Input Low Voltage VIL 0.8 V 39
Input Current IIN -10 10 µA VIN = GND ~ VDDIO 39
Output High Voltage VOH 2.4 V IOH = 4 mA 39
Output Low Voltage VOL 0.4 V IOL = 4 mA 39
Output Tri-State Leakage /Ioz/ 10 µA 39
Peak Differential Output Voltage (100BASE-TX) VO 0.95 1.05 V 100 termination across differential output 39
Output Voltage Imbalance (100BASE-TX) VIMB 2 % 100 termination across differential output 39
Rise/Fall Time (100BASE-TX) tr, tf 3 5 ns 39
Rise/Fall Time Imbalance (100BASE-TX) 0 0.5 ns 39
Duty Cycle Distortion (100BASE-TX) 0.25 ns 39
Overshoot (100BASE-TX) 5 % 39
Output Jitter Peak-to-peak (100BASE-TX) 0.7 1.4 ns 39
Peak Differential Output Voltage (10BASE-T) VP 2.2 2.8 V 100 termination across differential output 39
Jitter Added Peak-to-peak (10BASE-T) 3.5 ns 39
Thermal Resistance (JC) JC 6 °C/W 38

CAD (KiCad official)

  • Symbol: KSZ8041RNL
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: ksz8041rnl-etched.step / ksz8041rnl-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ksz8041rnl.step / ksz8041rnl.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (58 pp, sha256 e4c760d80fa0cd50, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF