Generated by kicad-footprint-generator · KiCad file format 20260206
KSZ8041RNL
Microchip Tech · Ethernet Transceivers · VQFN-32(5x5)
KSZ8041RNL from Microchip Tech, in a VQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground. |
| 2 | VDDPLL_1.8 | power_in | 1.8V analog VDD for the internal PLL; decouple with 1.0-µF and 0.1-µF capacitors to ground. |
| 3 | VDDA_3.3 | power_in | 3.3V analog VDD; connect to the board's 3.3V supply through a ferrite bead. |
| 4 | RX- | bidirectional | Physical receive or transmit signal, negative differential (twisted-pair RX-/TX- signal, pair to be used with an isolation transformer). |
| 5 | RX+ | bidirectional | Physical receive or transmit signal, positive differential. |
| 6 | TX- | bidirectional | Physical transmit or receive signal, negative differential. |
| 7 | TX+ | bidirectional | Physical transmit or receive signal, positive differential. |
| 8 | XO | output | Crystal feedback for 25-MHz crystal; no connect if an oscillator or external clock source is used. |
| 9 | XI | input | Crystal/oscillator/external clock input, 25 MHz ±50 ppm. |
| 10 | REXT | bidirectional | Sets physical transmit output current; connect a 6.49-kΩ resistor in parallel with a 100-pF capacitor to ground on this pin. |
| 11 | MDIO | bidirectional | Management Interface (MII) data I/O; requires an external 4.7-kΩ pull-up resistor. |
| 12 | MDC | input | Management Interface (MII) clock input, synchronous to the MDIO data interface. |
| 13 | PHYAD0 | bidirectional | Pull-up/pull-down value is latched as PHYADDR[0] at power-up or reset (default pull-up strap, see strap-in option). |
| 14 | PHYAD1 | bidirectional | Pull-up/pull-down value is latched as PHYADDR[1] at power-up or reset (see strap-in option). |
| 15 | RXD1/PHYAD2 | bidirectional | RMII receive data output [1], synchronous to REF_CLK; in config mode the pull-up/pull-down is latched as PHYADDR[2] at power-up or reset. |
| 16 | RXD0/DUPLEX | bidirectional | RMII receive data output [0], synchronous to REF_CLK; in config mode latched as DUPLEX (register 0h, bit 8) at power-up or reset. |
| 17 | VDDIO_3.3 | power_in | 3.3V digital VDD; connect to the board's 3.3V supply. |
| 18 | CRSDV/CONFIG2 | bidirectional | RMII carrier sense/receive data valid output; in config mode the pull-up/pull-down is latched as CONFIG2 at power-up or reset. |
| 19 | REF_CLK | output | 50-MHz RMII reference clock output to the MAC, generated by the KSZ8041RNL. |
| 20 | RXER/RX_ER/ISO | bidirectional | RMII receive error output; in config mode the pull-up/pull-down is latched as ISOLATE at power-up or reset (pull-up enables isolate). |
| 21 | INTRP | output | Programmable interrupt output, controlled by register 1Bh; register 1Fh bit 9 sets it active low (default) or active high. |
| 22 | NC | unconnected | No connect. |
| 23 | TX_EN | input | RMII transmit enable input from the MAC. |
| 24 | TXD0 | input | RMII transmit data input [0], synchronous to REF_CLK. |
| 25 | TXD1 | input | RMII transmit data input [1], synchronous to REF_CLK. |
| 26 | NC | unconnected | No connect. |
| 27 | NC | unconnected | No connect. |
| 28 | CONFIG0 | bidirectional | Pull-up/pull-down value is latched as CONFIG0 at power-up or reset to select the interface mode. |
| 29 | CONFIG1 | bidirectional | Pull-up/pull-down value is latched as CONFIG1 at power-up or reset to select the interface mode. |
| 30 | LED0/NWAYEN | bidirectional | Programmable LED0 output (register 1Eh bits [15:14]); in config mode latched as Auto-Negotiation Enable (register 0h, bit 12) at power-up or reset. |
| 31 | LED1/SPEED | bidirectional | Programmable LED1 output (register 1Eh bits [15:14]); in config mode latched as SPEED (register 0h, bit 13) at power-up or reset. |
| 32 | RST# | input | Chip reset, active low. |
| 33 | PADDLE GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | VQFN-32(5x5) |
| Category | Interface |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VDDPLL_1.8) | -0.5 | 2.4 | V | 38 | |||
| Supply Voltage (VDDPLL_3.3, VDDPLL_3.3) | -0.5 | 4 | V | 38 | |||
| Input Voltage (all inputs) | -0.5 | 4 | V | 38 | |||
| Output Voltage (all outputs) | -0.5 | 4 | V | 38 | |||
| Storage Temperature (TS) | TS | -55 | 150 | °C | 38 | ||
| ESD Performance Rating | 6 | kV | Human body model, 1.5 kΩ in series with 100 pF (Note 5-2) | 38 | |||
| Supply Voltage (VDDIO_3.3, VDDA_3.3) | 3.135 | 3.465 | V | 38 | |||
| Ambient Temperature (TA, Commercial) | TA | 0 | 70 | °C | Commercial grade | 38 | |
| Maximum Junction Temperature (TJ maximum) | TJ | 125 | °C | 38 | |||
| Input High Voltage | VIH | 2 | V | 39 | |||
| Input Low Voltage | VIL | 0.8 | V | 39 | |||
| Input Current | IIN | -10 | 10 | µA | VIN = GND ~ VDDIO | 39 | |
| Output High Voltage | VOH | 2.4 | V | IOH = 4 mA | 39 | ||
| Output Low Voltage | VOL | 0.4 | V | IOL = 4 mA | 39 | ||
| Output Tri-State Leakage | /Ioz/ | 10 | µA | 39 | |||
| Peak Differential Output Voltage (100BASE-TX) | VO | 0.95 | 1.05 | V | 100 termination across differential output | 39 | |
| Output Voltage Imbalance (100BASE-TX) | VIMB | 2 | % | 100 termination across differential output | 39 | ||
| Rise/Fall Time (100BASE-TX) | tr, tf | 3 | 5 | ns | 39 | ||
| Rise/Fall Time Imbalance (100BASE-TX) | 0 | 0.5 | ns | 39 | |||
| Duty Cycle Distortion (100BASE-TX) | 0.25 | ns | 39 | ||||
| Overshoot (100BASE-TX) | 5 | % | 39 | ||||
| Output Jitter Peak-to-peak (100BASE-TX) | 0.7 | 1.4 | ns | 39 | |||
| Peak Differential Output Voltage (10BASE-T) | VP | 2.2 | 2.8 | V | 100 termination across differential output | 39 | |
| Jitter Added Peak-to-peak (10BASE-T) | 3.5 | ns | 39 | ||||
| Thermal Resistance (JC) | JC | 6 | °C/W | 38 |
CAD (KiCad official)
- Symbol:
KSZ8041RNL - Footprint:
Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm - 3D model: VQFN-32(5x5) (KiCad packages3D, STEP)
- 3D model files:
ksz8041rnl-etched.step/ksz8041rnl-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ksz8041rnl.step/ksz8041rnl.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (58 pp, sha256
e4c760d80fa0cd50, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).