main
Ray
Publish 0.1.0
85cd88e
JSM510
JSMSEMI · Magnetic Sensors · SOT-23
JSM510 from JSMSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply input, operating range 2.7 V to 30 V for 3-wire devices, with built-in reverse-voltage protection. |
| 2 | GND | power_in | Ground reference for all listed voltages. |
| 3 | Vout | output | Open-drain output, short-circuit protected, max 30 V and 25 mA recommended, going high-impedance (tri-state) on overtemperature, undervoltage or fault conditions. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current | Icc | 2.5 | 3.2 | mA | 3-wire | 12 | |
| Port low output voltage | Vol | 0.13 | 0.4 | V | IO = 20 mA | 12 | |
| Port low output voltage | Vol | 0.5 | V | IO = 25 mA | 12 | ||
| Output refresh period | tsamp | 1.6 | 2 | 2.66 | µs | 12 | |
| Supply voltage | VCC | 2.7 | 30 | V | 3-wire | 12 | |
| Ambient temperature range | TA | -40 | 150 | °C | 12 | ||
| Output voltage | VOUT | 30 | V | 12 | |||
| Output current | IOUT | 25 | mA | 12 | |||
| Output current | IO | 65 | mA | 11 | |||
| Reverse output current | IOR | 50 | mA | 11 | |||
| Ambient temperature range (abs max) | TA | -40 | 170 | °C | t < 96 h, no cumulative stress | 11 | |
| Human body model ESD | VHBM | 12 | kV | according to AEC Q100-002 | 11 | ||
| Maximum latch-up free current | Ilatch | 100 | 100 | mA | AEC Q100-004, class 1, any pin | 11 | |
| Output fall time | tf | 1 | µs | Vcc = 12V; RL = 820; CL = 20 pF | 12 | ||
| Output rise time | tr | 1 | µs | 12 | |||
| Output jitter | tj | 0.5 | µs | For square wave signal with 1 kHz | 12 | ||
| Delay time | td | 16 | µs | 12 | |||
| Enable time of output after settling of Vcc | ten | 50 | µs | VCC = 12V | 12 | ||
| Effective noise of magnetic switching points | Bnoise | 0.1 | mT | For square wave signal with 1 kHz | 12 | ||
| Temp. coeff. of magnetic threshold | TC | 1000 | ppm/K | JSM510 unipolar | 13 | ||
| On point | BON | 10 | mT | JSM510 unipolar | 13 | ||
| Off point | BOFF | 8 | mT | JSM510 unipolar | 13 | ||
| Hysteresis | BHYS | 2 | mT | JSM510 unipolar | 13 |
CAD (KiCad official)
- Symbol:
JSM510 - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files:
jsm510-etched.step/jsm510-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jsm510.step/jsm510.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (15 pp, sha256
333a21fba79226b2, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# JSM510
**JSMSEMI** · Magnetic Sensors · SOT-23
JSM510 from JSMSEMI, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply input, operating range 2.7 V to 30 V for 3-wire devices, with built-in reverse-voltage protection. |
| 2 | GND | power_in | Ground reference for all listed voltages. |
| 3 | Vout | output | Open-drain output, short-circuit protected, max 30 V and 25 mA recommended, going high-impedance (tri-state) on overtemperature, undervoltage or fault conditions. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOT-23 |
| Category | Sensors |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current | Icc | | 2.5 | 3.2 | mA | 3-wire | 12 |
| Port low output voltage | Vol | | 0.13 | 0.4 | V | IO = 20 mA | 12 |
| Port low output voltage | Vol | | | 0.5 | V | IO = 25 mA | 12 |
| Output refresh period | tsamp | 1.6 | 2 | 2.66 | µs | | 12 |
| Supply voltage | VCC | 2.7 | | 30 | V | 3-wire | 12 |
| Ambient temperature range | TA | -40 | | 150 | °C | | 12 |
| Output voltage | VOUT | | | 30 | V | | 12 |
| Output current | IOUT | | | 25 | mA | | 12 |
| Output current | IO | | | 65 | mA | | 11 |
| Reverse output current | IOR | | | 50 | mA | | 11 |
| Ambient temperature range (abs max) | TA | -40 | | 170 | °C | t < 96 h, no cumulative stress | 11 |
| Human body model ESD | VHBM | 12 | | | kV | according to AEC Q100-002 | 11 |
| Maximum latch-up free current | Ilatch | 100 | | 100 | mA | AEC Q100-004, class 1, any pin | 11 |
| Output fall time | tf | | | 1 | µs | Vcc = 12V; RL = 820; CL = 20 pF | 12 |
| Output rise time | tr | | | 1 | µs | | 12 |
| Output jitter | tj | | 0.5 | | µs | For square wave signal with 1 kHz | 12 |
| Delay time | td | | 16 | | µs | | 12 |
| Enable time of output after settling of Vcc | ten | | | 50 | µs | VCC = 12V | 12 |
| Effective noise of magnetic switching points | Bnoise | | 0.1 | | mT | For square wave signal with 1 kHz | 12 |
| Temp. coeff. of magnetic threshold | TC | | 1000 | | ppm/K | JSM510 unipolar | 13 |
| On point | BON | | 10 | | mT | JSM510 unipolar | 13 |
| Off point | BOFF | | 8 | | mT | JSM510 unipolar | 13 |
| Hysteresis | BHYS | | 2 | | mT | JSM510 unipolar | 13 |
## CAD (KiCad official)
- Symbol: `JSM510`
- Footprint: `Package_TO_SOT_SMD:SOT-23`
- 3D model: SOT-23 (KiCad packages3D, STEP)
- 3D model files: `jsm510-etched.step` / `jsm510-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `jsm510.step` / `jsm510.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [JSMSEMI datasheet](docs/jsm510-datasheet.pdf) (15 pp, sha256 `333a21fba79226b2`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/jsm510-datasheet.pdf)