JSM4056

{
 "schema": "adom.pads/1",
 "slug": "jsm4056",
 "footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm",
 "generated_from": {
  "footprint": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm@sha256:5848244c5e72002e",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -1.905
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm@sha256:5848244c5e72002e"
 },
 "pad_count": 9,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 4,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "TS",
   "type": "input",
   "description": "Battery temperature sense/protection input. Connect an external NTC thermistor and resistor divider to set the battery temperature protection window. Internally compared against OTPH (45% x VCC) and OTPL (80% x VCC) thresholds; charging is suspended when VTS is outside this range. Tie to GND to disable the temperature protection function.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "PROG",
   "type": "passive",
   "description": "Charge current program pin. Connect a resistor RPROG from PROG to GND to set the constant charge current per IBAT = 1000 V / RPROG (RPROG >= 0.8 kOhm). Pin voltage is regulated to 1.0 V in constant-current mode and 0.1 V in trickle-charge mode; C/10 termination is detected via this pin.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground / power return.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VCC",
   "type": "power_in",
   "description": "Charger positive supply input (4.5 V typ 5 V, max 5.5 V absolute max 8 V). Powers all internal circuitry. Charging begins when VCC exceeds the UVLO threshold (typ 3.73 V) AND VCC > VBAT + 144 mV; if VCC-VBAT falls below 94 mV the part enters low-power shutdown (IBAT < 3 uA). Decouple with a 2.2 uF ceramic capacitor to GND.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "VBAT",
   "type": "power_out",
   "description": "Battery positive terminal / charge current output. Delivers up to 1000 mA of charge current and regulates the float voltage to 4.2 V (+/-1%). In standby or with VCC removed, BAT leakage is < 3 uA (typ 1 uA). Automatic recharge starts when VBAT falls below VFLOAT - 210 mV.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "STDBY",
   "type": "output",
   "description": "Charge-complete status indicator, open-drain output. Pulled low (VOL ~ 0.3 V at 5 mA) when the charge cycle has terminated to light an external LED; high-impedance during an active charge cycle.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "CHRG",
   "type": "output",
   "description": "Charge status indicator, open-drain output. Pulled low (VOL ~ 0.3 V at 5 mA) while the battery is being charged; goes high-impedance when charging completes. If charger is inserted with no battery attached the LED will blink to indicate the fault.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "CE",
   "type": "input",
   "description": "Chip enable input (absolute max -0.3 to 8 V). Tie to VCC or leave floating for normal operation; tie to GND to shut the chip down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "rect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    2.41,
    3.3
   ],
   "layers": [],
   "thermal": true,
   "pin": "9",
   "name": "EXPOSED PAD",
   "type": "power_in",
   "description": "Exposed thermal pad. Present in the package land pattern; connect it per the manufacturer datasheet thermal recommendation. Added because the footprint carries this pad and the symbol had no pin for it.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}