Generated by kicad-footprint-generator · KiCad file format 20260206
ISOW7844DWE
Texas Instruments · Digital Isolators · SOIC-16-300mil
ISOW7844DWE from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage for the primary side, referenced to GND1. |
| 2 | GND1 | power_in | Ground connection for VCC. |
| 3 | OUTA | output | Output channel A. |
| 4 | OUTB | output | Output channel B. |
| 5 | OUTC | output | Output channel C. |
| 6 | OUTD | output | Output channel D. |
| 7 | NC | unconnected | Not connected. |
| 8 | GND1 | power_in | Ground connection for VCC. |
| 9 | GND2 | power_in | Ground connection for VISO. |
| 10 | SEL | input | VISO selection pin: VISO = 5 V when SEL is shorted to VISO; VISO = 3.3 V when SEL is shorted to GND2 or left floating (see Section 9.4). |
| 11 | IND | input | Input channel D. |
| 12 | INC | input | Input channel C. |
| 13 | INB | input | Input channel B. |
| 14 | INA | input | Input channel A. |
| 15 | GND2 | power_in | Ground connection for VISO. |
| 16 | VISO | power_out | Isolated supply voltage, determined by the SEL pin (5 V or 3.3 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.5 | 6 | V | 9 | ||
| Isolated supply voltage | VISO | -0.5 | 6 | V | 9 | ||
| Voltage at INx, OUTx, SEL pins | VIO | -0.5 | V | Printed as VCC + 0.5 / VISO + 0.5; max not numeric, see review | 9 | ||
| Maximum output current through data channels | IO | -15 | 15 | mA | 9 | ||
| Junction temperature | TJ | 150 | °C | 9 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 9 | ||
| Supply voltage | VCC | 3 | 5.5 | V | 9 | ||
| High level output current | IOH | -4 | mA | VSO = 5 V | 9 | ||
| High level output current | IOH | -2 | mA | VSO = 3.3 V | 9 | ||
| Low level output current | IOL | 4 | mA | VSO = 5 V | 9 | ||
| Low level output current | IOL | 2 | mA | VSO = 3.3 V | 9 | ||
| Low-level input voltage | VIL | 0 | V | Printed as 0.3 × VSI; max not numeric, see review | 9 | ||
| Data rate | DR | 100 | Mbps | 9 | |||
| Ambient temperature | TA | -40 | 125 | °C | 9 | ||
| Isolated supply voltage | VISO | 4.75 | 5.07 | 5.43 | V | VCC = 5 V ±10%; External IISO = 0 to 50 mA | 13 |
| Isolated supply voltage | VISO | 4.5 | 5.07 | 5.43 | V | VCC = 5 V ±10%; External IISO = 0 to 130 mA | 13 |
| DC line regulation | VISO(LINE) | 2 | mV/V | IISO = 50 mA, VCC = 4.5 V to 5.5 V | 13 | ||
| DC load regulation | VISO(LOAD) | 1 | % | IISO = 0 to 130 mA | 13 | ||
| Efficiency at maximum load current | EFF | 53 | % | IISO = 130 mA, CLOAD = 0.1 µF // 10 µF; VI = VSI (ISOW784x) | 13 | ||
| Low level input current | IIL | -10 | µA | VIL = 0 at INx or SEL | 13 | ||
| High level input current | IIH | 10 | µA | VIH = VSI at INx or SEL | 13 | ||
| Low level output voltage | VOL | 0.2 | 0.4 | V | IO = 4 mA, see Figure 8-1 | 13 | |
| Common mode transient immunity | CMTI | 100 | kV/us | VI = VSI or 0 V, VCM = 1000 V; see Figure 8-2 | 13 | ||
| DC current from supply under short circuit on VISO | ICC_SC | 137 | mA | VISO shorted to GND2 | 13 | ||
| Output ripple on isolated supply (pk-pk) | VISO(RIP) | 100 | mV | 20-MHz bandwidth, CLOAD = 0.1 µF // 20 µF, IISO = 130 mA | 13 | ||
| Current drawn from supply | ICC | 17 | mA | No external ILOAD; VI = VSI (ISOW7844) | 14 | ||
| Current drawn from supply | ICC | 24 | mA | All channels switching, 10 Mbps; CL = 15 pF, No external ILOAD | 14 | ||
| Current available to isolated supply | IISO(OUT) | 130 | mA | VI = VSI (ISOW7844) | 14 | ||
| Current available to isolated supply | IISO(OUT) | 126 | mA | All channels switching, 1 Mbps; CL = 15 pF | 14 | ||
| Propagation delay time | tPLH, tPHL | 13 | 17.6 | ns | VCC = 5 V ±10%, SEL shorted to VISO; see Figure 8-1 | 26 | |
| Pulse width distortion | PWD | 0.6 | 4.7 | ns | /tPHL, tPLH/; VCC = 5 V ±10%, SEL shorted to VISO | 26 | |
| Output signal rise and fall times | tr, tf | 2 | 4 | ns | VCC = 5 V ±10%, SEL shorted to VISO | 26 | |
| Isolated supply voltage | VISO | 3.13 | 3.34 | 3.56 | V | VCC = 5 V ±10%, SEL shorted to GND2; External IISO = 0 to 50 mA | 18 |
| Isolated supply voltage | VISO | 3 | 3.34 | 3.56 | V | VCC = 5 V ±10%, SEL shorted to GND2; External IISO = 0 to 130 mA | 18 |
| Efficiency at maximum load current | EFF | 48 | % | IISO = 130 mA, CLOAD = 0.1 µF // 10 µF; VI = VSI (ISOW784x) | 18 | ||
| Low level output voltage | VOL | 0.1 | 0.3 | V | IO = 2 mA, see Figure 8-1 | 18 | |
| Current drawn from supply | ICC | 21 | mA | VCC = 5 V ±10%, SEL shorted to GND2; No external ILOAD; VI = 0 V (ISOW7844) | 20 | ||
| Propagation delay time | tPLH, tPHL | 14 | 19.7 | ns | VCC = 5 V ±10%, SEL shorted to GND2; see Figure 8-1 | 26 | |
| Isolated supply voltage | VISO | 3.13 | 3.34 | 3.58 | V | VCC = 3.3 V ±10%, SEL shorted to GND2; External IISO = 0 to 30 mA | 22 |
| Isolated supply voltage | VISO | 3 | 3.34 | 3.58 | V | VCC = 3.3 V ±10%, SEL shorted to GND2; External IISO = 0 to 75 mA | 22 |
| Efficiency at maximum load current | EFF | 47 | % | IISO = 75 mA, CLOAD = 0.1 µF // 10 µF; VI = VSI (ISOW784x) | 22 | ||
| Current drawn from supply | ICC | 30 | mA | VCC = 3.3 V ±10%, SEL shorted to GND2; No external ILOAD; VI = 0 V (ISOW7844) | 24 | ||
| Propagation delay time | tPLH, tPHL | 14.5 | 20.2 | ns | VCC = 3.3 V ±10%, SEL shorted to GND2; see Figure 8-1 | 26 | |
| Propagation delay time | tPLH, tPHL | 13.5 | 19.6 | ns | VCC = 3.3 V ±10%, SEL shorted to VISO; see Figure 8-1 | 26 | |
| Positive-going UVLO threshold on VCC, VISO | VCC+(UVLO) | 2.7 | V | 13 | |||
| Negative-going UVLO threshold on VCC, VISO | VCC-(UVLO) | 2.1 | V | 13 | |||
| UVLO threshold hysteresis on VCC, VISO | VHYS (UVLO) | 0.2 | V | 13 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | pins. Ensure that enough copper is present on both GND pins to prevent the internal junction temperature of the | 43 |
CAD (KiCad official)
- Symbol:
ISOW7844DWE - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
isow7844dwe-etched.step/isow7844dwe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isow7844dwe.step/isow7844dwe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (58 pp, sha256
dd05ae9e3ce84dfc, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).