main
History Download
Ray Publish 0.1.0 97e01e7

ISOW7844DWE

Texas Instruments · Digital Isolators · SOIC-16-300mil

ISOW7844DWE from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage for the primary side, referenced to GND1.
2 GND1 power_in Ground connection for VCC.
3 OUTA output Output channel A.
4 OUTB output Output channel B.
5 OUTC output Output channel C.
6 OUTD output Output channel D.
7 NC unconnected Not connected.
8 GND1 power_in Ground connection for VCC.
9 GND2 power_in Ground connection for VISO.
10 SEL input VISO selection pin: VISO = 5 V when SEL is shorted to VISO; VISO = 3.3 V when SEL is shorted to GND2 or left floating (see Section 9.4).
11 IND input Input channel D.
12 INC input Input channel C.
13 INB input Input channel B.
14 INA input Input channel A.
15 GND2 power_in Ground connection for VISO.
16 VISO power_out Isolated supply voltage, determined by the SEL pin (5 V or 3.3 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC -0.5 6 V 9
Isolated supply voltage VISO -0.5 6 V 9
Voltage at INx, OUTx, SEL pins VIO -0.5 V Printed as VCC + 0.5 / VISO + 0.5; max not numeric, see review 9
Maximum output current through data channels IO -15 15 mA 9
Junction temperature TJ 150 °C 9
Storage temperature Tstg -65 150 °C 9
Supply voltage VCC 3 5.5 V 9
High level output current IOH -4 mA VSO = 5 V 9
High level output current IOH -2 mA VSO = 3.3 V 9
Low level output current IOL 4 mA VSO = 5 V 9
Low level output current IOL 2 mA VSO = 3.3 V 9
Low-level input voltage VIL 0 V Printed as 0.3 × VSI; max not numeric, see review 9
Data rate DR 100 Mbps 9
Ambient temperature TA -40 125 °C 9
Isolated supply voltage VISO 4.75 5.07 5.43 V VCC = 5 V ±10%; External IISO = 0 to 50 mA 13
Isolated supply voltage VISO 4.5 5.07 5.43 V VCC = 5 V ±10%; External IISO = 0 to 130 mA 13
DC line regulation VISO(LINE) 2 mV/V IISO = 50 mA, VCC = 4.5 V to 5.5 V 13
DC load regulation VISO(LOAD) 1 % IISO = 0 to 130 mA 13
Efficiency at maximum load current EFF 53 % IISO = 130 mA, CLOAD = 0.1 µF // 10 µF; VI = VSI (ISOW784x) 13
Low level input current IIL -10 µA VIL = 0 at INx or SEL 13
High level input current IIH 10 µA VIH = VSI at INx or SEL 13
Low level output voltage VOL 0.2 0.4 V IO = 4 mA, see Figure 8-1 13
Common mode transient immunity CMTI 100 kV/us VI = VSI or 0 V, VCM = 1000 V; see Figure 8-2 13
DC current from supply under short circuit on VISO ICC_SC 137 mA VISO shorted to GND2 13
Output ripple on isolated supply (pk-pk) VISO(RIP) 100 mV 20-MHz bandwidth, CLOAD = 0.1 µF // 20 µF, IISO = 130 mA 13
Current drawn from supply ICC 17 mA No external ILOAD; VI = VSI (ISOW7844) 14
Current drawn from supply ICC 24 mA All channels switching, 10 Mbps; CL = 15 pF, No external ILOAD 14
Current available to isolated supply IISO(OUT) 130 mA VI = VSI (ISOW7844) 14
Current available to isolated supply IISO(OUT) 126 mA All channels switching, 1 Mbps; CL = 15 pF 14
Propagation delay time tPLH, tPHL 13 17.6 ns VCC = 5 V ±10%, SEL shorted to VISO; see Figure 8-1 26
Pulse width distortion PWD 0.6 4.7 ns /tPHL, tPLH/; VCC = 5 V ±10%, SEL shorted to VISO 26
Output signal rise and fall times tr, tf 2 4 ns VCC = 5 V ±10%, SEL shorted to VISO 26
Isolated supply voltage VISO 3.13 3.34 3.56 V VCC = 5 V ±10%, SEL shorted to GND2; External IISO = 0 to 50 mA 18
Isolated supply voltage VISO 3 3.34 3.56 V VCC = 5 V ±10%, SEL shorted to GND2; External IISO = 0 to 130 mA 18
Efficiency at maximum load current EFF 48 % IISO = 130 mA, CLOAD = 0.1 µF // 10 µF; VI = VSI (ISOW784x) 18
Low level output voltage VOL 0.1 0.3 V IO = 2 mA, see Figure 8-1 18
Current drawn from supply ICC 21 mA VCC = 5 V ±10%, SEL shorted to GND2; No external ILOAD; VI = 0 V (ISOW7844) 20
Propagation delay time tPLH, tPHL 14 19.7 ns VCC = 5 V ±10%, SEL shorted to GND2; see Figure 8-1 26
Isolated supply voltage VISO 3.13 3.34 3.58 V VCC = 3.3 V ±10%, SEL shorted to GND2; External IISO = 0 to 30 mA 22
Isolated supply voltage VISO 3 3.34 3.58 V VCC = 3.3 V ±10%, SEL shorted to GND2; External IISO = 0 to 75 mA 22
Efficiency at maximum load current EFF 47 % IISO = 75 mA, CLOAD = 0.1 µF // 10 µF; VI = VSI (ISOW784x) 22
Current drawn from supply ICC 30 mA VCC = 3.3 V ±10%, SEL shorted to GND2; No external ILOAD; VI = 0 V (ISOW7844) 24
Propagation delay time tPLH, tPHL 14.5 20.2 ns VCC = 3.3 V ±10%, SEL shorted to GND2; see Figure 8-1 26
Propagation delay time tPLH, tPHL 13.5 19.6 ns VCC = 3.3 V ±10%, SEL shorted to VISO; see Figure 8-1 26
Positive-going UVLO threshold on VCC, VISO VCC+(UVLO) 2.7 V 13
Negative-going UVLO threshold on VCC, VISO VCC-(UVLO) 2.1 V 13
UVLO threshold hysteresis on VCC, VISO VHYS (UVLO) 0.2 V 13

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper pins. Ensure that enough copper is present on both GND pins to prevent the internal junction temperature of the 43

CAD (KiCad official)

  • Symbol: ISOW7844DWE
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: isow7844dwe-etched.step / isow7844dwe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isow7844dwe.step / isow7844dwe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (58 pp, sha256 dd05ae9e3ce84dfc, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF