main
Ray
Publish 0.1.0
85cd88e
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162
{
"slug": "jsm510",
"version": "0.1.0",
"type": "component",
"description": "JSMSEMI Magnetic Sensors, SOT-23. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"jsm510",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"jsm510.kicad_sym",
"jsm510.kicad_mod",
"jsm510.glb",
"jsm510.step",
"jsm510.lbr",
"docs/hero.png",
"docs/jsm510-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"jsm510-hero.glb",
"jsm510-hero.overlay.json",
"jsm510-etched.glb"
],
"component": {
"mpn": "JSM510",
"manufacturer": "JSMSEMI",
"package": "SOT-23",
"pin_count": 3,
"category": "Sensors",
"subcategory": "Magnetic Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a7de728b924a581830eae8778a9f303f.pdf",
"parts": {
"symbol": "jsm510.kicad_sym",
"footprint": "jsm510.kicad_mod",
"model_3d": "jsm510-hero.glb",
"model_3d_plain": "jsm510-etched.glb",
"model_3d_step": "jsm510-etched.step",
"model_3d_step_plain": "jsm510.step",
"lbr": "jsm510.lbr"
},
"distributor_links": {
"lcsc": "C2900621"
},
"distributor_check": {
"checked_at": "2026-10-27T09:36:46Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": null,
"status": "quota"
},
"mouser": {
"pn": null,
"status": "quota"
}
},
"pins": [
{
"number": "1",
"name": "VCC",
"type": "power_in",
"description": "Power supply input, operating range 2.7 V to 30 V for 3-wire devices, with built-in reverse-voltage protection."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground reference for all listed voltages."
},
{
"number": "3",
"name": "Vout",
"type": "output",
"description": "Open-drain output, short-circuit protected, max 30 V and 25 mA recommended, going high-impedance (tri-state) on overtemperature, undervoltage or fault conditions."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin assignment table is shared by TO92S and SOT23 (Fig. 6 pin drawing not available in text); assume; Datasheet covers JSM501-JSM511 family; ordering table lists generic JSM50X in SOT23 and TO92S, so SO"
],
"pages_sent": 15,
"cost_usd": 0.073,
"at": "2026-10-27T09:36:22"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/a7de728b924a581830eae8778a9f303f.pdf",
"pages": 15,
"sha256": "333a21fba79226b2",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 3,
"described": 3,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "jsm510.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.5,
3.0,
1.2
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "dd5d1711204e1d8d26cd11490923bd84340820baa69538c385a4300ec2539bc0",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "jsm510-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.5,
3.0,
1.2
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "2509c6bd53fca7cd8c0e10fdc3da6c39798d665828e801276352e0da7b2a8468",
"checked": "2026-10-27",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}