Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

JSM510

JSMSEMI · Magnetic Sensors · SOT-23

JSM510 from JSMSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Power supply input, operating range 2.7 V to 30 V for 3-wire devices, with built-in reverse-voltage protection.
2 GND power_in Ground reference for all listed voltages.
3 Vout output Open-drain output, short-circuit protected, max 30 V and 25 mA recommended, going high-impedance (tri-state) on overtemperature, undervoltage or fault conditions.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOT-23
Category Sensors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply current Icc 2.5 3.2 mA 3-wire 12
Port low output voltage Vol 0.13 0.4 V IO = 20 mA 12
Port low output voltage Vol 0.5 V IO = 25 mA 12
Output refresh period tsamp 1.6 2 2.66 µs 12
Supply voltage VCC 2.7 30 V 3-wire 12
Ambient temperature range TA -40 150 °C 12
Output voltage VOUT 30 V 12
Output current IOUT 25 mA 12
Output current IO 65 mA 11
Reverse output current IOR 50 mA 11
Ambient temperature range (abs max) TA -40 170 °C t < 96 h, no cumulative stress 11
Human body model ESD VHBM 12 kV according to AEC Q100-002 11
Maximum latch-up free current Ilatch 100 100 mA AEC Q100-004, class 1, any pin 11
Output fall time tf 1 µs Vcc = 12V; RL = 820; CL = 20 pF 12
Output rise time tr 1 µs 12
Output jitter tj 0.5 µs For square wave signal with 1 kHz 12
Delay time td 16 µs 12
Enable time of output after settling of Vcc ten 50 µs VCC = 12V 12
Effective noise of magnetic switching points Bnoise 0.1 mT For square wave signal with 1 kHz 12
Temp. coeff. of magnetic threshold TC 1000 ppm/K JSM510 unipolar 13
On point BON 10 mT JSM510 unipolar 13
Off point BOFF 8 mT JSM510 unipolar 13
Hysteresis BHYS 2 mT JSM510 unipolar 13

CAD (KiCad official)

  • Symbol: JSM510
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23 (KiCad packages3D, STEP)
  • 3D model files: jsm510-etched.step / jsm510-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jsm510.step / jsm510.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (15 pp, sha256 333a21fba79226b2, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF